Files
wheel_rfm69_counter/avr_code/states.h
T
thebears bbdcc1e623 Refactor firmware for clarity; no functional changes
- main.c: file-header comment describing the hardware and operation, logic
  split into named phases (sleep_until_interrupt, wake_peripheral_rails,
  take_counts_snapshot, send_wheel_counts_report, handle_minute_alarm,
  init_all_hardware); shared state renamed to say what it is and made static.
- rfm69.c: reorganized into six labeled sections; cond_1/2/3 and hash scratch
  globals replaced by a reply_acknowledges() helper with clear locals; packet
  layout and every init register write documented.
- LOG() macro (compiled out when DO_UART is off) replaces the #if DO_UART
  blocks that obscured the logic.
- Drivers: file-header comments; named RTC_REG_*/RTC_ALM_MASK_BIT constants;
  EEPROM spool scheme documented; ADC_CHANNEL_BANDGAP named; repeated pin
  if/else helpers collapsed to SET_PIN_TO().
- Removed unused globals/buffers and commented-out code; ran clang-format
  with the project style.

Register writes and radio protocol are byte-identical. Builds clean under
-Wall -Wextra on gnu17 and c23; flash 13028 -> 12830 B, static RAM
1038 -> 999 B.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01YVJKatfeMJjAmuH9KYiLuv
2026-08-31 23:04:00 -04:00

42 lines
884 B
C

/*
* File: states.h
* Author: thebears
*
* Created on December 6, 2024, 10:01 AM
*/
#ifndef STATES_H
#define STATES_H
#include <avr/io.h>
#include <stdbool.h>
#define SET_PIN_OUT(DDR, PIN) ((DDR) |= (1 << (PIN))) // Set pin as output
#define SET_PIN_IN(DDR, PIN) ((DDR) &= ~(1 << (PIN))) // Set pin as input
#define SET_PIN_HIGH(PORT, PIN) ((PORT) |= (1 << (PIN))) // Set pin high
#define SET_PIN_LOW(PORT, PIN) ((PORT) &= ~(1 << (PIN))) // Set pin low
// Drive a pin to a boolean level
#define SET_PIN_TO(PORT, PIN, level) ((level) ? SET_PIN_HIGH(PORT, PIN) : SET_PIN_LOW(PORT, PIN))
#ifdef __cplusplus
extern "C" {
#endif
void init_spi(void);
void rfm69_reset_state(bool state);
void led_1_set_state(bool state);
void led_2_set_state(bool state);
void led_3_set_state(bool state);
void ldo_set_state(bool state);
#ifdef __cplusplus
}
#endif
#endif /* STATES_H */