I2C device found at 0x1C
I2C device found at 0x21
I2C device found at 0x24
I2C device found at 0x25
I2C device found at 0x26
I2C device found at 0x27
I2C device found at 0x28
I2C device found at 0x29
I2C device found at 0x2C
I2C device found at 0x2D
I2C device found at 0x2E
I2C device found at 0x2F
I2C device found at 0x30
I2C device found at 0x36
I2C device found at 0x37
I2C scan complete: 16 device(s) found
Pin 17 set to LOW
[ 34643][V][esp32-hal-uart.c:330] uartBegin(): UART2 baud(9600) Mode(800001c) rxPin(5) txPin(6)
[ 34651][V][esp32-hal-uart.c:416] uartBegin(): UART2 not installed. Starting installation
[ 34660][V][esp32-hal-uart.c:467] uartBegin(): UART2 initialization done.
MODBUS RS485 initialized: RXD=pin5, TXD=pin6, Baud=9600
Sending init command (FC06 Write Single Register)...
Init Response: C0 (total: 1 bytes)
MODBUS TX: 01 03 00 04 00 01 C5 CB (CRC)
Setup complete

MODBUS RX: 01 03 02 00 02 39 85 (total: 7 bytes)
Data Value:     0x0002 (2)
Received CRC:   0x8539
Calculated CRC: 0x8539
CRC Check: PASSED

MODBUS TX: 01 03 00 04 00 01 C5 CB (CRC)
MODBUS RX: 01 03 02 00 02 39 85 (total: 7 bytes)
Data Value:     0x0002 (2)
Received CRC:   0x8539
Calculated CRC: 0x8539
CRC Check: PASSED

MODBUS TX: 01 03 00 04 00 01 C5 CB (CRC)
MODBUS RX: 01 03 02 00 02 39 85 (total: 7 bytes)
Data Value:     0x0002 (2)
Received CRC:   0x8539
Calculated CRC: 0x8539
CRC Check: PASSED

MODBUS TX: 01 03 00 04 00 01 C5 CB (CRC)
MODBUS RX: 01 03 02 00 02 39 85 (total: 7 bytes)
Data Value:     0x0002 (2)
Received CRC:   0x8539
Calculated CRC: 0x8539
CRC Check: PASSED

MODBUS TX: 01 03 00 04 00 01 C5 CB (CRC)
MODBUS RX: 01 03 02 00 02 39 85 (total: 7 bytes)
Data Value:     0x0002 (2)
Received CRC:   0x8539
Calculated CRC: 0x8539
CRC Check: PASSED