Files

Marcio Teixeira 4880ac6533 Added a light-weight status screen for the ST7920

- The status screen uses the ST7920 character generator to greatly
  reduce SPI traffic and MCU load when updating the status screen.

- Has been tested with the RepRapDiscount Full Graphics Smart Controller
  but should work with any LCD that uses an ST7920 or fully compatible
  controller.

2018-02-14 14:43:54 -07:00

Dual-head

Added a light-weight status screen for the ST7920

2018-02-14 14:43:54 -07:00

Configuration_adv.h

TMC SW SPI pins in Configuration_adv.h

2018-02-08 18:49:38 -06:00

Configuration.h

Added a light-weight status screen for the ST7920

2018-02-14 14:43:54 -07:00

README.md

Config updates

2017-09-21 15:52:17 -05:00

README.md

Configuration for Velleman K8400 Vertex

http://www.k8400.eu/

Configuration files for the K8400, ported upstream from the official Velleman firmware. Like its predecessor, (K8200), the K8400 is a 3Drag clone. There are some minor differences, documented in pins_K8400.h.

Single and dual head configurations provided. Copy the correct Configuration.h and Configuration_adv.h to the /src/config directory.

NOTE: This configuration includes the community sourced feed rate fix. Use 100% feed rate in Repetier!

For implementation and updated K8400 firmware, see https://github.com/birkett/Velleman-K8400-Firmware

Original Sources

Credit to Velleman for the original 1.0.x based code:
http://www.vertex3dprinter.eu/downloads/files/vertex/firmware/vertex-m1-v1.4-h2.zip