thebears/marlin_skr
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Files
4479b0222bb66dd54f2c60f50a35a9d35f3230dc
marlin_skr/Marlin/src/module
History
Katelyn Schiesser 4479b0222b 🐛 Followup to TEMP_SENSOR_BOARD (#22343, #22344) 
Followup to #22279
2021-07-12 23:01:29 -05:00
..
stepper
♻️ Consolidate PSU_CONTROL (#22304)
2021-07-12 00:13:58 -05:00
thermistor
✨ Add TEMP_SENSOR_BOARD (#22279)
2021-07-11 20:41:33 -05:00
delta.cpp
⚡️ Improve Sensorless homing/probing for G28, G33 (#21899)
2021-07-12 19:19:29 -05:00
delta.h
Replace 'const float &' with 'const_float_t' (#21505)
2021-04-01 17:59:57 -05:00
endstops.cpp
⚡️ Improve Sensorless homing/probing for G28, G33 (#21899)
2021-07-12 19:19:29 -05:00
endstops.h
🐛 Fix Z endstop enum
2021-06-11 18:33:07 -05:00
motion.cpp
🐛 Redundant Temp Sensor followup (#22196)
2021-07-06 19:36:41 -05:00
motion.h
⚡️ Home Z (and maybe XY) at the start of G35 (#22060)
2021-06-14 17:02:21 -05:00
planner_bezier.cpp
🏗️ Support for up to 6 linear axes (#19112)
2021-06-05 02:18:47 -05:00
planner_bezier.h
Replace 'const float &' with 'const_float_t' (#21505)
2021-04-01 17:59:57 -05:00
planner.cpp
⚡️ Improve Sensorless homing/probing for G28, G33 (#21899)
2021-07-12 19:19:29 -05:00
planner.h
⚡️ Improve Sensorless homing/probing for G28, G33 (#21899)
2021-07-12 19:19:29 -05:00
printcounter.cpp
Don't display service prompt unless needed (#21654)
2021-04-24 00:09:51 -05:00
printcounter.h
Configure / disable PRINTCOUNTER save interval (#20856)
2021-01-26 02:30:31 -06:00
probe.cpp
⚡️ Improve Sensorless homing/probing for G28, G33 (#21899)
2021-07-12 19:19:29 -05:00
probe.h
⚡️ Improve Sensorless homing/probing for G28, G33 (#21899)
2021-07-12 19:19:29 -05:00
scara.cpp
🎨 Flags for homing directions
2021-05-20 00:59:58 -05:00
scara.h
Replace 'const float &' with 'const_float_t' (#21505)
2021-04-01 17:59:57 -05:00
servo.cpp
More IntelliSense-friendly declarations
2021-03-24 05:50:47 -05:00
servo.h
Remove extraneous 'extern' hints (#21516)
2021-04-02 14:22:43 -05:00
settings.cpp
🚸 M666: Fix value filter, add report (#22337)
2021-07-11 18:25:51 -05:00
settings.h
Optimize MarlinSettings with template methods (#21426)
2021-03-24 07:32:08 -05:00
speed_lookuptable.h
Fix links to secure sites (#18745)
2020-07-22 22:20:14 -05:00
stepper.cpp
🐛 Fix Z_MULTI_ENDSTOPS + NUM_Z_STEPPER_DRIVERS 4 compile (#22203)
2021-06-26 13:28:56 -05:00
stepper.h
🏗️ Support for up to 6 linear axes (#19112)
2021-06-05 02:18:47 -05:00
temperature.cpp
🐛 Followup to TEMP_SENSOR_BOARD (#22343, #22344)
2021-07-12 23:01:29 -05:00
temperature.h
🐛 Followup to TEMP_SENSOR_BOARD (#22343, #22344)
2021-07-12 23:01:29 -05:00
tool_change.cpp
🏗️ Support for up to 6 linear axes (#19112)
2021-06-05 02:18:47 -05:00
tool_change.h
Tool sensors (#17239)
2021-04-16 08:02:31 -05:00