Tanguy Pruvot 1555db237e 🚸 Fewer CRs in settings report (#22560)

2021-08-12 22:40:52 -05:00

..

stepper

🐛 Spellcheck comments (#22496)

2021-08-03 19:02:34 -05:00

thermistor

🐛 Spellcheck comments (#22496)

2021-08-03 19:02:34 -05:00

delta.cpp

⚡️ Improve Sensorless homing/probing for G28, G33 (#21899)

2021-07-12 19:19:29 -05:00

delta.h

Replace 'const float &' with 'const_float_t' (#21505)

2021-04-01 17:59:57 -05:00

endstops.cpp

🐛 Spellcheck comments (#22496)

2021-08-03 19:02:34 -05:00

endstops.h

🐛 Fix up endstop flags (#22487)

2021-08-02 17:08:35 -05:00

motion.cpp

🐛 Prevent ABL G29 setting a funky feedrate

2021-08-04 16:37:02 -05:00

motion.h

⚡️ Home Z (and maybe XY) at the start of G35 (#22060)

2021-06-14 17:02:21 -05:00

planner_bezier.cpp

🏗️ Support for up to 6 linear axes (#19112)

2021-06-05 02:18:47 -05:00

planner_bezier.h

Replace 'const float &' with 'const_float_t' (#21505)

2021-04-01 17:59:57 -05:00

planner.cpp

🐛 Fix CoreXY plus extra axes

2021-08-09 16:07:15 -05:00

planner.h

🐛 Spellcheck comments (#22496)

2021-08-03 19:02:34 -05:00

printcounter.cpp

Don't display service prompt unless needed (#21654)

2021-04-24 00:09:51 -05:00

printcounter.h

Configure / disable PRINTCOUNTER save interval (#20856)

2021-01-26 02:30:31 -06:00

probe.cpp

🐛 Fix PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED

2021-07-29 22:23:36 -05:00

probe.h

🔧 HAS_CUSTOM_PROBE_PIN => USES_Z_MIN_PROBE_PIN

2021-07-28 23:24:30 -05:00

scara.cpp

🎨 Flags for homing directions

2021-05-20 00:59:58 -05:00

scara.h

Replace 'const float &' with 'const_float_t' (#21505)

2021-04-01 17:59:57 -05:00

servo.cpp

More IntelliSense-friendly declarations

2021-03-24 05:50:47 -05:00

servo.h

Remove extraneous 'extern' hints (#21516)

2021-04-02 14:22:43 -05:00

settings.cpp

🚸 Fewer CRs in settings report (#22560)

2021-08-12 22:40:52 -05:00

settings.h

Optimize MarlinSettings with template methods (#21426)

2021-03-24 07:32:08 -05:00

speed_lookuptable.h

Fix links to secure sites (#18745)

2020-07-22 22:20:14 -05:00

stepper.cpp

🐛 Fix report_a_position ABC criteria

2021-08-04 17:01:42 -05:00

stepper.h

🏗️ Support for up to 6 linear axes (#19112)

2021-06-05 02:18:47 -05:00

temperature.cpp

🐛 Fix fan index for Singlenozzle, chamber fan

2021-08-05 23:24:20 -05:00

temperature.h

🐛 Followup to TEMP_SENSOR_BOARD (#22343, #22344)

2021-07-12 23:01:29 -05:00

tool_change.cpp

🐛 Fix extra E move in toolchange with ..._NO_RETURN (#22504)

2021-08-03 23:45:08 -05:00

tool_change.h

Tool sensors (#17239)

2021-04-16 08:02:31 -05:00