thebears/marlin_skr
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Files
0eda34e07d6b15ac889d21d84457401683c0345f
marlin_skr/Marlin/src/module
History
DerAndere 0eda34e07d 🐛 Followup to 6 linear axes (#22482)
2021-08-02 00:13:57 -05:00
..
stepper
M256 LCD brightness (#22478)
2021-08-01 14:28:53 -05:00
thermistor
🐛 Board Temp Sensor followup (#22350)
2021-07-13 19:08:04 -05:00
delta.cpp
⚡️ Improve Sensorless homing/probing for G28, G33 (#21899)
2021-07-12 19:19:29 -05:00
delta.h
Replace 'const float &' with 'const_float_t' (#21505)
2021-04-01 17:59:57 -05:00
endstops.cpp
🐛 Followup to 6 linear axes (#22482)
2021-08-02 00:13:57 -05:00
endstops.h
🐛 Followup to 6 linear axes (#22482)
2021-08-02 00:13:57 -05:00
motion.cpp
🐛 Redundant Temp Sensor followup (#22196)
2021-07-06 19:36:41 -05:00
motion.h
⚡️ Home Z (and maybe XY) at the start of G35 (#22060)
2021-06-14 17:02:21 -05:00
planner_bezier.cpp
🏗️ Support for up to 6 linear axes (#19112)
2021-06-05 02:18:47 -05:00
planner_bezier.h
Replace 'const float &' with 'const_float_t' (#21505)
2021-04-01 17:59:57 -05:00
planner.cpp
🐛 Fix 5-axis no extruder compile
2021-07-29 19:55:04 -05:00
planner.h
⚡️ Improve Sensorless homing/probing for G28, G33 (#21899)
2021-07-12 19:19:29 -05:00
printcounter.cpp
Don't display service prompt unless needed (#21654)
2021-04-24 00:09:51 -05:00
printcounter.h
Configure / disable PRINTCOUNTER save interval (#20856)
2021-01-26 02:30:31 -06:00
probe.cpp
🐛 Fix PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED
2021-07-29 22:23:36 -05:00
probe.h
🔧 HAS_CUSTOM_PROBE_PIN => USES_Z_MIN_PROBE_PIN
2021-07-28 23:24:30 -05:00
scara.cpp
🎨 Flags for homing directions
2021-05-20 00:59:58 -05:00
scara.h
Replace 'const float &' with 'const_float_t' (#21505)
2021-04-01 17:59:57 -05:00
servo.cpp
More IntelliSense-friendly declarations
2021-03-24 05:50:47 -05:00
servo.h
Remove extraneous 'extern' hints (#21516)
2021-04-02 14:22:43 -05:00
settings.cpp
M256 LCD brightness (#22478)
2021-08-01 14:28:53 -05:00
settings.h
Optimize MarlinSettings with template methods (#21426)
2021-03-24 07:32:08 -05:00
speed_lookuptable.h
Fix links to secure sites (#18745)
2020-07-22 22:20:14 -05:00
stepper.cpp
🐛 Fix Z_MULTI_ENDSTOPS + NUM_Z_STEPPER_DRIVERS 4 compile (#22203)
2021-06-26 13:28:56 -05:00
stepper.h
🏗️ Support for up to 6 linear axes (#19112)
2021-06-05 02:18:47 -05:00
temperature.cpp
🚚 Relocate and adjust DWIN E3V2 (#22471)
2021-07-31 05:32:13 -05:00
temperature.h
🐛 Followup to TEMP_SENSOR_BOARD (#22343, #22344)
2021-07-12 23:01:29 -05:00
tool_change.cpp
🏗️ Support for up to 6 linear axes (#19112)
2021-06-05 02:18:47 -05:00
tool_change.h
Tool sensors (#17239)
2021-04-16 08:02:31 -05:00