thebears/marlin_skr
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Files
07befb545b2bc6ea284d444637a039127af6b4d1
marlin_skr/Marlin/src/module
History
BigTreeTech 07befb545b ✨ Support for BIQU B1-SE-Plus strain gauge probe (#23101) 
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2021-11-10 09:56:10 -06:00
..
stepper
🐛 Fix børken E_DUAL_STEPPER_DRIVERS (#23017)
2021-10-25 15:53:37 -05:00
thermistor
✅ Warn about dummy thermistors
2021-10-18 01:54:51 -05:00
delta.cpp
🚸 G33 R and O options (#22707)
2021-09-12 19:35:37 -05:00
delta.h
🚸 G33 R and O options (#22707)
2021-09-12 19:35:37 -05:00
endstops.cpp
✨ Support for BIQU B1-SE-Plus strain gauge probe (#23101)
2021-11-10 09:56:10 -06:00
endstops.h
🐛 No probe enum for DELTA + SENSORLESS_PROBING
2021-09-11 02:49:20 -05:00
motion.cpp
🐛 Fix IDEX + DISABLE_INACTIVE_EXTRUDER (#22925)
2021-10-12 18:40:56 -05:00
motion.h
Polargraph / Makelangelo kinematics (#22790)
2021-09-20 15:45:00 -05:00
planner_bezier.cpp
🏗️ Support for up to 6 linear axes (#19112)
2021-06-05 02:18:47 -05:00
planner_bezier.h
Replace 'const float &' with 'const_float_t' (#21505)
2021-04-01 17:59:57 -05:00
planner.cpp
⚗️ Use pwm_set_duty over analogWrite to set PWM (#23048)
2021-11-02 00:47:16 -05:00
planner.h
🎨 steps_to_mm => mm_per_step (#22847)
2021-09-27 14:05:52 -05:00
polargraph.cpp
Polargraph / Makelangelo kinematics (#22790)
2021-09-20 15:45:00 -05:00
polargraph.h
Polargraph / Makelangelo kinematics (#22790)
2021-09-20 15:45:00 -05:00
printcounter.cpp
🎨 Fewer serial macros
2021-09-09 05:41:58 -05:00
printcounter.h
Configure / disable PRINTCOUNTER save interval (#20856)
2021-01-26 02:30:31 -06:00
probe.cpp
🚸 Indicate Preheating for probe / leveling (#23088)
2021-11-07 01:09:15 -05:00
probe.h
🎨 Fix L64xx enable, clean up conditionals
2021-09-21 06:28:58 -05:00
scara.cpp
🎨 Fewer serial macros
2021-09-09 05:41:58 -05:00
scara.h
Replace 'const float &' with 'const_float_t' (#21505)
2021-04-01 17:59:57 -05:00
servo.cpp
✨ M282 - Detach Servo (#22760)
2021-09-14 19:00:48 -05:00
servo.h
✨ M282 - Detach Servo (#22760)
2021-09-14 19:00:48 -05:00
settings.cpp
🩹 Fix M503 report (#23084)
2021-11-06 23:16:18 -05:00
settings.h
Optimize MarlinSettings with template methods (#21426)
2021-03-24 07:32:08 -05:00
speed_lookuptable.h
Fix links to secure sites (#18745)
2020-07-22 22:20:14 -05:00
stepper.cpp
⚗️ Use pwm_set_duty over analogWrite to set PWM (#23048)
2021-11-02 00:47:16 -05:00
stepper.h
🩹 Fix EXTRUDER 0 compile warning (#22868)
2021-10-04 01:12:19 -05:00
temperature.cpp
⚗️ Use pwm_set_duty over analogWrite to set PWM (#23048)
2021-11-02 00:47:16 -05:00
temperature.h
🎨 Standard 'cooldown' method
2021-10-29 19:18:35 -05:00
tool_change.cpp
Fix Tool Change Park (#22968)
2021-10-18 00:01:28 -06:00
tool_change.h
Tool sensors (#17239)
2021-04-16 08:02:31 -05:00