thebears/marlin_skr
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Add Formbot Raptor2 and Raise3D pins (#12532)

Browse Source 
* Add Formbot Raptor2 board
* Add Raise3D Rumba board
This commit is contained in:
InsanityAutomation
2018-11-25 20:56:06 -05:00
committed by Scott Lahteine
parent 6aae199572
commit dec721c52b
7 changed files with 147 additions and 22 deletions
Download Patch File Download Diff File Expand all files Collapse all files

40
Marlin/src/pins/pins_RUMBA.h
View File

@@ -32,13 +32,17 @@
#error "RUMBA supports up to 3 hotends / E-steppers. Comment out this line to continue."
#endif
#define DEFAULT_MACHINE_NAME "Rumba"
#define BOARD_NAME "Rumba"
#ifndef DEFAULT_MACHINE_NAME
#define DEFAULT_MACHINE_NAME "Rumba"
#endif
#ifndef BOARD_NAME
#define BOARD_NAME "Rumba"
#endif
//
// Servos
//
#define SERVO0_PIN 5
#define SERVO0_PIN 5
//
// Limit Switches
@@ -87,16 +91,20 @@
//
// Temperature Sensors
//
#if TEMP_SENSOR_0 == -1
#define TEMP_0_PIN 6 // Analog Input (connector *K1* on RUMBA thermocouple ADD ON is used)
#else
#define TEMP_0_PIN 15 // Analog Input (default connector for thermistor *T0* on rumba board is used)
#ifndef TEMP_0_PIN
#if TEMP_SENSOR_0 == -1
#define TEMP_0_PIN 6 // Analog Input (connector *K1* on RUMBA thermocouple ADD ON is used)
#else
#define TEMP_0_PIN 15 // Analog Input (default connector for thermistor *T0* on rumba board is used)
#endif
#endif
#if TEMP_SENSOR_1 == -1
#define TEMP_1_PIN 5 // Analog Input (connector *K2* on RUMBA thermocouple ADD ON is used)
#else
#define TEMP_1_PIN 14 // Analog Input (default connector for thermistor *T1* on rumba board is used)
#ifndef TEMP_1_PIN
#if TEMP_SENSOR_1 == -1
#define TEMP_1_PIN 5 // Analog Input (connector *K2* on RUMBA thermocouple ADD ON is used)
#else
#define TEMP_1_PIN 14 // Analog Input (default connector for thermistor *T1* on rumba board is used)
#endif
#endif
#if TEMP_SENSOR_2 == -1
@@ -105,7 +113,7 @@
#define TEMP_2_PIN 13 // Analog Input (default connector for thermistor *T2* on rumba board is used)
#endif
// optional for extruder 4 or chamber:
// Optional for extruder 4 or chamber:
//#define TEMP_X_PIN 12 // Analog Input (default connector for thermistor *T3* on rumba board is used)
//#define TEMP_CHAMBER_PIN 12 // Analog Input (default connector for thermistor *T3* on rumba board is used)
@@ -142,13 +150,13 @@
// M3/M4/M5 - Spindle/Laser Control
//
#ifndef SPINDLE_LASER_PWM_PIN
#define SPINDLE_LASER_PWM_PIN 4 // MUST BE HARDWARE PWM. Pin 4 interrupts OC0* and OC1* always in use?
#define SPINDLE_LASER_PWM_PIN 4 // MUST BE HARDWARE PWM. Pin 4 interrupts OC0* and OC1* always in use?
#endif
#ifndef SPINDLE_LASER_ENABLE_PIN
#define SPINDLE_LASER_ENABLE_PIN 14 // Pin should have a pullup!
#endif
#ifndef SPINDLE_DIR_PIN
#define SPINDLE_DIR_PIN 15
#define SPINDLE_DIR_PIN 15
#endif
//
@@ -162,8 +170,8 @@
#define BTN_ENC 43
#if ENABLED(MKS_12864OLED) || ENABLED(MKS_12864OLED_SSD1306)
#define LCD_PINS_DC 38 // Set as output on init
#define LCD_PINS_RS 41 // Pull low for 1s to init
#define LCD_PINS_DC 38 // Set as output on init
#define LCD_PINS_RS 41 // Pull low for 1s to init
// DOGM SPI LCD Support
#define DOGLCD_CS 19
#define DOGLCD_MOSI 42