🎨 General cleanup of extui/dgus

In relation to #22121
2021-06-13 20:19:43 -05:00
parent 82ac7da0a7
commit d5510ea519
11 changed files with 405 additions and 457 deletions
--- a/Marlin/src/lcd/extui/dgus/hiprecy/DGUSDisplayDef.cpp
+++ b/Marlin/src/lcd/extui/dgus/hiprecy/DGUSDisplayDef.cpp
@@ -48,11 +48,11 @@ const uint16_t VPList_Boot[] PROGMEM = {

 const uint16_t VPList_Main[] PROGMEM = {
  /* VP_M117, for completeness, but it cannot be auto-uploaded. */
-  #if HOTENDS >= 1
+  #if HAS_HOTEND
    VP_T_E0_Is, VP_T_E0_Set, VP_E0_STATUS,
-  #endif
-  #if HOTENDS >= 2
-    VP_T_E1_Is, VP_T_E1_Set,
+    #if HOTENDS >= 2
+      VP_T_E1_Is, VP_T_E1_Set,
+    #endif
  #endif
  #if HAS_HEATED_BED
    VP_T_Bed_Is, VP_T_Bed_Set, VP_BED_STATUS,
@@ -70,11 +70,11 @@ const uint16_t VPList_Main[] PROGMEM = {
 };

 const uint16_t VPList_Temp[] PROGMEM = {
-  #if HOTENDS >= 1
+  #if HAS_HOTEND
    VP_T_E0_Is, VP_T_E0_Set,
-  #endif
-  #if HOTENDS >= 2
-    VP_T_E1_Is, VP_T_E1_Set,
+    #if HOTENDS >= 2
+      VP_T_E1_Is, VP_T_E1_Set,
+    #endif
  #endif
  #if HAS_HEATED_BED
    VP_T_Bed_Is, VP_T_Bed_Set,
@@ -84,11 +84,11 @@ const uint16_t VPList_Temp[] PROGMEM = {

 const uint16_t VPList_Status[] PROGMEM = {
  /* VP_M117, for completeness, but it cannot be auto-uploaded */
-  #if HOTENDS >= 1
+  #if HAS_HOTEND
    VP_T_E0_Is, VP_T_E0_Set,
-  #endif
-  #if HOTENDS >= 2
-    VP_T_E1_Is, VP_T_E1_Set,
+    #if HOTENDS >= 2
+      VP_T_E1_Is, VP_T_E1_Set,
+    #endif
  #endif
  #if HAS_HEATED_BED
    VP_T_Bed_Is, VP_T_Bed_Set,
@@ -105,11 +105,11 @@ const uint16_t VPList_Status[] PROGMEM = {

 const uint16_t VPList_Status2[] PROGMEM = {
  /* VP_M117, for completeness, but it cannot be auto-uploaded */
-  #if HOTENDS >= 1
+  #if HAS_HOTEND
    VP_Flowrate_E0,
-  #endif
-  #if HOTENDS >= 2
-    VP_Flowrate_E1,
+    #if HOTENDS >= 2
+      VP_Flowrate_E1,
+    #endif
  #endif
  VP_PrintProgress_Percentage,
  VP_PrintTime,
@@ -117,11 +117,11 @@ const uint16_t VPList_Status2[] PROGMEM = {
 };

 const uint16_t VPList_Preheat[] PROGMEM = {
-  #if HOTENDS >= 1
+  #if HAS_HOTEND
    VP_T_E0_Is, VP_T_E0_Set,
-  #endif
-  #if HOTENDS >= 2
-    VP_T_E1_Is, VP_T_E1_Set,
+    #if HOTENDS >= 2
+      VP_T_E1_Is, VP_T_E1_Set,
+    #endif
  #endif
  #if HAS_HEATED_BED
    VP_T_Bed_Is, VP_T_Bed_Set,
@@ -135,11 +135,11 @@ const uint16_t VPList_ManualMove[] PROGMEM = {
 };

 const uint16_t VPList_ManualExtrude[] PROGMEM = {
-  #if HOTENDS >= 1
+  #if HAS_HOTEND
    VP_T_E0_Is, VP_T_E0_Set,
-  #endif
-  #if HOTENDS >= 2
-    VP_T_E1_Is, VP_T_E1_Set,
+    #if HOTENDS >= 2
+      VP_T_E1_Is, VP_T_E1_Set,
+    #endif
  #endif
  VP_EPos,
  0x0000
@@ -156,22 +156,22 @@ const uint16_t VPList_SD_FlowRates[] PROGMEM = {
 };

 const uint16_t VPList_Filament_heating[] PROGMEM = {
-  #if HOTENDS >= 1
+  #if HAS_HOTEND
    VP_T_E0_Is, VP_T_E0_Set,
    VP_E0_FILAMENT_LOAD_UNLOAD,
-  #endif
-  #if HOTENDS >= 2
-    VP_T_E1_Is, VP_T_E1_Set,
+    #if HOTENDS >= 2
+      VP_T_E1_Is, VP_T_E1_Set,
+    #endif
  #endif
  0x0000
 };

 const uint16_t VPList_Filament_load_unload[] PROGMEM = {
-  #if HOTENDS >= 1
+  #if HAS_HOTEND
    VP_E0_FILAMENT_LOAD_UNLOAD,
-  #endif
-  #if HOTENDS >= 2
-    VP_E1_FILAMENT_LOAD_UNLOAD,
+    #if HOTENDS >= 2
+      VP_E1_FILAMENT_LOAD_UNLOAD,
+    #endif
  #endif
  0x0000
 };
@@ -183,11 +183,11 @@ const uint16_t VPList_SDFileList[] PROGMEM = {

 const uint16_t VPList_SD_PrintManipulation[] PROGMEM = {
  VP_PrintProgress_Percentage, VP_PrintTime,
-  #if HOTENDS >= 1
+  #if HAS_HOTEND
    VP_T_E0_Is, VP_T_E0_Set,
-  #endif
-  #if HOTENDS >= 2
-    VP_T_E1_Is, VP_T_E1_Set,
+    #if HOTENDS >= 2
+      VP_T_E1_Is, VP_T_E1_Set,
+    #endif
  #endif
  #if HAS_HEATED_BED
    VP_T_Bed_Is, VP_T_Bed_Set,
@@ -203,11 +203,11 @@ const uint16_t VPList_SD_PrintManipulation[] PROGMEM = {
 };

 const uint16_t VPList_SDPrintTune[] PROGMEM = {
-  #if HOTENDS >= 1
+  #if HAS_HOTEND
    VP_T_E0_Is, VP_T_E0_Set,
-  #endif
-  #if HOTENDS >= 2
-    VP_T_E1_Is, VP_T_E1_Set,
+    #if HOTENDS >= 2
+      VP_T_E1_Is, VP_T_E1_Set,
+    #endif
  #endif
  #if HAS_HEATED_BED
    VP_T_Bed_Is, VP_T_Bed_Set,
@@ -225,11 +225,11 @@ const uint16_t VPList_StepPerMM[] PROGMEM = {
  VP_X_STEP_PER_MM,
  VP_Y_STEP_PER_MM,
  VP_Z_STEP_PER_MM,
-  #if HOTENDS >= 1
+  #if HAS_HOTEND
    VP_E0_STEP_PER_MM,
-  #endif
-  #if HOTENDS >= 2
-    VP_E1_STEP_PER_MM,
+    #if HOTENDS >= 2
+      VP_E1_STEP_PER_MM,
+    #endif
  #endif
  0x0000
 };
@@ -268,7 +268,7 @@ const uint16_t VPList_PIDTuningWaiting[] PROGMEM = {
 };

 const uint16_t VPList_FLCPreheat[] PROGMEM = {
-  #if HOTENDS >= 1
+  #if HAS_HOTEND
    VP_T_E0_Is, VP_T_E0_Set,
  #endif
  #if HAS_HEATED_BED
@@ -278,14 +278,14 @@ const uint16_t VPList_FLCPreheat[] PROGMEM = {
 };

 const uint16_t VPList_FLCPrinting[] PROGMEM = {
-  #if HOTENDS >= 1
+  #if HAS_HOTEND
    VP_SD_Print_ProbeOffsetZ,
  #endif
  0x0000
 };

 const uint16_t VPList_Z_Offset[] PROGMEM = {
-  #if HOTENDS >= 1
+  #if HAS_HOTEND
    VP_SD_Print_ProbeOffsetZ,
  #endif
  0x0000
@@ -319,14 +319,6 @@ const struct VPMapping VPMap[] PROGMEM = {

 const char MarlinVersion[] PROGMEM = SHORT_BUILD_VERSION;

-// Helper to define a DGUS_VP_Variable for common use cases.
-#define VPHELPER(VPADR, VPADRVAR, RXFPTR, TXFPTR ) { .VP=VPADR, .memadr=VPADRVAR, .size=sizeof(VPADRVAR), \
-  .set_by_display_handler = RXFPTR, .send_to_display_handler = TXFPTR }
-
-// Helper to define a DGUS_VP_Variable when the sizeo of the var cannot be determined automaticalyl (eg. a string)
-#define VPHELPER_STR(VPADR, VPADRVAR, STRLEN, RXFPTR, TXFPTR ) { .VP=VPADR, .memadr=VPADRVAR, .size=STRLEN, \
-  .set_by_display_handler = RXFPTR, .send_to_display_handler = TXFPTR }
-
 const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
  // Helper to detect touch events
  VPHELPER(VP_SCREENCHANGE, nullptr, ScreenHandler.ScreenChangeHook, nullptr),
@@ -336,92 +328,92 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
  #endif
  VPHELPER(VP_CONFIRMED, nullptr, ScreenHandler.ScreenConfirmedOK, nullptr),

-  VPHELPER(VP_TEMP_ALL_OFF, nullptr, &ScreenHandler.HandleAllHeatersOff, nullptr),
+  VPHELPER(VP_TEMP_ALL_OFF, nullptr, ScreenHandler.HandleAllHeatersOff, nullptr),

  #if ENABLED(DGUS_UI_MOVE_DIS_OPTION)
-    VPHELPER(VP_MOVE_OPTION, &distanceToMove, &ScreenHandler.HandleManualMoveOption, nullptr),
+    VPHELPER(VP_MOVE_OPTION, &distanceToMove, ScreenHandler.HandleManualMoveOption, nullptr),
  #endif
  #if ENABLED(DGUS_UI_MOVE_DIS_OPTION)
-    VPHELPER(VP_MOVE_X, &distanceToMove, &ScreenHandler.HandleManualMove, nullptr),
-    VPHELPER(VP_MOVE_Y, &distanceToMove, &ScreenHandler.HandleManualMove, nullptr),
-    VPHELPER(VP_MOVE_Z, &distanceToMove, &ScreenHandler.HandleManualMove, nullptr),
-    VPHELPER(VP_HOME_ALL, &distanceToMove, &ScreenHandler.HandleManualMove, nullptr),
+    VPHELPER(VP_MOVE_X, &distanceToMove, ScreenHandler.HandleManualMove, nullptr),
+    VPHELPER(VP_MOVE_Y, &distanceToMove, ScreenHandler.HandleManualMove, nullptr),
+    VPHELPER(VP_MOVE_Z, &distanceToMove, ScreenHandler.HandleManualMove, nullptr),
+    VPHELPER(VP_HOME_ALL, &distanceToMove, ScreenHandler.HandleManualMove, nullptr),
  #else
-    VPHELPER(VP_MOVE_X, nullptr, &ScreenHandler.HandleManualMove, nullptr),
-    VPHELPER(VP_MOVE_Y, nullptr, &ScreenHandler.HandleManualMove, nullptr),
-    VPHELPER(VP_MOVE_Z, nullptr, &ScreenHandler.HandleManualMove, nullptr),
-    VPHELPER(VP_HOME_ALL, nullptr, &ScreenHandler.HandleManualMove, nullptr),
+    VPHELPER(VP_MOVE_X, nullptr, ScreenHandler.HandleManualMove, nullptr),
+    VPHELPER(VP_MOVE_Y, nullptr, ScreenHandler.HandleManualMove, nullptr),
+    VPHELPER(VP_MOVE_Z, nullptr, ScreenHandler.HandleManualMove, nullptr),
+    VPHELPER(VP_HOME_ALL, nullptr, ScreenHandler.HandleManualMove, nullptr),
  #endif
-  VPHELPER(VP_MOTOR_LOCK_UNLOK, nullptr, &ScreenHandler.HandleMotorLockUnlock, nullptr),
+  VPHELPER(VP_MOTOR_LOCK_UNLOK, nullptr, ScreenHandler.HandleMotorLockUnlock, nullptr),
  #if ENABLED(POWER_LOSS_RECOVERY)
-    VPHELPER(VP_POWER_LOSS_RECOVERY, nullptr, &ScreenHandler.HandlePowerLossRecovery, nullptr),
+    VPHELPER(VP_POWER_LOSS_RECOVERY, nullptr, ScreenHandler.HandlePowerLossRecovery, nullptr),
  #endif
-  VPHELPER(VP_SETTINGS, nullptr, &ScreenHandler.HandleSettings, nullptr),
+  VPHELPER(VP_SETTINGS, nullptr, ScreenHandler.HandleSettings, nullptr),
  #if ENABLED(SINGLE_Z_CALIBRATION)
-    VPHELPER(VP_Z_CALIBRATE, nullptr, &ScreenHandler.HandleZCalibration, nullptr),
+    VPHELPER(VP_Z_CALIBRATE, nullptr, ScreenHandler.HandleZCalibration, nullptr),
  #endif
  #if ENABLED(FIRST_LAYER_CAL)
-    VPHELPER(VP_Z_FIRST_LAYER_CAL, nullptr, &ScreenHandler.HandleFirstLayerCal, nullptr),
+    VPHELPER(VP_Z_FIRST_LAYER_CAL, nullptr, ScreenHandler.HandleFirstLayerCal, nullptr),
  #endif

-  { .VP = VP_MARLIN_VERSION, .memadr = (void*)MarlinVersion, .size = VP_MARLIN_VERSION_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
+  { .VP = VP_MARLIN_VERSION, .memadr = (void*)MarlinVersion, .size = VP_MARLIN_VERSION_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
  // M117 LCD String (We don't need the string in memory but "just" push it to the display on demand, hence the nullptr
-  { .VP = VP_M117, .memadr = nullptr, .size = VP_M117_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplay },
+  { .VP = VP_M117, .memadr = nullptr, .size = VP_M117_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplay },

  // Temperature Data
-  #if HOTENDS >= 1
+  #if HAS_HOTEND
    VPHELPER(VP_T_E0_Is, &thermalManager.temp_hotend[0].celsius, nullptr, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
-    VPHELPER(VP_T_E0_Set, &thermalManager.temp_hotend[0].target, ScreenHandler.HandleTemperatureChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
-    VPHELPER(VP_Flowrate_E0, &planner.flow_percentage[ExtUI::extruder_t::E0], ScreenHandler.HandleFlowRateChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
+    VPHELPER(VP_T_E0_Set, &thermalManager.temp_hotend[0].target, ScreenHandler.HandleTemperatureChanged, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
+    VPHELPER(VP_Flowrate_E0, &planner.flow_percentage[ExtUI::extruder_t::E0], ScreenHandler.HandleFlowRateChanged, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
    VPHELPER(VP_EPos, &destination.e, nullptr, ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<2>),
-    VPHELPER(VP_MOVE_E0, nullptr, &ScreenHandler.HandleManualExtrude, nullptr),
-    VPHELPER(VP_E0_CONTROL, &thermalManager.temp_hotend[0].target, &ScreenHandler.HandleHeaterControl, nullptr),
-    VPHELPER(VP_E0_STATUS, &thermalManager.temp_hotend[0].target, nullptr, &ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay),
+    VPHELPER(VP_MOVE_E0, nullptr, ScreenHandler.HandleManualExtrude, nullptr),
+    VPHELPER(VP_E0_CONTROL, &thermalManager.temp_hotend[0].target, ScreenHandler.HandleHeaterControl, nullptr),
+    VPHELPER(VP_E0_STATUS, &thermalManager.temp_hotend[0].target, nullptr, ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay),
    #if ENABLED(DGUS_PREHEAT_UI)
-      VPHELPER(VP_E0_BED_PREHEAT, nullptr, &ScreenHandler.HandlePreheat, nullptr),
+      VPHELPER(VP_E0_BED_PREHEAT, nullptr, ScreenHandler.HandlePreheat, nullptr),
    #endif
    #if ENABLED(DGUS_FILAMENT_LOADUNLOAD)
-      VPHELPER(VP_E0_FILAMENT_LOAD_UNLOAD, nullptr, &ScreenHandler.HandleFilamentOption, &ScreenHandler.HandleFilamentLoadUnload),
+      VPHELPER(VP_E0_FILAMENT_LOAD_UNLOAD, nullptr, ScreenHandler.HandleFilamentOption, ScreenHandler.HandleFilamentLoadUnload),
    #endif
    #if ENABLED(PIDTEMP)
      VPHELPER(VP_E0_PID_P, &thermalManager.temp_hotend[0].pid.Kp, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID),
      VPHELPER(VP_E0_PID_I, &thermalManager.temp_hotend[0].pid.Ki, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID),
      VPHELPER(VP_E0_PID_D, &thermalManager.temp_hotend[0].pid.Kd, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID),
-      VPHELPER(VP_PID_AUTOTUNE_E0, nullptr, &ScreenHandler.HandlePIDAutotune, nullptr),
+      VPHELPER(VP_PID_AUTOTUNE_E0, nullptr, ScreenHandler.HandlePIDAutotune, nullptr),
    #endif
  #endif
  #if HOTENDS >= 2
    VPHELPER(VP_T_E1_Is, &thermalManager.temp_hotend[1].celsius, nullptr, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
-    VPHELPER(VP_T_E1_Set, &thermalManager.temp_hotend[1].target, ScreenHandler.HandleTemperatureChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
-    VPHELPER(VP_Flowrate_E1, nullptr, ScreenHandler.HandleFlowRateChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
-    VPHELPER(VP_MOVE_E1, nullptr, &ScreenHandler.HandleManualExtrude, nullptr),
-    VPHELPER(VP_E1_CONTROL, &thermalManager.temp_hotend[1].target, &ScreenHandler.HandleHeaterControl, nullptr),
-    VPHELPER(VP_E1_STATUS, &thermalManager.temp_hotend[1].target, nullptr, &ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay),
+    VPHELPER(VP_T_E1_Set, &thermalManager.temp_hotend[1].target, ScreenHandler.HandleTemperatureChanged, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
+    VPHELPER(VP_Flowrate_E1, nullptr, ScreenHandler.HandleFlowRateChanged, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
+    VPHELPER(VP_MOVE_E1, nullptr, ScreenHandler.HandleManualExtrude, nullptr),
+    VPHELPER(VP_E1_CONTROL, &thermalManager.temp_hotend[1].target, ScreenHandler.HandleHeaterControl, nullptr),
+    VPHELPER(VP_E1_STATUS, &thermalManager.temp_hotend[1].target, nullptr, ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay),
  #endif
  #if HAS_HEATED_BED
    VPHELPER(VP_T_Bed_Is, &thermalManager.temp_bed.celsius, nullptr, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
-    VPHELPER(VP_T_Bed_Set, &thermalManager.temp_bed.target, ScreenHandler.HandleTemperatureChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
-    VPHELPER(VP_BED_CONTROL, &thermalManager.temp_bed.target, &ScreenHandler.HandleHeaterControl, nullptr),
-    VPHELPER(VP_BED_STATUS, &thermalManager.temp_bed.target, nullptr, &ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay),
+    VPHELPER(VP_T_Bed_Set, &thermalManager.temp_bed.target, ScreenHandler.HandleTemperatureChanged, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
+    VPHELPER(VP_BED_CONTROL, &thermalManager.temp_bed.target, ScreenHandler.HandleHeaterControl, nullptr),
+    VPHELPER(VP_BED_STATUS, &thermalManager.temp_bed.target, nullptr, ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay),
    #if ENABLED(PIDTEMP)
      VPHELPER(VP_BED_PID_P, &thermalManager.temp_bed.pid.Kp, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID),
      VPHELPER(VP_BED_PID_I, &thermalManager.temp_bed.pid.Ki, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID),
      VPHELPER(VP_BED_PID_D, &thermalManager.temp_bed.pid.Kd, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID),
-      VPHELPER(VP_PID_AUTOTUNE_BED, nullptr, &ScreenHandler.HandlePIDAutotune, nullptr),
+      VPHELPER(VP_PID_AUTOTUNE_BED, nullptr, ScreenHandler.HandlePIDAutotune, nullptr),
    #endif
  #endif

  // Fan Data
  #if HAS_FAN
    #define FAN_VPHELPER(N) \
-      VPHELPER(VP_Fan##N##_Percentage, &thermalManager.fan_speed[N], ScreenHandler.DGUSLCD_PercentageToUint8, &ScreenHandler.DGUSLCD_SendPercentageToDisplay), \
-      VPHELPER(VP_FAN##N##_CONTROL, &thermalManager.fan_speed[N], &ScreenHandler.HandleFanControl, nullptr), \
-      VPHELPER(VP_FAN##N##_STATUS, &thermalManager.fan_speed[N], nullptr, &ScreenHandler.DGUSLCD_SendFanStatusToDisplay),
+      VPHELPER(VP_Fan##N##_Percentage, &thermalManager.fan_speed[N], ScreenHandler.DGUSLCD_PercentageToUint8, ScreenHandler.DGUSLCD_SendPercentageToDisplay), \
+      VPHELPER(VP_FAN##N##_CONTROL, &thermalManager.fan_speed[N], ScreenHandler.HandleFanControl, nullptr), \
+      VPHELPER(VP_FAN##N##_STATUS, &thermalManager.fan_speed[N], nullptr, ScreenHandler.DGUSLCD_SendFanStatusToDisplay),
    REPEAT(FAN_COUNT, FAN_VPHELPER)
  #endif

  // Feedrate
-  VPHELPER(VP_Feedrate_Percentage, &feedrate_percentage, ScreenHandler.DGUSLCD_SetValueDirectly<int16_t>, &ScreenHandler.DGUSLCD_SendWordValueToDisplay ),
+  VPHELPER(VP_Feedrate_Percentage, &feedrate_percentage, ScreenHandler.DGUSLCD_SetValueDirectly<int16_t>, ScreenHandler.DGUSLCD_SendWordValueToDisplay),

  // Position Data
  VPHELPER(VP_XPos, &current_position.x, nullptr, ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<2>),
@@ -429,23 +421,23 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
  VPHELPER(VP_ZPos, &current_position.z, nullptr, ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<2>),

  // Print Progress
-  VPHELPER(VP_PrintProgress_Percentage, nullptr, nullptr, ScreenHandler.DGUSLCD_SendPrintProgressToDisplay ),
+  VPHELPER(VP_PrintProgress_Percentage, nullptr, nullptr, ScreenHandler.DGUSLCD_SendPrintProgressToDisplay),

  // Print Time
-  VPHELPER_STR(VP_PrintTime, nullptr, VP_PrintTime_LEN, nullptr, ScreenHandler.DGUSLCD_SendPrintTimeToDisplay ),
+  VPHELPER_STR(VP_PrintTime, nullptr, VP_PrintTime_LEN, nullptr, ScreenHandler.DGUSLCD_SendPrintTimeToDisplay),
  #if ENABLED(PRINTCOUNTER)
-    VPHELPER_STR(VP_PrintAccTime, nullptr, VP_PrintAccTime_LEN, nullptr, ScreenHandler.DGUSLCD_SendPrintAccTimeToDisplay ),
-    VPHELPER_STR(VP_PrintsTotal, nullptr, VP_PrintsTotal_LEN, nullptr, ScreenHandler.DGUSLCD_SendPrintsTotalToDisplay ),
+    VPHELPER_STR(VP_PrintAccTime, nullptr, VP_PrintAccTime_LEN, nullptr, ScreenHandler.DGUSLCD_SendPrintAccTimeToDisplay),
+    VPHELPER_STR(VP_PrintsTotal, nullptr, VP_PrintsTotal_LEN, nullptr, ScreenHandler.DGUSLCD_SendPrintsTotalToDisplay),
  #endif

  VPHELPER(VP_X_STEP_PER_MM, &planner.settings.axis_steps_per_mm[X_AXIS], ScreenHandler.HandleStepPerMMChanged, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<1>),
  VPHELPER(VP_Y_STEP_PER_MM, &planner.settings.axis_steps_per_mm[Y_AXIS], ScreenHandler.HandleStepPerMMChanged, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<1>),
  VPHELPER(VP_Z_STEP_PER_MM, &planner.settings.axis_steps_per_mm[Z_AXIS], ScreenHandler.HandleStepPerMMChanged, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<1>),
-  #if HOTENDS >= 1
+  #if HAS_HOTEND
    VPHELPER(VP_E0_STEP_PER_MM, &planner.settings.axis_steps_per_mm[E_AXIS_N(0)], ScreenHandler.HandleStepPerMMExtruderChanged, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<1>),
-  #endif
-  #if HOTENDS >= 2
-    VPHELPER(VP_E1_STEP_PER_MM, &planner.settings.axis_steps_per_mm[E_AXIS_N(1)], ScreenHandler.HandleStepPerMMExtruderChanged, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<1>),
+    #if HOTENDS >= 2
+      VPHELPER(VP_E1_STEP_PER_MM, &planner.settings.axis_steps_per_mm[E_AXIS_N(1)], ScreenHandler.HandleStepPerMMExtruderChanged, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<1>),
+    #endif
  #endif

  // SDCard File listing.
@@ -462,7 +454,7 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
    VPHELPER(VP_SD_AbortPrintConfirmed, nullptr, ScreenHandler.DGUSLCD_SD_ReallyAbort, nullptr),
    VPHELPER(VP_SD_Print_Setting, nullptr, ScreenHandler.DGUSLCD_SD_PrintTune, nullptr),
    #if HAS_BED_PROBE
-      VPHELPER(VP_SD_Print_ProbeOffsetZ, &probe.offset.z, ScreenHandler.HandleProbeOffsetZChanged, &ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<2>),
+      VPHELPER(VP_SD_Print_ProbeOffsetZ, &probe.offset.z, ScreenHandler.HandleProbeOffsetZChanged, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<2>),
      #if ENABLED(BABYSTEPPING)
        VPHELPER(VP_SD_Print_LiveAdjustZ, nullptr, ScreenHandler.HandleLiveAdjustZ, nullptr),
      #endif
@@ -474,10 +466,10 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
  #endif

  // Messages for the User, shared by the popup and the kill screen. They cant be autouploaded as we do not buffer content.
-  { .VP = VP_MSGSTR1, .memadr = nullptr, .size = VP_MSGSTR1_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
-  { .VP = VP_MSGSTR2, .memadr = nullptr, .size = VP_MSGSTR2_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
-  { .VP = VP_MSGSTR3, .memadr = nullptr, .size = VP_MSGSTR3_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
-  { .VP = VP_MSGSTR4, .memadr = nullptr, .size = VP_MSGSTR4_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
+  { .VP = VP_MSGSTR1, .memadr = nullptr, .size = VP_MSGSTR1_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
+  { .VP = VP_MSGSTR2, .memadr = nullptr, .size = VP_MSGSTR2_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
+  { .VP = VP_MSGSTR3, .memadr = nullptr, .size = VP_MSGSTR3_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
+  { .VP = VP_MSGSTR4, .memadr = nullptr, .size = VP_MSGSTR4_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplayPGM },

  VPHELPER(0, 0, 0, 0)  // must be last entry.
 };
--- a/Marlin/src/lcd/extui/dgus/hiprecy/DGUSScreenHandler.cpp
+++ b/Marlin/src/lcd/extui/dgus/hiprecy/DGUSScreenHandler.cpp
@@ -249,7 +249,7 @@ void DGUSScreenHandler::HandleManualMove(DGUS_VP_Variable &var, void *val_ptr) {

    switch (var.VP) {
      default: return;
-        #if HOTENDS >= 1
+        #if HAS_HOTEND
          case VP_E0_PID_P: newvalue = value; break;
          case VP_E0_PID_I: newvalue = scalePID_i(value); break;
          case VP_E0_PID_D: newvalue = scalePID_d(value); break;
@@ -329,18 +329,18 @@ void DGUSScreenHandler::HandleManualMove(DGUS_VP_Variable &var, void *val_ptr) {
    }

    if (filament_data.action == 0) { // Go back to utility screen
-      #if HOTENDS >= 1
+      #if HAS_HOTEND
        thermalManager.setTargetHotend(e_temp, ExtUI::extruder_t::E0);
-      #endif
-      #if HOTENDS >= 2
-        thermalManager.setTargetHotend(e_temp, ExtUI::extruder_t::E1);
+        #if HOTENDS >= 2
+          thermalManager.setTargetHotend(e_temp, ExtUI::extruder_t::E1);
+        #endif
      #endif
      GotoScreen(DGUSLCD_SCREEN_UTILITY);
    }
    else { // Go to the preheat screen to show the heating progress
      switch (var.VP) {
        default: return;
-          #if HOTENDS >= 1
+          #if HAS_HOTEND
            case VP_E0_FILAMENT_LOAD_UNLOAD:
              filament_data.extruder = ExtUI::extruder_t::E0;
              thermalManager.setTargetHotend(e_temp, filament_data.extruder);