HAL for DUE architecture

2017-07-19 00:29:06 +01:00
parent 4b16fa3272
commit cfef925559
23 changed files with 2996 additions and 0 deletions
--- a/Marlin/pins_RAMPS_SMART.h
+++ b/Marlin/pins_RAMPS_SMART.h
@@ -0,0 +1,113 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Arduino Due with RAMPS-SMART pin assignments
+ *
+ * Applies to the following boards:
+ *
+ *  RAMPS_SMART_EFB (Hotend, Fan, Bed)
+ *  RAMPS_SMART_EEB (Hotend0, Hotend1, Bed)
+ *  RAMPS_SMART_EFF (Hotend, Fan0, Fan1)
+ *  RAMPS_SMART_EEF (Hotend0, Hotend1, Fan)
+ *  RAMPS_SMART_SF  (Spindle, Controller Fan)
+ *
+ *  Differences between
+ *  RAMPS_14 | RAMPS-SMART
+ *      NONE | D16 (Additional AUX-3 pin(AUX3_2PIN), shares the same pin with AUX4_18PIN)
+ *      NONE | D17 (Additional AUX-3 pin(AUX3_1PIN), shares the same pin with AUX4_17PIN)
+ *        D0 | NONE
+ *        D1 | NONE
+ *    A3/D57 | NONE
+ *    A4/D58 | NONE
+ *    A5/D59 | A3/D57
+ *    A9/D63 | A4/D58
+ *   A10/D64 | A5/D59
+ *   A11/D65 | D66
+ *   A12/D66 | D67
+ *       A13 | A9
+ *       A14 | A10
+ *       A15 | A11
+ */
+
+#ifndef __SAM3X8E__
+  #error "Oops!  Make sure you have 'Arduino Due' selected from the 'Tools -> Boards' menu."
+#endif
+
+#ifndef BOARD_NAME
+  #define BOARD_NAME       "RAMPS-SMART"
+#endif
+
+#define IS_RAMPS_SMART
+#include "pins_RAMPS.h"
+
+//
+// Temperature Sensors
+//
+#undef TEMP_0_PIN
+#define TEMP_0_PIN          9   // Analog Input
+
+#undef TEMP_1_PIN
+#define TEMP_1_PIN         10   // Analog Input
+
+#undef TEMP_BED_PIN
+#define TEMP_BED_PIN       11   // Analog Input
+
+// SPI for Max6675 or Max31855 Thermocouple
+#if DISABLED(SDSUPPORT)
+  #undef MAX6675_SS
+  #define MAX6675_SS       67 // Do not use pin 53 if there is even the remote possibility of using Display/SD card
+#else
+  #undef MAX6675_SS
+  #define MAX6675_SS       67 // Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present
+#endif
+
+//
+// LCD / Controller
+//
+// Support for AZSMZ 12864 LCD with SD Card 3D printer smart controller control panel (not tested)
+#if ENABLED(VIKI2)
+  #undef BEEPER_PIN
+  #define BEEPER_PIN       66
+
+  // Pins for DOGM SPI LCD Support
+  #undef DOGLCD_A0
+  #define DOGLCD_A0        59
+
+  #undef DOGLCD_A0
+  #define DOGLCD_CS        44
+
+  #undef BTN_EN1
+  #define BTN_EN1          58
+
+  #undef BTN_EN2
+  #define BTN_EN2          40
+
+  #undef BTN_ENC
+  #define BTN_ENC          67
+
+  #undef SD_DETECT_PIN
+  #define SD_DETECT_PIN    49 // Pin 49 for display sd interface, 72 for easy adapter board
+
+  #undef KILL_PIN
+  #define KILL_PIN         42
+#endif