HAL for DUE architecture

Marlin/pins_RAMPS_FD.h

@@ -0,0 +1,148 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * RAMPS-FD
+ *
+ * No EEPROM
+ * Use 4k7 thermistor tables
+ */
+
+#ifndef __SAM3X8E__
+  #error "Oops!  Make sure you have 'Arduino Due' selected from the 'Tools -> Boards' menu."
+#endif
+
+#ifndef BOARD_NAME
+  #define BOARD_NAME       "RAMPS-FD"
+#endif
+
+#define INVERTED_HEATER_PINS
+#define INVERTED_BED_PINS
+#define INVERTED_FAN_PINS
+
+//
+// Servos
+//
+#define SERVO0_PIN          7
+#define SERVO1_PIN          6
+#define SERVO2_PIN          5
+#define SERVO3_PIN          3
+
+//
+// Limit Switches
+//
+#define X_MIN_PIN          22
+#define X_MAX_PIN          30
+#define Y_MIN_PIN          24
+#define Y_MAX_PIN          38
+#define Z_MIN_PIN          26
+#define Z_MAX_PIN          34
+
+//
+// Steppers
+//
+#define X_STEP_PIN         63
+#define X_DIR_PIN          62
+#define X_ENABLE_PIN       48
+#define X_CS_PIN           68
+
+#define Y_STEP_PIN         65
+#define Y_DIR_PIN          64
+#define Y_ENABLE_PIN       46
+#define Y_CS_PIN           60
+
+#define Z_STEP_PIN         67
+#define Z_DIR_PIN          66
+#define Z_ENABLE_PIN       44
+#define Z_CS_PIN           58
+
+#define E0_STEP_PIN        36
+#define E0_DIR_PIN         28
+#define E0_ENABLE_PIN      42
+#define E0_CS_PIN          67
+
+#define E1_STEP_PIN        43
+#define E1_DIR_PIN         41
+#define E1_ENABLE_PIN      39
+#define E1_CS_PIN          61
+
+#define E2_STEP_PIN        32
+#define E2_DIR_PIN         47
+#define E2_ENABLE_PIN      45
+#define E2_CS_PIN          59
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN          1   // Analog Input
+#define TEMP_1_PIN          2   // Analog Input
+#define TEMP_2_PIN          3   // Analog Input
+#define TEMP_BED_PIN        0   // Analog Input
+
+// SPI for Max6675 or Max31855 Thermocouple
+#if DISABLED(SDSUPPORT)
+  #define MAX6675_SS            53
+#else
+  #define MAX6675_SS            49
+#endif
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN        9
+#define HEATER_1_PIN       10
+#define HEATER_2_PIN       11
+#define HEATER_BED_PIN      8 // BED
+
+#define FAN_PIN            12
+#define CONTROLLER_FAN_PIN -1
+
+//
+// Misc. Functions
+//
+#define SDSS                4
+#define LED_PIN            13
+
+//
+// LCD / Controller
+//
+#if ENABLED(ULTRA_LCD)
+  #if ENABLED(NEWPANEL)
+    // ramps-fd lcd adaptor
+    #define LCD_PINS_RS         16
+    #define LCD_PINS_ENABLE     17
+    #define LCD_PINS_D4         23
+    #define LCD_PINS_D5         25
+    #define LCD_PINS_D6         27
+    #define LCD_PINS_D7         29
+
+    #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
+      #define BEEPER_PIN        37
+
+      #define BTN_EN1           33
+      #define BTN_EN2           31
+      #define BTN_ENC           35
+
+      #define SD_DETECT_PIN     49
+    #endif
+  #endif
+#endif // ULTRA_LCD