thebears/marlin_skr
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Pulldown pin mode support (#9701)

Browse Source 
Implemented for LPC1768.
This commit is contained in:
Scott Lahteine
2018-02-18 19:26:23 -06:00
committed by GitHub
parent aef9e036bf
commit ca55f2927a
66 changed files with 1182 additions and 325 deletions
Download Patch File Download Diff File Expand all files Collapse all files

49
Marlin/src/HAL/HAL_LPC1768/arduino.cpp
View File

@@ -71,7 +71,7 @@ extern "C" void delay(const int msec) {
// IO functions
// As defined by Arduino INPUT(0x0), OUPUT(0x1), INPUT_PULLUP(0x2)
void pinMode(pin_t pin, uint8_t mode) {
void pinMode(const pin_t pin, const uint8_t mode) {
if (!VALID_PIN(pin)) return;
PINSEL_CFG_Type config = { LPC1768_PIN_PORT(pin),
@@ -79,23 +79,24 @@ void pinMode(pin_t pin, uint8_t mode) {
PINSEL_FUNC_0,
PINSEL_PINMODE_TRISTATE,
PINSEL_PINMODE_NORMAL };
switch(mode) {
case INPUT:
LPC_GPIO(LPC1768_PIN_PORT(pin))->FIODIR &= ~LPC_PIN(LPC1768_PIN_PIN(pin));
PINSEL_ConfigPin(&config);
break;
case OUTPUT:
LPC_GPIO(LPC1768_PIN_PORT(pin))->FIODIR |= LPC_PIN(LPC1768_PIN_PIN(pin));
PINSEL_ConfigPin(&config);
break;
case INPUT_PULLUP:
LPC_GPIO(LPC1768_PIN_PORT(pin))->FIODIR &= ~LPC_PIN(LPC1768_PIN_PIN(pin));
config.Pinmode = PINSEL_PINMODE_PULLUP;
PINSEL_ConfigPin(&config);
break;
default:
break;
switch (mode) {
case INPUT:
LPC_GPIO(LPC1768_PIN_PORT(pin))->FIODIR &= ~LPC_PIN(LPC1768_PIN_PIN(pin));
break;
case OUTPUT:
LPC_GPIO(LPC1768_PIN_PORT(pin))->FIODIR |= LPC_PIN(LPC1768_PIN_PIN(pin));
break;
case INPUT_PULLUP:
LPC_GPIO(LPC1768_PIN_PORT(pin))->FIODIR &= ~LPC_PIN(LPC1768_PIN_PIN(pin));
config.Pinmode = PINSEL_PINMODE_PULLUP;
break;
case INPUT_PULLDOWN:
LPC_GPIO(LPC1768_PIN_PORT(pin))->FIODIR &= ~LPC_PIN(LPC1768_PIN_PIN(pin));
config.Pinmode = PINSEL_PINMODE_PULLDOWN;
break;
default: return;
}
PINSEL_ConfigPin(&config);
}
void digitalWrite(pin_t pin, uint8_t pin_status) {
@@ -108,13 +109,13 @@ void digitalWrite(pin_t pin, uint8_t pin_status) {
pinMode(pin, OUTPUT); // Set pin mode on every write (Arduino version does this)
/**
* Must be done AFTER the output state is set. Doing this before will cause a
* 2uS glitch if writing a "1".
*
* When the Port Direction bit is written to a "1" the output is immediately set
* to the value of the FIOPIN bit which is "0" because of power up defaults.
*/
/**
* Must be done AFTER the output state is set. Doing this before will cause a
* 2uS glitch if writing a "1".
*
* When the Port Direction bit is written to a "1" the output is immediately set
* to the value of the FIOPIN bit which is "0" because of power up defaults.
*/
}
bool digitalRead(pin_t pin) {