thebears/marlin_skr
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

MarlinUI support for up to 5 Material Presets (#18488)

Browse Source 
- Add `I` preset parameter to `G26`, `M106`, `M140`, and `M190`.
- Extend menu items to permit a string interpolation.
- Keep material names in a list and interpolate in menu items.
- Extend material presets to support up to 5 predefined materials.

Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
This commit is contained in:
Giuliano Zaro
2020-07-09 10:11:57 +02:00
committed by GitHub
parent abc5c93986
commit b0c6cfb051
51 changed files with 1179 additions and 870 deletions
Download Patch File Download Diff File Expand all files Collapse all files

76
Marlin/src/gcode/temp/M104_M109.cpp
View File

@@ -50,7 +50,12 @@
#endif
/**
* M104: Set hot end temperature
* M104: Set Hotend Temperature target and return immediately
*
* Parameters:
* I<preset> : Material Preset index (if material presets are defined)
* T<index> : Tool index. If omitted, applies to the active tool
* S<target> : The target temperature in current units
*/
void GcodeSuite::M104() {
@@ -63,8 +68,25 @@ void GcodeSuite::M104() {
if (target_extruder < 0) return;
#endif
if (parser.seenval('S')) {
const int16_t temp = parser.value_celsius();
bool got_temp = false;
int16_t temp = 0;
// Accept 'I' if temperature presets are defined
#if PREHEAT_COUNT
got_temp = parser.seenval('I');
if (got_temp) {
const uint8_t index = parser.value_byte();
temp = ui.material_preset[_MIN(index, PREHEAT_COUNT - 1)].hotend_temp;
}
#endif
// If no 'I' get the temperature from 'S'
if (!got_temp) {
got_temp = parser.seenval('S');
if (got_temp) temp = parser.value_celsius();
}
if (got_temp) {
#if ENABLED(SINGLENOZZLE_STANDBY_TEMP)
singlenozzle_temp[target_extruder] = temp;
if (target_extruder != active_extruder) return;
@@ -91,10 +113,25 @@ void GcodeSuite::M104() {
}
/**
* M109: Sxxx Wait for hotend(s) to reach temperature. Waits only when heating.
* Rxxx Wait for hotend(s) to reach temperature. Waits when heating and cooling.
* M109: Set Hotend Temperature target and wait
*
* With PRINTJOB_TIMER_AUTOSTART also start the job timer on heating and stop it if turned off.
* Parameters
* I<preset> : Material Preset index (if material presets are defined)
* T<index> : Tool index. If omitted, applies to the active tool
* S<target> : The target temperature in current units. Wait for heating only.
* R<target> : The target temperature in current units. Wait for heating and cooling.
*
* With AUTOTEMP...
* F<factor> : Autotemp Scaling Factor. Set non-zero to enable Auto-temp.
* S<min> : Minimum temperature, in current units.
* B<max> : Maximum temperature, in current units.
*
* Examples
* M109 S100 : Set target to 100°. Wait until the hotend is at or above 100°.
* M109 R150 : Set target to 150°. Wait until the hotend gets close to 150°.
*
* With PRINTJOB_TIMER_AUTOSTART turning on heaters will start the print job timer
* (used by printingIsActive, etc.) and turning off heaters will stop the timer.
*/
void GcodeSuite::M109() {
@@ -107,10 +144,27 @@ void GcodeSuite::M109() {
if (target_extruder < 0) return;
#endif
const bool no_wait_for_cooling = parser.seenval('S'),
set_temp = no_wait_for_cooling || parser.seenval('R');
if (set_temp) {
const int16_t temp = parser.value_celsius();
bool got_temp = false;
int16_t temp = 0;
// Accept 'I' if temperature presets are defined
#if PREHEAT_COUNT
got_temp = parser.seenval('I');
if (got_temp) {
const uint8_t index = parser.value_byte();
temp = ui.material_preset[_MIN(index, PREHEAT_COUNT - 1)].hotend_temp;
}
#endif
// Get the temperature from 'S' or 'R'
bool no_wait_for_cooling = false;
if (!got_temp) {
no_wait_for_cooling = parser.seenval('S');
got_temp = no_wait_for_cooling || parser.seenval('R');
if (got_temp) temp = int16_t(parser.value_celsius());
}
if (got_temp) {
#if ENABLED(SINGLENOZZLE_STANDBY_TEMP)
singlenozzle_temp[target_extruder] = temp;
if (target_extruder != active_extruder) return;
@@ -139,7 +193,7 @@ void GcodeSuite::M109() {
TERN_(AUTOTEMP, planner.autotemp_M104_M109());
if (set_temp)
if (got_temp)
(void)thermalManager.wait_for_hotend(target_extruder, no_wait_for_cooling);
}