thebears/marlin_skr
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Update copyright in header, etc. (#14645)

Browse Source
This commit is contained in:
Ludy
2019-07-17 05:42:36 +02:00
committed by Scott Lahteine
parent 5535a047d7
commit abc9b52692
6 changed files with 77 additions and 64 deletions
Download Patch File Download Diff File Expand all files Collapse all files

52
Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h
View File

@@ -121,24 +121,24 @@
* If undefined software serial is used according to the pins below
*/
/**
* Software serial
*/
//
// Software serial
//
// P2_08 E1-Step
// P2_13 E1-Dir
// P2_08 E1-Step
// P2_13 E1-Dir
#define X_SERIAL_TX_PIN P2_13
#define X_SERIAL_RX_PIN P2_13
#define X_SERIAL_TX_PIN P2_13
#define X_SERIAL_RX_PIN P2_13
#define Y_SERIAL_TX_PIN P0_00
#define Y_SERIAL_RX_PIN P0_00
#define Y_SERIAL_TX_PIN P0_00
#define Y_SERIAL_RX_PIN P0_00
#define Z_SERIAL_TX_PIN P0_01
#define Z_SERIAL_RX_PIN P0_01
#define Z_SERIAL_TX_PIN P0_01
#define Z_SERIAL_RX_PIN P0_01
#define E0_SERIAL_TX_PIN P2_08
#define E0_SERIAL_RX_PIN P2_08
#define E0_SERIAL_TX_PIN P2_08
#define E0_SERIAL_RX_PIN P2_08
#endif
@@ -254,9 +254,9 @@
#error "LASER_FEATURE requires 3 free servo pins."
#endif
#endif
#define SPINDLE_LASER_ENA_PIN SERVO1_PIN // (6) Pin should have a pullup/pulldown!
#define SPINDLE_LASER_PWM_PIN SERVO3_PIN // (4) MUST BE HARDWARE PWM
#define SPINDLE_DIR_PIN SERVO2_PIN // (5)
#define SPINDLE_LASER_ENA_PIN SERVO1_PIN // (6) Pin should have a pullup/pulldown!
#define SPINDLE_LASER_PWM_PIN SERVO3_PIN // (4) MUST BE HARDWARE PWM
#define SPINDLE_DIR_PIN SERVO2_PIN // (5)
#endif
//
@@ -309,10 +309,10 @@
#elif HAS_SPI_LCD
//#define SCK_PIN P0_15 // (52) system defined J3-9 & AUX-3
//#define MISO_PIN P0_17 // (50) system defined J3-10 & AUX-3
//#define MOSI_PIN P0_18 // (51) system defined J3-10 & AUX-3
//#define SS_PIN P1_23 // (53) system defined J3-5 & AUX-3 (Sometimes called SDSS)
//#define SCK_PIN P0_15 // (52) system defined J3-9 & AUX-3
//#define MISO_PIN P0_17 // (50) system defined J3-10 & AUX-3
//#define MOSI_PIN P0_18 // (51) system defined J3-10 & AUX-3
//#define SS_PIN P1_23 // (53) system defined J3-5 & AUX-3 (Sometimes called SDSS)
#if ENABLED(FYSETC_MINI_12864)
#define BEEPER_PIN P1_01
@@ -337,10 +337,10 @@
#define SHIFT_LD P1_31 // (49) J3-1 & AUX-3 (NOT 5V tolerant)
#endif
#else
//#define SHIFT_CLK P3_26 // (31) J3-2 & AUX-4
//#define SHIFT_LD P3_25 // (33) J3-4 & AUX-4
//#define SHIFT_OUT P2_11 // (35) J3-3 & AUX-4
//#define SHIFT_EN P1_22 // (41) J5-4 & AUX-4
//#define SHIFT_CLK P3_26 // (31) J3-2 & AUX-4
//#define SHIFT_LD P3_25 // (33) J3-4 & AUX-4
//#define SHIFT_OUT P2_11 // (35) J3-3 & AUX-4
//#define SHIFT_EN P1_22 // (41) J5-4 & AUX-4
#endif
#if ANY(VIKI2, miniVIKI)
@@ -365,7 +365,7 @@
//#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
// results in LCD soft SPI mode 3, SD soft SPI mode 0
#define LCD_RESET_PIN P0_16 // Must be high or open for LCD to operate normally.
#define LCD_RESET_PIN P0_16 // Must be high or open for LCD to operate normally.
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
#ifndef RGB_LED_R_PIN
@@ -378,7 +378,7 @@
#define RGB_LED_B_PIN P1_08
#endif
#elif ENABLED(FYSETC_MINI_12864_2_1)
#define NEOPIXEL_PIN P1_00
#define NEOPIXEL_PIN P1_00
#endif
#else
#define DOGLCD_CS P0_26 // (63) J5-3 & AUX-2