ishan mod
This commit is contained in:
@@ -69,7 +69,7 @@
|
||||
// @section info
|
||||
|
||||
// Author info of this build printed to the host during boot and M115
|
||||
#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.
|
||||
#define STRING_CONFIG_H_AUTHOR "Winslow, of course" // Who made the changes.
|
||||
//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes)
|
||||
|
||||
/**
|
||||
@@ -109,7 +109,7 @@
|
||||
* Currently Ethernet (-2) is only supported on Teensy 4.1 boards.
|
||||
* :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
//#define SERIAL_PORT_2 -1
|
||||
#define SERIAL_PORT_2 -1
|
||||
|
||||
/**
|
||||
* This setting determines the communication speed of the printer.
|
||||
@@ -127,11 +127,11 @@
|
||||
|
||||
// Choose the name from boards.h that matches your setup
|
||||
#ifndef MOTHERBOARD
|
||||
#define MOTHERBOARD BOARD_RAMPS_14_EFB
|
||||
#define MOTHERBOARD BOARD_BTT_SKR_V1_4_TURBO
|
||||
#endif
|
||||
|
||||
// Name displayed in the LCD "Ready" message and Info menu
|
||||
//#define CUSTOM_MACHINE_NAME "3D Printer"
|
||||
#define CUSTOM_MACHINE_NAME "Nugget Printer"
|
||||
|
||||
// Printer's unique ID, used by some programs to differentiate between machines.
|
||||
// Choose your own or use a service like https://www.uuidgenerator.net/version4
|
||||
@@ -317,22 +317,22 @@
|
||||
#if ENABLED(PSU_CONTROL)
|
||||
#define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box
|
||||
|
||||
//#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80
|
||||
//#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80
|
||||
//#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power
|
||||
|
||||
//#define PSU_POWERUP_GCODE "M355 S1" // G-code to run after power-on (e.g., case light on)
|
||||
//#define PSU_POWEROFF_GCODE "M355 S0" // G-code to run before power-off (e.g., case light off)
|
||||
|
||||
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
|
||||
// #define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
|
||||
#if ENABLED(AUTO_POWER_CONTROL)
|
||||
#define AUTO_POWER_FANS // Turn on PSU if fans need power
|
||||
#define AUTO_POWER_E_FANS
|
||||
#define AUTO_POWER_CONTROLLERFAN
|
||||
#define AUTO_POWER_CHAMBER_FAN
|
||||
//#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature
|
||||
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature
|
||||
#define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
|
||||
//#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
|
||||
#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature
|
||||
// #define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature
|
||||
// #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
|
||||
// #define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
|
||||
#endif
|
||||
#endif
|
||||
|
||||
@@ -415,7 +415,7 @@
|
||||
#define TEMP_SENSOR_5 0
|
||||
#define TEMP_SENSOR_6 0
|
||||
#define TEMP_SENSOR_7 0
|
||||
#define TEMP_SENSOR_BED 0
|
||||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
@@ -480,10 +480,11 @@
|
||||
|
||||
// Comment the following line to disable PID and enable bang-bang.
|
||||
#define PIDTEMP
|
||||
#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current
|
||||
#define BANG_MAX 125 // Limits current to nozzle while in bang-bang mode; 255=full current
|
||||
#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current
|
||||
#define PID_K1 0.95 // Smoothing factor within any PID loop
|
||||
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
//#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM)
|
||||
//#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM)
|
||||
@@ -606,8 +607,8 @@
|
||||
*
|
||||
* *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! ***
|
||||
*/
|
||||
#define PREVENT_COLD_EXTRUSION
|
||||
#define EXTRUDE_MINTEMP 170
|
||||
//#define PREVENT_COLD_EXTRUSION
|
||||
//#define EXTRUDE_MINTEMP 170
|
||||
|
||||
/**
|
||||
* Prevent a single extrusion longer than EXTRUDE_MAXLENGTH.
|
||||
@@ -662,28 +663,29 @@
|
||||
// Specify here all the endstop connectors that are connected to any endstop or probe.
|
||||
// Almost all printers will be using one per axis. Probes will use one or more of the
|
||||
// extra connectors. Leave undefined any used for non-endstop and non-probe purposes.
|
||||
#define USE_XMIN_PLUG
|
||||
#define USE_YMIN_PLUG
|
||||
#define USE_ZMIN_PLUG
|
||||
//#define USE_XMAX_PLUG
|
||||
//#define USE_YMAX_PLUG
|
||||
// #define USE_XMIN_PLUG
|
||||
// #define USE_YMIN_PLUG
|
||||
//#define USE_ZMIN_PLUG
|
||||
#define USE_XMAX_PLUG
|
||||
#define USE_YMAX_PLUG
|
||||
//#define USE_ZMAX_PLUG
|
||||
|
||||
// Enable pullup for all endstops to prevent a floating state
|
||||
#define ENDSTOPPULLUPS
|
||||
// #define ENDSTOPPULLUPS
|
||||
#if DISABLED(ENDSTOPPULLUPS)
|
||||
// Disable ENDSTOPPULLUPS to set pullups individually
|
||||
//#define ENDSTOPPULLUP_XMAX
|
||||
//#define ENDSTOPPULLUP_YMAX
|
||||
//#define ENDSTOPPULLUP_ZMAX
|
||||
// #define ENDSTOPPULLUP_ZMAX
|
||||
// #define ENDSTOPPULLUP_YMAX
|
||||
// #define ENDSTOPPULLUP_XMAX
|
||||
// #define ENDSTOPPULLUP_ZMIN
|
||||
//#define ENDSTOPPULLUP_XMIN
|
||||
//#define ENDSTOPPULLUP_YMIN
|
||||
//#define ENDSTOPPULLUP_ZMIN
|
||||
//#define ENDSTOPPULLUP_ZMIN_PROBE
|
||||
|
||||
// #define ENDSTOPPULLUP_ZMIN_PROBE
|
||||
#endif
|
||||
|
||||
// Enable pulldown for all endstops to prevent a floating state
|
||||
//#define ENDSTOPPULLDOWNS
|
||||
#define ENDSTOPPULLDOWNS
|
||||
#if DISABLED(ENDSTOPPULLDOWNS)
|
||||
// Disable ENDSTOPPULLDOWNS to set pulldowns individually
|
||||
//#define ENDSTOPPULLDOWN_XMAX
|
||||
@@ -696,13 +698,13 @@
|
||||
#endif
|
||||
|
||||
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
||||
#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe.
|
||||
// #define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
// #define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
//#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
|
||||
#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
|
||||
#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
|
||||
// #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop//.
|
||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe.
|
||||
|
||||
/**
|
||||
* Stepper Drivers
|
||||
@@ -722,15 +724,15 @@
|
||||
* TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE
|
||||
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE']
|
||||
*/
|
||||
#define X_DRIVER_TYPE A4988
|
||||
#define Y_DRIVER_TYPE A4988
|
||||
#define Z_DRIVER_TYPE A4988
|
||||
#define X_DRIVER_TYPE TMC2130
|
||||
#define Y_DRIVER_TYPE TMC2130
|
||||
#define Z_DRIVER_TYPE TMC2130
|
||||
//#define X2_DRIVER_TYPE A4988
|
||||
//#define Y2_DRIVER_TYPE A4988
|
||||
//#define Z2_DRIVER_TYPE A4988
|
||||
//#define Z3_DRIVER_TYPE A4988
|
||||
//#define Z4_DRIVER_TYPE A4988
|
||||
#define E0_DRIVER_TYPE A4988
|
||||
#define E0_DRIVER_TYPE TMC2130
|
||||
//#define E1_DRIVER_TYPE A4988
|
||||
//#define E2_DRIVER_TYPE A4988
|
||||
//#define E3_DRIVER_TYPE A4988
|
||||
@@ -785,14 +787,14 @@
|
||||
* Override with M92
|
||||
* X, Y, Z, E0 [, E1[, E2...]]
|
||||
*/
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 }
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT { 94.139704, 94.139704, 400.000, 409.0 }
|
||||
|
||||
/**
|
||||
* Default Max Feed Rate (mm/s)
|
||||
* Override with M203
|
||||
* X, Y, Z, E0 [, E1[, E2...]]
|
||||
*/
|
||||
#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 }
|
||||
#define DEFAULT_MAX_FEEDRATE { 300, 300, 100, 100 }
|
||||
|
||||
//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2
|
||||
#if ENABLED(LIMITED_MAX_FR_EDITING)
|
||||
@@ -869,7 +871,7 @@
|
||||
*
|
||||
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
|
||||
*/
|
||||
//#define S_CURVE_ACCELERATION
|
||||
#define S_CURVE_ACCELERATION
|
||||
|
||||
//===========================================================================
|
||||
//============================= Z Probe Options =============================
|
||||
@@ -885,10 +887,10 @@
|
||||
* The probe replaces the Z-MIN endstop and is used for Z homing.
|
||||
* (Automatically enables USE_PROBE_FOR_Z_HOMING.)
|
||||
*/
|
||||
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
|
||||
//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
|
||||
|
||||
// Force the use of the probe for Z-axis homing
|
||||
//#define USE_PROBE_FOR_Z_HOMING
|
||||
#define USE_PROBE_FOR_Z_HOMING
|
||||
|
||||
/**
|
||||
* Z_MIN_PROBE_PIN
|
||||
@@ -943,7 +945,7 @@
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
*/
|
||||
//#define BLTOUCH
|
||||
#define BLTOUCH
|
||||
|
||||
/**
|
||||
* Touch-MI Probe by hotends.fr
|
||||
@@ -1035,7 +1037,7 @@
|
||||
* | [-] |
|
||||
* O-- FRONT --+
|
||||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
#define NOZZLE_TO_PROBE_OFFSET { -22.0, -5.0, -2.85 }
|
||||
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
@@ -1103,8 +1105,8 @@
|
||||
* Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle.
|
||||
* But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle.
|
||||
*/
|
||||
#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow
|
||||
#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points
|
||||
#define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow
|
||||
#define Z_CLEARANCE_BETWEEN_PROBES 4 // Z Clearance between probe points
|
||||
#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
|
||||
//#define Z_AFTER_PROBING 5 // Z position after probing is done
|
||||
|
||||
@@ -1171,13 +1173,13 @@
|
||||
|
||||
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
|
||||
#define INVERT_X_DIR false
|
||||
#define INVERT_Y_DIR true
|
||||
#define INVERT_Y_DIR false
|
||||
#define INVERT_Z_DIR false
|
||||
|
||||
// @section extruder
|
||||
|
||||
// For direct drive extruder v9 set to true, for geared extruder set to false.
|
||||
#define INVERT_E0_DIR false
|
||||
#define INVERT_E0_DIR true
|
||||
#define INVERT_E1_DIR false
|
||||
#define INVERT_E2_DIR false
|
||||
#define INVERT_E3_DIR false
|
||||
@@ -1197,30 +1199,31 @@
|
||||
* - Use a large value (i.e., Z_MAX_POS) if the bed falls down, away from the nozzle.
|
||||
*/
|
||||
//#define Z_IDLE_HEIGHT Z_HOME_POS
|
||||
// #define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
|
||||
|
||||
//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ...
|
||||
#define Z_HOMING_HEIGHT 5 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ...
|
||||
// Be sure to have this much clearance over your Z_MAX_POS to prevent grinding.
|
||||
|
||||
//#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z
|
||||
#define Z_AFTER_HOMING 0 // (mm) Height to move to after homing Z
|
||||
|
||||
// Direction of endstops when homing; 1=MAX, -1=MIN
|
||||
// :[-1,1]
|
||||
#define X_HOME_DIR -1
|
||||
#define Y_HOME_DIR -1
|
||||
#define X_HOME_DIR 1
|
||||
#define Y_HOME_DIR 1
|
||||
#define Z_HOME_DIR -1
|
||||
|
||||
// @section machine
|
||||
|
||||
// The size of the print bed
|
||||
#define X_BED_SIZE 200
|
||||
#define Y_BED_SIZE 200
|
||||
#define X_BED_SIZE 227
|
||||
#define Y_BED_SIZE 148
|
||||
|
||||
// Travel limits (mm) after homing, corresponding to endstop positions.
|
||||
#define X_MIN_POS 0
|
||||
#define Y_MIN_POS 0
|
||||
#define Z_MIN_POS 0
|
||||
#define X_MAX_POS X_BED_SIZE
|
||||
#define Y_MAX_POS Y_BED_SIZE
|
||||
#define X_MAX_POS X_BED_SIZE + 15
|
||||
#define Y_MAX_POS Y_BED_SIZE + 5
|
||||
#define Z_MAX_POS 200
|
||||
|
||||
/**
|
||||
@@ -1237,7 +1240,7 @@
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS)
|
||||
#define MIN_SOFTWARE_ENDSTOP_X
|
||||
#define MIN_SOFTWARE_ENDSTOP_Y
|
||||
#define MIN_SOFTWARE_ENDSTOP_Z
|
||||
// #define MIN_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
// Max software endstops constrain movement within maximum coordinate bounds
|
||||
@@ -1368,7 +1371,7 @@
|
||||
//#define AUTO_BED_LEVELING_3POINT
|
||||
//#define AUTO_BED_LEVELING_LINEAR
|
||||
//#define AUTO_BED_LEVELING_BILINEAR
|
||||
//#define AUTO_BED_LEVELING_UBL
|
||||
#define AUTO_BED_LEVELING_UBL
|
||||
//#define MESH_BED_LEVELING
|
||||
|
||||
/**
|
||||
@@ -1439,7 +1442,7 @@
|
||||
|
||||
// Beyond the probed grid, continue the implied tilt?
|
||||
// Default is to maintain the height of the nearest edge.
|
||||
//#define EXTRAPOLATE_BEYOND_GRID
|
||||
#define EXTRAPOLATE_BEYOND_GRID
|
||||
|
||||
//
|
||||
// Experimental Subdivision of the grid by Catmull-Rom method.
|
||||
@@ -1489,7 +1492,7 @@
|
||||
* Add a bed leveling sub-menu for ABL or MBL.
|
||||
* Include a guided procedure if manual probing is enabled.
|
||||
*/
|
||||
//#define LCD_BED_LEVELING
|
||||
#define LCD_BED_LEVELING
|
||||
|
||||
#if ENABLED(LCD_BED_LEVELING)
|
||||
#define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis.
|
||||
@@ -1558,7 +1561,7 @@
|
||||
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing.
|
||||
// - Prevent Z homing when the Z probe is outside bed area.
|
||||
//
|
||||
//#define Z_SAFE_HOMING
|
||||
#define Z_SAFE_HOMING
|
||||
|
||||
#if ENABLED(Z_SAFE_HOMING)
|
||||
#define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing
|
||||
@@ -1643,7 +1646,7 @@
|
||||
* M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes)
|
||||
* M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.)
|
||||
*/
|
||||
//#define EEPROM_SETTINGS // Persistent storage with M500 and M501
|
||||
#define EEPROM_SETTINGS // Persistent storage with M500 and M501
|
||||
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
|
||||
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
|
||||
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
|
||||
@@ -1699,7 +1702,7 @@
|
||||
* P1 Raise the nozzle always to Z-park height.
|
||||
* P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
|
||||
*/
|
||||
//#define NOZZLE_PARK_FEATURE
|
||||
#define NOZZLE_PARK_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_PARK_FEATURE)
|
||||
// Specify a park position as { X, Y, Z_raise }
|
||||
@@ -1977,7 +1980,7 @@
|
||||
//
|
||||
// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu.
|
||||
//
|
||||
//#define INDIVIDUAL_AXIS_HOMING_MENU
|
||||
#define INDIVIDUAL_AXIS_HOMING_MENU
|
||||
|
||||
//
|
||||
// SPEAKER/BUZZER
|
||||
@@ -2242,7 +2245,7 @@
|
||||
//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default
|
||||
//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on)
|
||||
//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight
|
||||
//#define FYSETC_MINI_12864_2_1 // Type A/B. NeoPixel RGB Backlight
|
||||
#define FYSETC_MINI_12864_2_1 // Type A/B. NeoPixel RGB Backlight
|
||||
//#define FYSETC_GENERIC_12864_1_1 // Larger display with basic ON/OFF backlight.
|
||||
|
||||
//
|
||||
@@ -2625,15 +2628,15 @@
|
||||
#endif
|
||||
|
||||
// Support for Adafruit NeoPixel LED driver
|
||||
//#define NEOPIXEL_LED
|
||||
#define NEOPIXEL_LED
|
||||
#if ENABLED(NEOPIXEL_LED)
|
||||
#define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
|
||||
#define NEOPIXEL_PIN 4 // LED driving pin
|
||||
#define NEOPIXEL_TYPE NEO_GRB // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
|
||||
// #define NEOPIXEL_PIN 4 // LED driving pin
|
||||
//#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
|
||||
//#define NEOPIXEL2_PIN 5
|
||||
#define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.)
|
||||
#define NEOPIXEL_PIXELS 3 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.)
|
||||
#define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
|
||||
#define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255)
|
||||
#define NEOPIXEL_BRIGHTNESS 255 // Initial brightness (0-255)
|
||||
//#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup
|
||||
|
||||
// Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ...
|
||||
@@ -2674,7 +2677,7 @@
|
||||
* Set this manually if there are extra servos needing manual control.
|
||||
* Set to 0 to turn off servo support.
|
||||
*/
|
||||
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command
|
||||
#define NUM_SERVOS 1 // Servo index starts with 0 for M280 command
|
||||
|
||||
// (ms) Delay before the next move will start, to give the servo time to reach its target angle.
|
||||
// 300ms is a good value but you can try less delay.
|
||||
|
||||
Reference in New Issue
Block a user