Standardize Marlin SPI (part 1) (#19989)

2020-11-07 00:07:15 -03:00
parent 97d7af7a23
commit 85d094bbb4
17 changed files with 522 additions and 53 deletions
--- a/Marlin/src/HAL/STM32/MarlinSPI.h
+++ b/Marlin/src/HAL/STM32/MarlinSPI.h
@@ -0,0 +1,107 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#include "HAL.h"
+#include <SPI.h>
+
+extern "C" {
+  #include <utility/spi_com.h>
+}
+
+/**
+ * Marlin currently requires 3 SPI classes:
+ *
+ * SPIClass:
+ *  This class is normally provided by frameworks and has a semi-default interface.
+ *  This is needed because some libraries reference it globally.
+ *
+ * SPISettings:
+ *  Container for SPI configs for SPIClass. As above, libraries may reference it globally.
+ *
+ * These two classes are often provided by frameworks so we cannot extend them to add
+ * useful methods for Marlin.
+ *
+ * MarlinSPI:
+ *  Provides the default SPIClass interface plus some Marlin goodies such as a simplified
+ *  interface for SPI DMA transfer.
+ *
+ */
+
+#define DATA_SIZE_8BIT SPI_DATASIZE_8BIT
+#define DATA_SIZE_16BIT SPI_DATASIZE_16BIT
+
+class MarlinSPI {
+public:
+  MarlinSPI() : MarlinSPI(NC, NC, NC, NC) {}
+
+  MarlinSPI(pin_t mosi, pin_t miso, pin_t sclk, pin_t ssel = (pin_t)NC) : _mosiPin(mosi), _misoPin(miso), _sckPin(sclk), _ssPin(ssel) {
+    _spi.pin_miso = digitalPinToPinName(_misoPin);
+    _spi.pin_mosi = digitalPinToPinName(_mosiPin);
+    _spi.pin_sclk = digitalPinToPinName(_sckPin);
+    _spi.pin_ssel = digitalPinToPinName(_ssPin);
+    _dataSize = DATA_SIZE_8BIT;
+    _bitOrder = MSBFIRST;
+    _dataMode = SPI_MODE_0;
+    _spi.handle.State = HAL_SPI_STATE_RESET;
+    setClockDivider(SPI_SPEED_CLOCK_DIV2_MHZ);
+  }
+
+  void begin(void);
+  void end(void) {}
+
+  byte transfer(uint8_t _data);
+  uint8_t dmaTransfer(const void *transmitBuf, void *receiveBuf, uint16_t length);
+  uint8_t dmaSend(const void * transmitBuf, uint16_t length, bool minc = true);
+
+  /* These methods are deprecated and kept for compatibility.
+   * Use SPISettings with SPI.beginTransaction() to configure SPI parameters.
+   */
+  void setBitOrder(BitOrder _order) { _bitOrder = _order; }
+
+  void setDataMode(uint8_t _mode) {
+    switch (_mode) {
+      case SPI_MODE0: _dataMode = SPI_MODE_0; break;
+      case SPI_MODE1: _dataMode = SPI_MODE_1; break;
+      case SPI_MODE2: _dataMode = SPI_MODE_2; break;
+      case SPI_MODE3: _dataMode = SPI_MODE_3; break;
+    }
+  }
+
+  void setClockDivider(uint8_t _div);
+
+private:
+  void setupDma(SPI_HandleTypeDef &_spiHandle, DMA_HandleTypeDef &_dmaHandle, uint32_t direction, bool minc = false);
+
+  spi_t _spi;
+  DMA_HandleTypeDef _dmaTx;
+  DMA_HandleTypeDef _dmaRx;
+  BitOrder _bitOrder;
+  spi_mode_e _dataMode;
+  uint8_t _clockDivider;
+  uint32_t _speed;
+  uint32_t _dataSize;
+  pin_t _mosiPin;
+  pin_t _misoPin;
+  pin_t _sckPin;
+  pin_t _ssPin;
+};