Y-center GLCD status logo, reorganize (#19954)

Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>

Marlin/src/lcd/dogm/status/chamber.h

@@ -0,0 +1,89 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+//
+// lcd/dogm/status/chamber.h - Status Screen Chamber bitmaps
+//
+
+#define STATUS_CHAMBER_WIDTH 21
+#if STATUS_HEATERS_WIDTH
+  #if ENABLED(STATUS_COMBINE_HEATERS)
+    #define STATUS_CHAMBER_X (LCD_PIXEL_WIDTH - 2 - (STATUS_CHAMBER_BYTEWIDTH) * 8)
+  #elif HAS_FAN0 && HAS_HEATED_BED && HOTENDS <= 2
+    #define STATUS_CHAMBER_X (LCD_PIXEL_WIDTH - 2 - (STATUS_HEATERS_BYTEWIDTH - STATUS_CHAMBER_BYTEWIDTH) * 8)
+  #elif HAS_FAN0 && !HAS_HEATED_BED
+    #define STATUS_CHAMBER_X (LCD_PIXEL_WIDTH - (STATUS_CHAMBER_BYTEWIDTH + STATUS_FAN_BYTEWIDTH) * 8)
+  #else
+    #define STATUS_CHAMBER_X (LCD_PIXEL_WIDTH - (STATUS_CHAMBER_BYTEWIDTH) * 8)
+  #endif
+#endif
+
+#ifdef STATUS_CHAMBER_ANIM
+
+  const unsigned char status_chamber_bmp[] PROGMEM = {
+    B00011111,B11111111,B11111000,
+    B00010000,B00000000,B00001000,
+    B00010000,B00000000,B00001000,
+    B00010000,B00000000,B00001000,
+    B00010000,B00000000,B00001000,
+    B00010000,B00000000,B00001000,
+    B00010000,B00000000,B00001000,
+    B00010000,B00000000,B00001000,
+    B00010000,B00000000,B00001000,
+    B00010000,B00000000,B00001000,
+    B00011111,B11111111,B11111000,
+    B00011111,B11111111,B11111000
+  };
+  const unsigned char status_chamber_on_bmp[] PROGMEM = {
+    B00011111,B11111111,B11111000,
+    B00010000,B00000000,B00001000,
+    B00010000,B10000100,B00001000,
+    B00010000,B01000010,B00001000,
+    B00010000,B01000010,B00001000,
+    B00010000,B10000100,B00001000,
+    B00010001,B00001000,B00001000,
+    B00010001,B00001000,B00001000,
+    B00010000,B10000100,B00001000,
+    B00010000,B00000000,B00001000,
+    B00011111,B11111111,B11111000,
+    B00011111,B11111111,B11111000
+  };
+
+#else
+
+  const unsigned char status_chamber_bmp[] PROGMEM = {
+    B00011111,B11111111,B11111000,
+    B00010000,B00000000,B00001000,
+    B00010000,B10000100,B00001000,
+    B00010000,B01000010,B00001000,
+    B00010000,B01000010,B00001000,
+    B00010000,B10000100,B00001000,
+    B00010001,B00001000,B00001000,
+    B00010001,B00001000,B00001000,
+    B00010000,B10000100,B00001000,
+    B00010000,B00000000,B00001000,
+    B00011111,B11111111,B11111000,
+    B00011111,B11111111,B11111000
+  };
+
+#endif