Catch more LPC1768 pin conflicts (#17019)

Marlin/src/inc/Conditionals_adv.h

@@ -56,11 +56,22 @@
   #undef SHOW_TEMP_ADC_VALUES
 #endif
 
+#if !NUM_SERIAL
+  #undef BAUD_RATE_GCODE
+#endif
+
 // Multiple Z steppers
 #ifndef NUM_Z_STEPPER_DRIVERS
   #define NUM_Z_STEPPER_DRIVERS 1
 #endif
 
+#if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS)
+  #undef Z_STEPPER_ALIGN_AMP
+#endif
+#ifndef Z_STEPPER_ALIGN_AMP
+  #define Z_STEPPER_ALIGN_AMP 1.0
+#endif
+
 #define HAS_CUTTER EITHER(SPINDLE_FEATURE, LASER_FEATURE)
 
 #if !defined(__AVR__) || !defined(USBCON)
@@ -121,9 +132,6 @@
   #define LED_CONTROL_MENU
   #define LED_USER_PRESET_STARTUP
   #define LED_COLOR_PRESETS
-  #ifndef LED_USER_PRESET_RED
-    #define LED_USER_PRESET_RED        255
-  #endif
   #ifndef LED_USER_PRESET_GREEN
     #define LED_USER_PRESET_GREEN      128
   #endif
@@ -135,6 +143,32 @@
   #endif
 #endif
 
+// Set defaults for unspecified LED user colors
+#if ENABLED(LED_CONTROL_MENU)
+  #ifndef LED_USER_PRESET_RED
+    #define LED_USER_PRESET_RED       255
+  #endif
+  #ifndef LED_USER_PRESET_GREEN
+    #define LED_USER_PRESET_GREEN     255
+  #endif
+  #ifndef LED_USER_PRESET_BLUE
+    #define LED_USER_PRESET_BLUE      255
+  #endif
+  #ifndef LED_USER_PRESET_WHITE
+    #define LED_USER_PRESET_WHITE     0
+  #endif
+  #ifndef LED_USER_PRESET_BRIGHTNESS
+    #ifdef NEOPIXEL_BRIGHTNESS
+      #define LED_USER_PRESET_BRIGHTNESS NEOPIXEL_BRIGHTNESS
+    #else
+      #define LED_USER_PRESET_BRIGHTNESS 255
+    #endif
+  #endif
+#endif
+
+// If platform requires early initialization of watchdog to properly boot
+#define EARLY_WATCHDOG (ENABLED(USE_WATCHDOG) && defined(ARDUINO_ARCH_SAM))
+
 // Extensible UI pin mapping for RepRapDiscount
 #define TOUCH_UI_ULTIPANEL ENABLED(TOUCH_UI_FTDI_EVE) && ANY(AO_EXP1_PINMAP, AO_EXP2_PINMAP, CR10_TFT_PINMAP)
 
@@ -143,7 +177,68 @@
   #define POLL_JOG
 #endif
 
-// G60/G61 Position Save
-#if SAVED_POSITIONS > 256
-  #error "SAVED_POSITIONS must be an integer from 0 to 256."
+/**
+ * Driver Timings
+ * NOTE: Driver timing order is longest-to-shortest duration.
+ *       Preserve this ordering when adding new drivers.
+ */
+
+#ifndef MINIMUM_STEPPER_POST_DIR_DELAY
+  #if HAS_DRIVER(TB6560)
+    #define MINIMUM_STEPPER_POST_DIR_DELAY 15000
+  #elif HAS_DRIVER(TB6600)
+    #define MINIMUM_STEPPER_POST_DIR_DELAY 1500
+  #elif HAS_DRIVER(DRV8825)
+    #define MINIMUM_STEPPER_POST_DIR_DELAY 650
+  #elif HAS_DRIVER(LV8729)
+    #define MINIMUM_STEPPER_POST_DIR_DELAY 500
+  #elif HAS_DRIVER(A5984)
+    #define MINIMUM_STEPPER_POST_DIR_DELAY 400
+  #elif HAS_DRIVER(A4988)
+    #define MINIMUM_STEPPER_POST_DIR_DELAY 200
+  #elif HAS_TRINAMIC || HAS_TRINAMIC_STANDALONE
+    #define MINIMUM_STEPPER_POST_DIR_DELAY 20
+  #else
+    #define MINIMUM_STEPPER_POST_DIR_DELAY 0   // Expect at least 10µS since one Stepper ISR must transpire
+  #endif
+#endif
+
+#ifndef MINIMUM_STEPPER_PRE_DIR_DELAY
+  #define MINIMUM_STEPPER_PRE_DIR_DELAY MINIMUM_STEPPER_POST_DIR_DELAY
+#endif
+
+#ifndef MINIMUM_STEPPER_PULSE
+  #if HAS_DRIVER(TB6560)
+    #define MINIMUM_STEPPER_PULSE 30
+  #elif HAS_DRIVER(TB6600)
+    #define MINIMUM_STEPPER_PULSE 3
+  #elif HAS_DRIVER(DRV8825)
+    #define MINIMUM_STEPPER_PULSE 2
+  #elif HAS_DRIVER(A4988) || HAS_DRIVER(A5984)
+    #define MINIMUM_STEPPER_PULSE 1
+  #elif HAS_TRINAMIC || HAS_TRINAMIC_STANDALONE
+    #define MINIMUM_STEPPER_PULSE 0
+  #elif HAS_DRIVER(LV8729)
+    #define MINIMUM_STEPPER_PULSE 0
+  #else
+    #define MINIMUM_STEPPER_PULSE 2
+  #endif
+#endif
+
+#ifndef MAXIMUM_STEPPER_RATE
+  #if HAS_DRIVER(TB6560)
+    #define MAXIMUM_STEPPER_RATE 15000
+  #elif HAS_DRIVER(TB6600)
+    #define MAXIMUM_STEPPER_RATE 150000
+  #elif HAS_DRIVER(DRV8825)
+    #define MAXIMUM_STEPPER_RATE 250000
+  #elif HAS_DRIVER(A4988)
+    #define MAXIMUM_STEPPER_RATE 500000
+  #elif HAS_DRIVER(LV8729)
+    #define MAXIMUM_STEPPER_RATE 1000000
+  #elif HAS_TRINAMIC || HAS_TRINAMIC_STANDALONE
+    #define MAXIMUM_STEPPER_RATE 5000000
+  #else
+    #define MAXIMUM_STEPPER_RATE 250000
+  #endif
 #endif