thebears/marlin_skr
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Apply TERN to compact code (#17619)

Browse Source
This commit is contained in:
Scott Lahteine
2020-04-22 16:35:03 -05:00
committed by GitHub
parent 88bdd26c99
commit 6d90d1e1f5
162 changed files with 1493 additions and 3530 deletions
Download Patch File Download Diff File Expand all files Collapse all files

50
Marlin/src/gcode/calibrate/G425.cpp
View File

@@ -285,37 +285,19 @@ inline void probe_sides(measurements_t &m, const float uncertainty) {
probe_side(m, uncertainty, TOP);
#endif
#if ENABLED(CALIBRATION_MEASURE_RIGHT)
probe_side(m, uncertainty, RIGHT, probe_top_at_edge);
#endif
#if ENABLED(CALIBRATION_MEASURE_FRONT)
probe_side(m, uncertainty, FRONT, probe_top_at_edge);
#endif
#if ENABLED(CALIBRATION_MEASURE_LEFT)
probe_side(m, uncertainty, LEFT, probe_top_at_edge);
#endif
#if ENABLED(CALIBRATION_MEASURE_BACK)
probe_side(m, uncertainty, BACK, probe_top_at_edge);
#endif
TERN_(CALIBRATION_MEASURE_RIGHT, probe_side(m, uncertainty, RIGHT, probe_top_at_edge));
TERN_(CALIBRATION_MEASURE_FRONT, probe_side(m, uncertainty, FRONT, probe_top_at_edge));
TERN_(CALIBRATION_MEASURE_LEFT, probe_side(m, uncertainty, LEFT, probe_top_at_edge));
TERN_(CALIBRATION_MEASURE_BACK, probe_side(m, uncertainty, BACK, probe_top_at_edge));
// Compute the measured center of the calibration object.
#if HAS_X_CENTER
m.obj_center.x = (m.obj_side[LEFT] + m.obj_side[RIGHT]) / 2;
#endif
#if HAS_Y_CENTER
m.obj_center.y = (m.obj_side[FRONT] + m.obj_side[BACK]) / 2;
#endif
TERN_(HAS_X_CENTER, m.obj_center.x = (m.obj_side[LEFT] + m.obj_side[RIGHT]) / 2);
TERN_(HAS_Y_CENTER, m.obj_center.y = (m.obj_side[FRONT] + m.obj_side[BACK]) / 2);
// Compute the outside diameter of the nozzle at the height
// at which it makes contact with the calibration object
#if HAS_X_CENTER
m.nozzle_outer_dimension.x = m.obj_side[RIGHT] - m.obj_side[LEFT] - dimensions.x;
#endif
#if HAS_Y_CENTER
m.nozzle_outer_dimension.y = m.obj_side[BACK] - m.obj_side[FRONT] - dimensions.y;
#endif
TERN_(HAS_X_CENTER, m.nozzle_outer_dimension.x = m.obj_side[RIGHT] - m.obj_side[LEFT] - dimensions.x);
TERN_(HAS_Y_CENTER, m.nozzle_outer_dimension.y = m.obj_side[BACK] - m.obj_side[FRONT] - dimensions.y);
park_above_object(m, uncertainty);
@@ -544,13 +526,9 @@ inline void calibrate_all_toolheads(measurements_t &m, const float uncertainty)
HOTEND_LOOP() calibrate_toolhead(m, uncertainty, e);
#if HAS_HOTEND_OFFSET
normalize_hotend_offsets();
#endif
TERN_(HAS_HOTEND_OFFSET, normalize_hotend_offsets());
#if HAS_MULTI_HOTEND
set_nozzle(m, 0);
#endif
TERN_(HAS_MULTI_HOTEND, set_nozzle(m, 0));
}
/**
@@ -567,9 +545,7 @@ inline void calibrate_all_toolheads(measurements_t &m, const float uncertainty)
inline void calibrate_all() {
measurements_t m;
#if HAS_HOTEND_OFFSET
reset_hotend_offsets();
#endif
TERN_(HAS_HOTEND_OFFSET, reset_hotend_offsets());
TEMPORARY_BACKLASH_CORRECTION(all_on);
TEMPORARY_BACKLASH_SMOOTHING(0.0f);
@@ -577,9 +553,7 @@ inline void calibrate_all() {
// Do a fast and rough calibration of the toolheads
calibrate_all_toolheads(m, CALIBRATION_MEASUREMENT_UNKNOWN);
#if ENABLED(BACKLASH_GCODE)
calibrate_backlash(m, CALIBRATION_MEASUREMENT_UNCERTAIN);
#endif
TERN_(BACKLASH_GCODE, calibrate_backlash(m, CALIBRATION_MEASUREMENT_UNCERTAIN));
// Cycle the toolheads so the servos settle into their "natural" positions
#if HAS_MULTI_HOTEND