Multi-language support (#15453)
This commit is contained in:
Marcio Teixeira
committed by
Scott Lahteine
Scott Lahteine
parent
dc14d4a13c
commit
6a865a6146
@@ -28,357 +28,463 @@
|
||||
* See also http://marlinfw.org/docs/development/lcd_language.html
|
||||
*
|
||||
*/
|
||||
namespace Language_zh_CN {
|
||||
using namespace Language_en; // Inherit undefined strings from English
|
||||
|
||||
#define CHARSIZE 3
|
||||
constexpr uint8_t CHARSIZE = 3;
|
||||
PROGMEM Language_Str LANGUAGE = _UxGT("Simplified Chinese");
|
||||
|
||||
#define WELCOME_MSG MACHINE_NAME _UxGT("已就绪.") //" ready."
|
||||
#define MSG_BACK _UxGT("返回") // ”Back“
|
||||
#define MSG_MEDIA_INSERTED _UxGT("存储卡已插入") //"Card inserted"
|
||||
#define MSG_MEDIA_REMOVED _UxGT("存储卡被拔出") //"Card removed"
|
||||
#define MSG_LCD_ENDSTOPS _UxGT("挡块") //"Endstops" // Max length 8 characters
|
||||
#define MSG_MAIN _UxGT("主菜单") //"Main"
|
||||
#define MSG_AUTOSTART _UxGT("自动开始") //"Autostart"
|
||||
#define MSG_DISABLE_STEPPERS _UxGT("关闭步进电机") //"Disable steppers"
|
||||
#define MSG_DEBUG_MENU _UxGT("调试菜单") // "Debug Menu"
|
||||
#define MSG_PROGRESS_BAR_TEST _UxGT("进度条测试") // "Progress Bar Test"
|
||||
#define MSG_AUTO_HOME _UxGT("回原点") //"Auto home"
|
||||
#define MSG_AUTO_HOME_X _UxGT("回X原位") //"Home X"
|
||||
#define MSG_AUTO_HOME_Y _UxGT("回Y原位") //"Home Y"
|
||||
#define MSG_AUTO_HOME_Z _UxGT("回Z原位") //"Home Z"
|
||||
#define MSG_LEVEL_BED_HOMING _UxGT("平台调平XYZ归原位") //"Homing XYZ"
|
||||
#define MSG_LEVEL_BED_WAITING _UxGT("单击开始热床调平") //"Click to Begin"
|
||||
#define MSG_LEVEL_BED_NEXT_POINT _UxGT("下个热床调平点") //"Next Point"
|
||||
#define MSG_LEVEL_BED_DONE _UxGT("完成热床调平") //"Leveling Done!"
|
||||
#define MSG_Z_FADE_HEIGHT _UxGT("淡出高度") // "Fade Height"
|
||||
#define MSG_SET_HOME_OFFSETS _UxGT("设置原点偏移") //"Set home offsets"
|
||||
#define MSG_HOME_OFFSETS_APPLIED _UxGT("偏移已启用") //"Offsets applied"
|
||||
#define MSG_SET_ORIGIN _UxGT("设置原点") //"Set origin"
|
||||
#define MSG_PREHEAT_1 _UxGT("预热" PREHEAT_1_LABEL) //"Preheat PREHEAT_2_LABEL"
|
||||
#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ") //MSG_PREHEAT_1 " "
|
||||
#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" 全部") //MSG_PREHEAT_1 " All"
|
||||
#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" 热床") //MSG_PREHEAT_1 " Bed"
|
||||
#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" 设置") //MSG_PREHEAT_1 " conf"
|
||||
#define MSG_PREHEAT_2 _UxGT("预热" PREHEAT_2_LABEL) //"Preheat PREHEAT_2_LABEL"
|
||||
#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ") //MSG_PREHEAT_2 " "
|
||||
#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" 全部") //MSG_PREHEAT_2 " All"
|
||||
#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 _UxGT(" 热床") //MSG_PREHEAT_2 " Bed"
|
||||
#define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 _UxGT(" 设置") //MSG_PREHEAT_2 " conf"
|
||||
#define MSG_COOLDOWN _UxGT("降温") //"Cooldown"
|
||||
#define MSG_SWITCH_PS_ON _UxGT("电源打开") //"Switch power on"
|
||||
#define MSG_SWITCH_PS_OFF _UxGT("电源关闭") //"Switch power off"
|
||||
#define MSG_EXTRUDE _UxGT("挤出") //"Extrude"
|
||||
#define MSG_RETRACT _UxGT("回抽") //"Retract"
|
||||
#define MSG_MOVE_AXIS _UxGT("移动轴") //"Move axis"
|
||||
#define MSG_BED_LEVELING _UxGT("调平热床") //"Bed leveling"
|
||||
#define MSG_LEVEL_BED _UxGT("调平热床") //"Level bed"
|
||||
#define MSG_LEVEL_CORNERS _UxGT("调平边角") // "Level corners"
|
||||
PROGMEM Language_Str WELCOME_MSG = MACHINE_NAME _UxGT("已就绪."); //" ready."
|
||||
PROGMEM Language_Str MSG_BACK = _UxGT("返回"); // ”Back“
|
||||
PROGMEM Language_Str MSG_MEDIA_INSERTED = _UxGT("存储卡已插入"); //"Card inserted"
|
||||
PROGMEM Language_Str MSG_MEDIA_REMOVED = _UxGT("存储卡被拔出"); //"Card removed"
|
||||
PROGMEM Language_Str MSG_LCD_ENDSTOPS = _UxGT("挡块"); //"Endstops" // Max length 8 characters
|
||||
PROGMEM Language_Str MSG_MAIN = _UxGT("主菜单"); //"Main"
|
||||
PROGMEM Language_Str MSG_AUTOSTART = _UxGT("自动开始"); //"Autostart"
|
||||
PROGMEM Language_Str MSG_DISABLE_STEPPERS = _UxGT("关闭步进电机"); //"Disable steppers"
|
||||
PROGMEM Language_Str MSG_DEBUG_MENU = _UxGT("调试菜单"); // "Debug Menu"
|
||||
PROGMEM Language_Str MSG_PROGRESS_BAR_TEST = _UxGT("进度条测试"); // "Progress Bar Test"
|
||||
PROGMEM Language_Str MSG_AUTO_HOME = _UxGT("回原点"); //"Auto home"
|
||||
PROGMEM Language_Str MSG_AUTO_HOME_X = _UxGT("回X原位"); //"Home X"
|
||||
PROGMEM Language_Str MSG_AUTO_HOME_Y = _UxGT("回Y原位"); //"Home Y"
|
||||
PROGMEM Language_Str MSG_AUTO_HOME_Z = _UxGT("回Z原位"); //"Home Z"
|
||||
PROGMEM Language_Str MSG_LEVEL_BED_HOMING = _UxGT("平台调平XYZ归原位"); //"Homing XYZ"
|
||||
PROGMEM Language_Str MSG_LEVEL_BED_WAITING = _UxGT("单击开始热床调平"); //"Click to Begin"
|
||||
PROGMEM Language_Str MSG_LEVEL_BED_NEXT_POINT = _UxGT("下个热床调平点"); //"Next Point"
|
||||
PROGMEM Language_Str MSG_LEVEL_BED_DONE = _UxGT("完成热床调平"); //"Leveling Done!"
|
||||
PROGMEM Language_Str MSG_Z_FADE_HEIGHT = _UxGT("淡出高度"); // "Fade Height"
|
||||
PROGMEM Language_Str MSG_SET_HOME_OFFSETS = _UxGT("设置原点偏移"); //"Set home offsets"
|
||||
PROGMEM Language_Str MSG_HOME_OFFSETS_APPLIED = _UxGT("偏移已启用"); //"Offsets applied"
|
||||
PROGMEM Language_Str MSG_SET_ORIGIN = _UxGT("设置原点"); //"Set origin"
|
||||
PROGMEM Language_Str MSG_PREHEAT_1 = _UxGT("预热 ") PREHEAT_1_LABEL; //"Preheat PREHEAT_2_LABEL"
|
||||
PROGMEM Language_Str MSG_PREHEAT_1_H0 = _UxGT("预热 ") PREHEAT_1_LABEL " " LCD_STR_N0; //"Preheat PREHEAT_2_LABEL"
|
||||
PROGMEM Language_Str MSG_PREHEAT_1_H1 = _UxGT("预热 ") PREHEAT_1_LABEL " " LCD_STR_N1; //"Preheat PREHEAT_2_LABEL"
|
||||
PROGMEM Language_Str MSG_PREHEAT_1_H2 = _UxGT("预热 ") PREHEAT_1_LABEL " " LCD_STR_N2; //"Preheat PREHEAT_2_LABEL"
|
||||
PROGMEM Language_Str MSG_PREHEAT_1_H3 = _UxGT("预热 ") PREHEAT_1_LABEL " " LCD_STR_N3; //"Preheat PREHEAT_2_LABEL"
|
||||
PROGMEM Language_Str MSG_PREHEAT_1_H4 = _UxGT("预热 ") PREHEAT_1_LABEL " " LCD_STR_N4; //"Preheat PREHEAT_2_LABEL"
|
||||
PROGMEM Language_Str MSG_PREHEAT_1_H5 = _UxGT("预热 ") PREHEAT_1_LABEL " " LCD_STR_N5; //"Preheat PREHEAT_2_LABEL"
|
||||
PROGMEM Language_Str MSG_PREHEAT_1_END = _UxGT("预热 ") PREHEAT_1_LABEL _UxGT(" 喷嘴"); //MSG_PREHEAT_1 " "
|
||||
PROGMEM Language_Str MSG_PREHEAT_1_END_E0 = _UxGT("预热 ") PREHEAT_1_LABEL _UxGT(" 喷嘴 ") LCD_STR_N0; //MSG_PREHEAT_1 " "
|
||||
PROGMEM Language_Str MSG_PREHEAT_1_END_E1 = _UxGT("预热 ") PREHEAT_1_LABEL _UxGT(" 喷嘴 ") LCD_STR_N1; //MSG_PREHEAT_1 " "
|
||||
PROGMEM Language_Str MSG_PREHEAT_1_END_E2 = _UxGT("预热 ") PREHEAT_1_LABEL _UxGT(" 喷嘴 ") LCD_STR_N2; //MSG_PREHEAT_1 " "
|
||||
PROGMEM Language_Str MSG_PREHEAT_1_END_E3 = _UxGT("预热 ") PREHEAT_1_LABEL _UxGT(" 喷嘴 ") LCD_STR_N3; //MSG_PREHEAT_1 " "
|
||||
PROGMEM Language_Str MSG_PREHEAT_1_END_E4 = _UxGT("预热 ") PREHEAT_1_LABEL _UxGT(" 喷嘴 ") LCD_STR_N4; //MSG_PREHEAT_1 " "
|
||||
PROGMEM Language_Str MSG_PREHEAT_1_END_E5 = _UxGT("预热 ") PREHEAT_1_LABEL _UxGT(" 喷嘴 ") LCD_STR_N5; //MSG_PREHEAT_1 " "
|
||||
PROGMEM Language_Str MSG_PREHEAT_1_ALL = _UxGT("预热 ") PREHEAT_1_LABEL _UxGT(" 全部"); //MSG_PREHEAT_1 " All"
|
||||
PROGMEM Language_Str MSG_PREHEAT_1_BEDONLY = _UxGT("预热 ") PREHEAT_1_LABEL _UxGT(" 热床"); //MSG_PREHEAT_1 " Bed"
|
||||
PROGMEM Language_Str MSG_PREHEAT_1_SETTINGS = _UxGT("预热 ") PREHEAT_1_LABEL _UxGT(" 设置"); //MSG_PREHEAT_1 " conf"
|
||||
PROGMEM Language_Str MSG_PREHEAT_2 = _UxGT("预热 ") PREHEAT_2_LABEL; //"Preheat PREHEAT_2_LABEL"
|
||||
PROGMEM Language_Str MSG_PREHEAT_2_H0 = _UxGT("预热 ") PREHEAT_2_LABEL " " LCD_STR_N0; //"Preheat PREHEAT_2_LABEL"
|
||||
PROGMEM Language_Str MSG_PREHEAT_2_H1 = _UxGT("预热 ") PREHEAT_2_LABEL " " LCD_STR_N1; //"Preheat PREHEAT_2_LABEL"
|
||||
PROGMEM Language_Str MSG_PREHEAT_2_H2 = _UxGT("预热 ") PREHEAT_2_LABEL " " LCD_STR_N2; //"Preheat PREHEAT_2_LABEL"
|
||||
PROGMEM Language_Str MSG_PREHEAT_2_H3 = _UxGT("预热 ") PREHEAT_2_LABEL " " LCD_STR_N3; //"Preheat PREHEAT_2_LABEL"
|
||||
PROGMEM Language_Str MSG_PREHEAT_2_H4 = _UxGT("预热 ") PREHEAT_2_LABEL " " LCD_STR_N4; //"Preheat PREHEAT_2_LABEL"
|
||||
PROGMEM Language_Str MSG_PREHEAT_2_H5 = _UxGT("预热 ") PREHEAT_2_LABEL " " LCD_STR_N5; //"Preheat PREHEAT_2_LABEL"
|
||||
PROGMEM Language_Str MSG_PREHEAT_2_END = _UxGT("预热 ") PREHEAT_2_LABEL _UxGT(" 喷嘴"); //MSG_PREHEAT_2 " "
|
||||
PROGMEM Language_Str MSG_PREHEAT_2_END_E0 = _UxGT("预热 ") PREHEAT_2_LABEL _UxGT(" 喷嘴 ") LCD_STR_N0; //MSG_PREHEAT_2 " "
|
||||
PROGMEM Language_Str MSG_PREHEAT_2_END_E1 = _UxGT("预热 ") PREHEAT_2_LABEL _UxGT(" 喷嘴 ") LCD_STR_N1; //MSG_PREHEAT_2 " "
|
||||
PROGMEM Language_Str MSG_PREHEAT_2_END_E2 = _UxGT("预热 ") PREHEAT_2_LABEL _UxGT(" 喷嘴 ") LCD_STR_N2; //MSG_PREHEAT_2 " "
|
||||
PROGMEM Language_Str MSG_PREHEAT_2_END_E3 = _UxGT("预热 ") PREHEAT_2_LABEL _UxGT(" 喷嘴 ") LCD_STR_N3; //MSG_PREHEAT_2 " "
|
||||
PROGMEM Language_Str MSG_PREHEAT_2_END_E4 = _UxGT("预热 ") PREHEAT_2_LABEL _UxGT(" 喷嘴 ") LCD_STR_N4; //MSG_PREHEAT_2 " "
|
||||
PROGMEM Language_Str MSG_PREHEAT_2_END_E5 = _UxGT("预热 ") PREHEAT_2_LABEL _UxGT(" 喷嘴 ") LCD_STR_N5; //MSG_PREHEAT_2 " "
|
||||
PROGMEM Language_Str MSG_PREHEAT_2_ALL = _UxGT("预热 ") PREHEAT_2_LABEL _UxGT(" 全部"); //MSG_PREHEAT_2 " All"
|
||||
PROGMEM Language_Str MSG_PREHEAT_2_BEDONLY = _UxGT("预热 ") PREHEAT_2_LABEL _UxGT(" 热床"); //MSG_PREHEAT_2 " Bed"
|
||||
PROGMEM Language_Str MSG_PREHEAT_2_SETTINGS = _UxGT("预热 ") PREHEAT_2_LABEL _UxGT(" 设置"); //MSG_PREHEAT_2 " conf"
|
||||
PROGMEM Language_Str MSG_COOLDOWN = _UxGT("降温"); //"Cooldown"
|
||||
PROGMEM Language_Str MSG_SWITCH_PS_ON = _UxGT("电源打开"); //"Switch power on"
|
||||
PROGMEM Language_Str MSG_SWITCH_PS_OFF = _UxGT("电源关闭"); //"Switch power off"
|
||||
PROGMEM Language_Str MSG_EXTRUDE = _UxGT("挤出"); //"Extrude"
|
||||
PROGMEM Language_Str MSG_RETRACT = _UxGT("回抽"); //"Retract"
|
||||
PROGMEM Language_Str MSG_MOVE_AXIS = _UxGT("移动轴"); //"Move axis"
|
||||
PROGMEM Language_Str MSG_BED_LEVELING = _UxGT("调平热床"); //"Bed leveling"
|
||||
PROGMEM Language_Str MSG_LEVEL_BED = _UxGT("调平热床"); //"Level bed"
|
||||
PROGMEM Language_Str MSG_LEVEL_CORNERS = _UxGT("调平边角"); // "Level corners"
|
||||
|
||||
#define MSG_NEXT_CORNER _UxGT("下个边角") // "Next corner"
|
||||
#define MSG_EDIT_MESH _UxGT("编辑网格") // "Edit Mesh"
|
||||
#define MSG_EDITING_STOPPED _UxGT("网格编辑已停止") // "Mesh Editing Stopped"
|
||||
#define MSG_USER_MENU _UxGT("定制命令") // "Custom Commands"
|
||||
PROGMEM Language_Str MSG_NEXT_CORNER = _UxGT("下个边角"); // "Next corner"
|
||||
PROGMEM Language_Str MSG_EDIT_MESH = _UxGT("编辑网格"); // "Edit Mesh"
|
||||
PROGMEM Language_Str MSG_EDITING_STOPPED = _UxGT("网格编辑已停止"); // "Mesh Editing Stopped"
|
||||
PROGMEM Language_Str MSG_USER_MENU = _UxGT("定制命令"); // "Custom Commands"
|
||||
|
||||
#define MSG_UBL_DOING_G29 _UxGT("执行G29") // "Doing G29"
|
||||
#define MSG_UBL_TOOLS _UxGT("UBL工具") // "UBL Tools"
|
||||
#define MSG_UBL_LEVEL_BED _UxGT("统一热床调平(UBL)") // "Unified Bed Leveling"
|
||||
#define MSG_UBL_MANUAL_MESH _UxGT("手工创设网格") // "Manually Build Mesh"
|
||||
#define MSG_UBL_BC_INSERT _UxGT("放置垫片并测量") // "Place shim & measure"
|
||||
#define MSG_UBL_BC_INSERT2 _UxGT("测量") // "Measure"
|
||||
#define MSG_UBL_BC_REMOVE _UxGT("移除并测量热床") // "Remove & measure bed"
|
||||
#define MSG_UBL_MOVING_TO_NEXT _UxGT("移动到下一个") // "Moving to next"
|
||||
#define MSG_UBL_ACTIVATE_MESH _UxGT("激活UBL") // "Activate UBL"
|
||||
#define MSG_UBL_DEACTIVATE_MESH _UxGT("关闭UBL") // "Deactivate UBL"
|
||||
#define MSG_UBL_SET_TEMP_BED _UxGT("设置热床温度") // "Bed Temp"
|
||||
#define MSG_UBL_SET_TEMP_HOTEND _UxGT("热端温度") // "Hotend Temp"
|
||||
#define MSG_UBL_MESH_EDIT _UxGT("网格编辑") // "Mesh Edit"
|
||||
#define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("编辑客户网格") // "Edit Custom Mesh"
|
||||
#define MSG_UBL_FINE_TUNE_MESH _UxGT("细调网格") // "Fine Tuning Mesh"
|
||||
#define MSG_UBL_DONE_EDITING_MESH _UxGT("完成编辑网格") // "Done Editing Mesh"
|
||||
#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("创设客户网格") // "Build Custom Mesh"
|
||||
#define MSG_UBL_BUILD_MESH_MENU _UxGT("创设网格") // "Build Mesh"
|
||||
#define MSG_UBL_BUILD_MESH_M1 _UxGT("创设" PREHEAT_1_LABEL "网格") // "Build PREHEAT_1_LABEL Mesh"
|
||||
#define MSG_UBL_BUILD_MESH_M2 _UxGT("创设" PREHEAT_2_LABEL "网格") // "Build PREHEAT_2_LABEL Mesh"
|
||||
#define MSG_UBL_BUILD_COLD_MESH _UxGT("创设冷网格") // "Build Cold Mesh"
|
||||
#define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("调整网格高度") // "Adjust Mesh Height"
|
||||
#define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("高度合计") // "Height Amount"
|
||||
#define MSG_UBL_VALIDATE_MESH_MENU _UxGT("批准网格") // "Validate Mesh"
|
||||
#define MSG_UBL_VALIDATE_MESH_M1 _UxGT("批准" PREHEAT_1_LABEL "网格") // "Validate PREHEAT_1_LABEL Mesh"
|
||||
#define MSG_UBL_VALIDATE_MESH_M2 _UxGT("批准" PREHEAT_2_LABEL "网格") // "Validate PREHEAT_2_LABEL Mesh"
|
||||
#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("批准客户网格") // "Validate Custom Mesh"
|
||||
#define MSG_UBL_CONTINUE_MESH _UxGT("继续热床网格") // "Continue Bed Mesh"
|
||||
#define MSG_UBL_MESH_LEVELING _UxGT("网格调平") // "Mesh Leveling"
|
||||
#define MSG_UBL_3POINT_MESH_LEVELING _UxGT("三点调平") // "3-Point Leveling"
|
||||
#define MSG_UBL_GRID_MESH_LEVELING _UxGT("格子网格调平") // "Grid Mesh Leveling"
|
||||
#define MSG_UBL_MESH_LEVEL _UxGT("调平网格") // "Level Mesh"
|
||||
#define MSG_UBL_SIDE_POINTS _UxGT("边点") // "Side Points"
|
||||
#define MSG_UBL_MAP_TYPE _UxGT("图类型") // "Map Type"
|
||||
#define MSG_UBL_OUTPUT_MAP _UxGT("输出网格图") // "Output Mesh Map"
|
||||
#define MSG_UBL_OUTPUT_MAP_HOST _UxGT("输出到主机") // "Output for Host"
|
||||
#define MSG_UBL_OUTPUT_MAP_CSV _UxGT("输出到CSV") // "Output for CSV"
|
||||
#define MSG_UBL_OUTPUT_MAP_BACKUP _UxGT("输出到备份") // "Off Printer Backup"
|
||||
#define MSG_UBL_INFO_UBL _UxGT("输出UBL信息") // "Output UBL Info"
|
||||
#define MSG_UBL_FILLIN_AMOUNT _UxGT("填充合计") // "Fill-in Amount"
|
||||
#define MSG_UBL_MANUAL_FILLIN _UxGT("手工填充") // "Manual Fill-in"
|
||||
#define MSG_UBL_SMART_FILLIN _UxGT("聪明填充") // "Smart Fill-in"
|
||||
#define MSG_UBL_FILLIN_MESH _UxGT("填充网格") // "Fill-in Mesh"
|
||||
#define MSG_UBL_INVALIDATE_ALL _UxGT("作废所有的") // "Invalidate All"
|
||||
#define MSG_UBL_INVALIDATE_CLOSEST _UxGT("作废最近的") // "Invalidate Closest"
|
||||
#define MSG_UBL_FINE_TUNE_ALL _UxGT("细调所有的") // "Fine Tune All"
|
||||
#define MSG_UBL_FINE_TUNE_CLOSEST _UxGT("细调最近的") // "Fine Tune Closest"
|
||||
#define MSG_UBL_STORAGE_MESH_MENU _UxGT("网格存储") // "Mesh Storage"
|
||||
#define MSG_UBL_STORAGE_SLOT _UxGT("存储槽") // "Memory Slot"
|
||||
#define MSG_UBL_LOAD_MESH _UxGT("装载热床网格") // "Load Bed Mesh"
|
||||
#define MSG_UBL_SAVE_MESH _UxGT("保存热床网格") // "Save Bed Mesh"
|
||||
#define MSG_MESH_LOADED _UxGT("网格 %i 已装载") // "Mesh %i loaded"
|
||||
#define MSG_MESH_SAVED _UxGT("网格 %i 已保存") // "Mesh %i saved"
|
||||
#define MSG_UBL_NO_STORAGE _UxGT("没有存储") // "No storage"
|
||||
#define MSG_UBL_SAVE_ERROR _UxGT("错误: UBL保存") // "Err: UBL Save"
|
||||
#define MSG_UBL_RESTORE_ERROR _UxGT("错误: UBL还原") // "Err: UBL Restore"
|
||||
#define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Z偏移已停止") // "Z-Offset Stopped"
|
||||
#define MSG_UBL_STEP_BY_STEP_MENU _UxGT("一步步UBL") // "Step-By-Step UBL"
|
||||
PROGMEM Language_Str MSG_UBL_DOING_G29 = _UxGT("执行G29"); // "Doing G29"
|
||||
PROGMEM Language_Str MSG_UBL_TOOLS = _UxGT("UBL工具"); // "UBL Tools"
|
||||
PROGMEM Language_Str MSG_UBL_LEVEL_BED = _UxGT("统一热床调平(UBL)"); // "Unified Bed Leveling"
|
||||
PROGMEM Language_Str MSG_UBL_MANUAL_MESH = _UxGT("手工创设网格"); // "Manually Build Mesh"
|
||||
PROGMEM Language_Str MSG_UBL_BC_INSERT = _UxGT("放置垫片并测量"); // "Place shim & measure"
|
||||
PROGMEM Language_Str MSG_UBL_BC_INSERT2 = _UxGT("测量"); // "Measure"
|
||||
PROGMEM Language_Str MSG_UBL_BC_REMOVE = _UxGT("移除并测量热床"); // "Remove & measure bed"
|
||||
PROGMEM Language_Str MSG_UBL_MOVING_TO_NEXT = _UxGT("移动到下一个"); // "Moving to next"
|
||||
PROGMEM Language_Str MSG_UBL_ACTIVATE_MESH = _UxGT("激活UBL"); // "Activate UBL"
|
||||
PROGMEM Language_Str MSG_UBL_DEACTIVATE_MESH = _UxGT("关闭UBL"); // "Deactivate UBL"
|
||||
PROGMEM Language_Str MSG_UBL_SET_TEMP_BED = _UxGT("设置热床温度"); // "Bed Temp"
|
||||
PROGMEM Language_Str MSG_UBL_SET_TEMP_HOTEND = _UxGT("热端温度"); // "Hotend Temp"
|
||||
PROGMEM Language_Str MSG_UBL_MESH_EDIT = _UxGT("网格编辑"); // "Mesh Edit"
|
||||
PROGMEM Language_Str MSG_UBL_EDIT_CUSTOM_MESH = _UxGT("编辑客户网格"); // "Edit Custom Mesh"
|
||||
PROGMEM Language_Str MSG_UBL_FINE_TUNE_MESH = _UxGT("细调网格"); // "Fine Tuning Mesh"
|
||||
PROGMEM Language_Str MSG_UBL_DONE_EDITING_MESH = _UxGT("完成编辑网格"); // "Done Editing Mesh"
|
||||
PROGMEM Language_Str MSG_UBL_BUILD_CUSTOM_MESH = _UxGT("创设客户网格"); // "Build Custom Mesh"
|
||||
PROGMEM Language_Str MSG_UBL_BUILD_MESH_MENU = _UxGT("创设网格"); // "Build Mesh"
|
||||
PROGMEM Language_Str MSG_UBL_BUILD_MESH_M1 = _UxGT("创设 ") PREHEAT_1_LABEL _UxGT(" 网格"); // "Build PREHEAT_1_LABEL Mesh"
|
||||
PROGMEM Language_Str MSG_UBL_BUILD_MESH_M2 = _UxGT("创设 ") PREHEAT_2_LABEL _UxGT(" 网格"); // "Build PREHEAT_2_LABEL Mesh"
|
||||
PROGMEM Language_Str MSG_UBL_BUILD_COLD_MESH = _UxGT("创设冷网格"); // "Build Cold Mesh"
|
||||
PROGMEM Language_Str MSG_UBL_MESH_HEIGHT_ADJUST = _UxGT("调整网格高度"); // "Adjust Mesh Height"
|
||||
PROGMEM Language_Str MSG_UBL_MESH_HEIGHT_AMOUNT = _UxGT("高度合计"); // "Height Amount"
|
||||
PROGMEM Language_Str MSG_UBL_VALIDATE_MESH_MENU = _UxGT("批准网格"); // "Validate Mesh"
|
||||
PROGMEM Language_Str MSG_UBL_VALIDATE_MESH_M1 = _UxGT("批准 ") PREHEAT_1_LABEL _UxGT(" 网格"); // "Validate PREHEAT_1_LABEL Mesh"
|
||||
PROGMEM Language_Str MSG_UBL_VALIDATE_MESH_M2 = _UxGT("批准 ") PREHEAT_2_LABEL _UxGT(" 网格"); // "Validate PREHEAT_2_LABEL Mesh"
|
||||
PROGMEM Language_Str MSG_UBL_VALIDATE_CUSTOM_MESH = _UxGT("批准客户网格"); // "Validate Custom Mesh"
|
||||
PROGMEM Language_Str MSG_UBL_CONTINUE_MESH = _UxGT("继续热床网格"); // "Continue Bed Mesh"
|
||||
PROGMEM Language_Str MSG_UBL_MESH_LEVELING = _UxGT("网格调平"); // "Mesh Leveling"
|
||||
PROGMEM Language_Str MSG_UBL_3POINT_MESH_LEVELING = _UxGT("三点调平"); // "3-Point Leveling"
|
||||
PROGMEM Language_Str MSG_UBL_GRID_MESH_LEVELING = _UxGT("格子网格调平"); // "Grid Mesh Leveling"
|
||||
PROGMEM Language_Str MSG_UBL_MESH_LEVEL = _UxGT("调平网格"); // "Level Mesh"
|
||||
PROGMEM Language_Str MSG_UBL_SIDE_POINTS = _UxGT("边点"); // "Side Points"
|
||||
PROGMEM Language_Str MSG_UBL_MAP_TYPE = _UxGT("图类型"); // "Map Type"
|
||||
PROGMEM Language_Str MSG_UBL_OUTPUT_MAP = _UxGT("输出网格图"); // "Output Mesh Map"
|
||||
PROGMEM Language_Str MSG_UBL_OUTPUT_MAP_HOST = _UxGT("输出到主机"); // "Output for Host"
|
||||
PROGMEM Language_Str MSG_UBL_OUTPUT_MAP_CSV = _UxGT("输出到CSV"); // "Output for CSV"
|
||||
PROGMEM Language_Str MSG_UBL_OUTPUT_MAP_BACKUP = _UxGT("输出到备份"); // "Off Printer Backup"
|
||||
PROGMEM Language_Str MSG_UBL_INFO_UBL = _UxGT("输出UBL信息"); // "Output UBL Info"
|
||||
PROGMEM Language_Str MSG_UBL_FILLIN_AMOUNT = _UxGT("填充合计"); // "Fill-in Amount"
|
||||
PROGMEM Language_Str MSG_UBL_MANUAL_FILLIN = _UxGT("手工填充"); // "Manual Fill-in"
|
||||
PROGMEM Language_Str MSG_UBL_SMART_FILLIN = _UxGT("聪明填充"); // "Smart Fill-in"
|
||||
PROGMEM Language_Str MSG_UBL_FILLIN_MESH = _UxGT("填充网格"); // "Fill-in Mesh"
|
||||
PROGMEM Language_Str MSG_UBL_INVALIDATE_ALL = _UxGT("作废所有的"); // "Invalidate All"
|
||||
PROGMEM Language_Str MSG_UBL_INVALIDATE_CLOSEST = _UxGT("作废最近的"); // "Invalidate Closest"
|
||||
PROGMEM Language_Str MSG_UBL_FINE_TUNE_ALL = _UxGT("细调所有的"); // "Fine Tune All"
|
||||
PROGMEM Language_Str MSG_UBL_FINE_TUNE_CLOSEST = _UxGT("细调最近的"); // "Fine Tune Closest"
|
||||
PROGMEM Language_Str MSG_UBL_STORAGE_MESH_MENU = _UxGT("网格存储"); // "Mesh Storage"
|
||||
PROGMEM Language_Str MSG_UBL_STORAGE_SLOT = _UxGT("存储槽"); // "Memory Slot"
|
||||
PROGMEM Language_Str MSG_UBL_LOAD_MESH = _UxGT("装载热床网格"); // "Load Bed Mesh"
|
||||
PROGMEM Language_Str MSG_UBL_SAVE_MESH = _UxGT("保存热床网格"); // "Save Bed Mesh"
|
||||
PROGMEM Language_Str MSG_MESH_LOADED = _UxGT("M117 网格 %i 已装载"); // "Mesh %i loaded"
|
||||
PROGMEM Language_Str MSG_MESH_SAVED = _UxGT("M117 网格 %i 已保存"); // "Mesh %i saved"
|
||||
PROGMEM Language_Str MSG_UBL_NO_STORAGE = _UxGT("没有存储"); // "No storage"
|
||||
PROGMEM Language_Str MSG_UBL_SAVE_ERROR = _UxGT("错误: UBL保存"); // "Err: UBL Save"
|
||||
PROGMEM Language_Str MSG_UBL_RESTORE_ERROR = _UxGT("错误: UBL还原"); // "Err: UBL Restore"
|
||||
PROGMEM Language_Str MSG_UBL_Z_OFFSET_STOPPED = _UxGT("Z偏移已停止"); // "Z-Offset Stopped"
|
||||
PROGMEM Language_Str MSG_UBL_STEP_BY_STEP_MENU = _UxGT("一步步UBL"); // "Step-By-Step UBL"
|
||||
PROGMEM Language_Str MSG_UBL_1_BUILD_COLD_MESH = _UxGT("1. 创设冷网格");
|
||||
PROGMEM Language_Str MSG_UBL_2_SMART_FILLIN = _UxGT("2. 聪明填充");
|
||||
PROGMEM Language_Str MSG_UBL_3_VALIDATE_MESH_MENU = _UxGT("3. 批准网格");
|
||||
PROGMEM Language_Str MSG_UBL_4_FINE_TUNE_ALL = _UxGT("4. 细调所有的");
|
||||
PROGMEM Language_Str MSG_UBL_5_VALIDATE_MESH_MENU = _UxGT("5. 批准网格");
|
||||
PROGMEM Language_Str MSG_UBL_6_FINE_TUNE_ALL = _UxGT("6. 细调所有的");
|
||||
PROGMEM Language_Str MSG_UBL_7_SAVE_MESH = _UxGT("7. 保存热床网格");
|
||||
|
||||
#define MSG_LED_CONTROL _UxGT("灯管控制") // "LED Control")
|
||||
#define MSG_LEDS _UxGT("灯") // "Lights")
|
||||
#define MSG_LED_PRESETS _UxGT("灯预置") // "Light Presets")
|
||||
#define MSG_SET_LEDS_RED _UxGT("红") // "Red")
|
||||
#define MSG_SET_LEDS_ORANGE _UxGT("橙") // "Orange")
|
||||
#define MSG_SET_LEDS_YELLOW _UxGT("黄") // "Yellow")
|
||||
#define MSG_SET_LEDS_GREEN _UxGT("绿") // "Green")
|
||||
#define MSG_SET_LEDS_BLUE _UxGT("蓝") // "Blue")
|
||||
#define MSG_SET_LEDS_INDIGO _UxGT("青") // "Indigo")
|
||||
#define MSG_SET_LEDS_VIOLET _UxGT("紫") // "Violet")
|
||||
#define MSG_SET_LEDS_WHITE _UxGT("白") // "White")
|
||||
#define MSG_SET_LEDS_DEFAULT _UxGT("缺省") // "Default")
|
||||
#define MSG_CUSTOM_LEDS _UxGT("定制灯") // "Custom Lights")
|
||||
#define MSG_INTENSITY_R _UxGT("红饱和度") // "Red Intensity")
|
||||
#define MSG_INTENSITY_G _UxGT("绿饱和度") // "Green Intensity")
|
||||
#define MSG_INTENSITY_B _UxGT("蓝饱和度") // "Blue Intensity")
|
||||
#define MSG_INTENSITY_W _UxGT("白饱和度") // "White Intensity")
|
||||
#define MSG_LED_BRIGHTNESS _UxGT("亮度") // "Brightness")
|
||||
PROGMEM Language_Str MSG_LED_CONTROL = _UxGT("灯管控制"); // "LED Control")
|
||||
PROGMEM Language_Str MSG_LEDS = _UxGT("灯"); // "Lights")
|
||||
PROGMEM Language_Str MSG_LED_PRESETS = _UxGT("灯预置"); // "Light Presets")
|
||||
PROGMEM Language_Str MSG_SET_LEDS_RED = _UxGT("红"); // "Red")
|
||||
PROGMEM Language_Str MSG_SET_LEDS_ORANGE = _UxGT("橙"); // "Orange")
|
||||
PROGMEM Language_Str MSG_SET_LEDS_YELLOW = _UxGT("黄"); // "Yellow")
|
||||
PROGMEM Language_Str MSG_SET_LEDS_GREEN = _UxGT("绿"); // "Green")
|
||||
PROGMEM Language_Str MSG_SET_LEDS_BLUE = _UxGT("蓝"); // "Blue")
|
||||
PROGMEM Language_Str MSG_SET_LEDS_INDIGO = _UxGT("青"); // "Indigo")
|
||||
PROGMEM Language_Str MSG_SET_LEDS_VIOLET = _UxGT("紫"); // "Violet")
|
||||
PROGMEM Language_Str MSG_SET_LEDS_WHITE = _UxGT("白"); // "White")
|
||||
PROGMEM Language_Str MSG_SET_LEDS_DEFAULT = _UxGT("缺省"); // "Default")
|
||||
PROGMEM Language_Str MSG_CUSTOM_LEDS = _UxGT("定制灯"); // "Custom Lights")
|
||||
PROGMEM Language_Str MSG_INTENSITY_R = _UxGT("红饱和度"); // "Red Intensity")
|
||||
PROGMEM Language_Str MSG_INTENSITY_G = _UxGT("绿饱和度"); // "Green Intensity")
|
||||
PROGMEM Language_Str MSG_INTENSITY_B = _UxGT("蓝饱和度"); // "Blue Intensity")
|
||||
PROGMEM Language_Str MSG_INTENSITY_W = _UxGT("白饱和度"); // "White Intensity")
|
||||
PROGMEM Language_Str MSG_LED_BRIGHTNESS = _UxGT("亮度"); // "Brightness")
|
||||
|
||||
#define MSG_MOVING _UxGT("移动 ...") // "Moving...")
|
||||
#define MSG_FREE_XY _UxGT("释放 XY") // "Free XY")
|
||||
#define MSG_MOVE_X _UxGT("移动X") //"Move X"
|
||||
#define MSG_MOVE_Y _UxGT("移动Y") //"Move Y"
|
||||
#define MSG_MOVE_Z _UxGT("移动Z") //"Move Z"
|
||||
#define MSG_MOVE_E _UxGT("挤出机") //"Extruder"
|
||||
#define MSG_MOVE_Z_DIST _UxGT("移动 %s mm") //"Move 0.025mm"
|
||||
#define MSG_MOVE_01MM _UxGT("移动 0.1 mm") //"Move 0.1mm"
|
||||
#define MSG_MOVE_1MM _UxGT("移动 1 mm") //"Move 1mm"
|
||||
#define MSG_MOVE_10MM _UxGT("移动 10 mm") //"Move 10mm"
|
||||
#define MSG_SPEED _UxGT("速率") //"Speed"
|
||||
#define MSG_BED_Z _UxGT("热床Z") //"Bed Z"
|
||||
#define MSG_NOZZLE _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" 喷嘴") //"Nozzle" 噴嘴
|
||||
#define MSG_BED _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" 热床") //"Bed"
|
||||
#define MSG_FAN_SPEED _UxGT("风扇速率") //"Fan speed"
|
||||
#define MSG_EXTRA_FAN_SPEED _UxGT("额外风扇速率") // "Extra fan speed"
|
||||
#define MSG_FLOW _UxGT("挤出速率") //"Flow"
|
||||
#define MSG_CONTROL _UxGT("控制") //"Control"
|
||||
#define MSG_MIN _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" 最小") //" " LCD_STR_THERMOMETER " Min"
|
||||
#define MSG_MAX _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" 最大") //" " LCD_STR_THERMOMETER " Max"
|
||||
#define MSG_FACTOR _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" 因数") //" " LCD_STR_THERMOMETER " Fact"
|
||||
#define MSG_AUTOTEMP _UxGT("自动控温") //"Autotemp"
|
||||
#define MSG_LCD_ON _UxGT("开") //"On"
|
||||
#define MSG_LCD_OFF _UxGT("关") //"Off"
|
||||
#define MSG_PID_P _UxGT("PID-P") //"PID-P"
|
||||
#define MSG_PID_I _UxGT("PID-I") //"PID-I"
|
||||
#define MSG_PID_D _UxGT("PID-D") //"PID-D"
|
||||
#define MSG_PID_C _UxGT("PID-C") //"PID-C"
|
||||
#define MSG_SELECT _UxGT("选择") //"Select"
|
||||
#define MSG_ACC _UxGT("加速度") //"Accel" acceleration
|
||||
#define MSG_JERK _UxGT("抖动速率") // "Jerk"
|
||||
#if IS_KINEMATIC
|
||||
#define MSG_VA_JERK _UxGT("A轴抖动速率") //"Va-jerk"
|
||||
#define MSG_VB_JERK _UxGT("B轴抖动速率") //"Vb-jerk"
|
||||
#define MSG_VC_JERK _UxGT("C轴抖动速率") //"Vc-jerk"
|
||||
#else
|
||||
#define MSG_VA_JERK _UxGT("X轴抖动速率") //"Vx-jerk"
|
||||
#define MSG_VB_JERK _UxGT("Y轴抖动速率") //"Vy-jerk"
|
||||
#define MSG_VC_JERK _UxGT("Z轴抖动速率") //"Vz-jerk"
|
||||
#endif
|
||||
#define MSG_VE_JERK _UxGT("挤出机抖动速率") //"Ve-jerk"
|
||||
#define MSG_VELOCITY _UxGT("速度") // "Velocity"
|
||||
#define MSG_VMAX _UxGT("最大进料速率") //"Vmax " max_feedrate_mm_s
|
||||
#define MSG_VMIN _UxGT("最小进料速率") //"Vmin" min_feedrate_mm_s
|
||||
#define MSG_VTRAV_MIN _UxGT("最小移动速率") //"VTrav min" min_travel_feedrate_mm_s, (target) speed of the move
|
||||
#define MSG_ACCELERATION _UxGT("加速度") // "Acceleration"
|
||||
#define MSG_AMAX _UxGT("最大打印加速度") //"Amax " max_acceleration_mm_per_s2, acceleration in units/s^2 for print moves
|
||||
#define MSG_A_RETRACT _UxGT("收进加速度") //"A-retract" retract_acceleration, E acceleration in mm/s^2 for retracts
|
||||
#define MSG_A_TRAVEL _UxGT("非打印移动加速度") //"A-travel" travel_acceleration, X, Y, Z acceleration in mm/s^2 for travel (non printing) moves
|
||||
#define MSG_STEPS_PER_MM _UxGT("轴步数/mm") //"Steps/mm" axis_steps_per_mm, axis steps-per-unit G92
|
||||
#if IS_KINEMATIC
|
||||
#define MSG_ASTEPS _UxGT("A轴步数/mm") //"Asteps/mm"
|
||||
#define MSG_BSTEPS _UxGT("B轴步数/mm") //"Bsteps/mm"
|
||||
#define MSG_CSTEPS _UxGT("C轴步数/mm") //"Csteps/mm"
|
||||
#else
|
||||
#define MSG_ASTEPS _UxGT("X轴步数/mm") //"Xsteps/mm"
|
||||
#define MSG_BSTEPS _UxGT("Y轴步数/mm") //"Ysteps/mm"
|
||||
#define MSG_CSTEPS _UxGT("Z轴步数/mm") //"Zsteps/mm"
|
||||
#endif
|
||||
#define MSG_ESTEPS _UxGT("挤出机步数/mm") //"Esteps/mm"
|
||||
#define MSG_E0_STEPS _UxGT("挤出机1步数/mm") //"E1steps/mm"
|
||||
#define MSG_E1_STEPS _UxGT("挤出机2步数/mm") //"E2steps/mm"
|
||||
#define MSG_E2_STEPS _UxGT("挤出机3步数/mm") //"E3steps/mm"
|
||||
#define MSG_E3_STEPS _UxGT("挤出机4步数/mm") //"E4steps/mm"
|
||||
#define MSG_E4_STEPS _UxGT("挤出机5步数/mm") //"E5steps/mm"
|
||||
#define MSG_E5_STEPS _UxGT("挤出机6步数/mm") //"E6steps/mm"
|
||||
#define MSG_TEMPERATURE _UxGT("温度") //"Temperature"
|
||||
#define MSG_MOTION _UxGT("运动") //"Motion"
|
||||
#define MSG_FILAMENT _UxGT("丝料测容") //"Filament" menu_advanced_filament
|
||||
#define MSG_VOLUMETRIC_ENABLED _UxGT("测容积mm³") //"E in mm3" volumetric_enabled
|
||||
#define MSG_FILAMENT_DIAM _UxGT("丝料直径") //"Fil. Dia."
|
||||
#define MSG_FILAMENT_UNLOAD _UxGT("卸载 mm") // "Unload mm"
|
||||
#define MSG_FILAMENT_LOAD _UxGT("装载 mm") // "Load mm"
|
||||
#define MSG_ADVANCE_K _UxGT("Advance K") // "Advance K"
|
||||
#define MSG_CONTRAST _UxGT("LCD对比度") //"LCD contrast"
|
||||
#define MSG_STORE_EEPROM _UxGT("保存设置") //"Store memory"
|
||||
#define MSG_LOAD_EEPROM _UxGT("装载设置") //"Load memory"
|
||||
#define MSG_RESTORE_FAILSAFE _UxGT("恢复安全值") //"Restore failsafe"
|
||||
#define MSG_INIT_EEPROM _UxGT("初始化设置") // "Initialize EEPROM"
|
||||
#define MSG_REFRESH _UxGT("刷新") //"Refresh"
|
||||
#define MSG_WATCH _UxGT("信息屏") //"Info screen"
|
||||
#define MSG_PREPARE _UxGT("准备") //"Prepare"
|
||||
#define MSG_TUNE _UxGT("调整") //"Tune"
|
||||
#define MSG_PAUSE_PRINT _UxGT("暂停打印") //"Pause print"
|
||||
#define MSG_RESUME_PRINT _UxGT("恢复打印") //"Resume print"
|
||||
#define MSG_STOP_PRINT _UxGT("停止打印") //"Stop print"
|
||||
#define MSG_MEDIA_MENU _UxGT("从存储卡上打印") //"Print from SD"
|
||||
#define MSG_NO_MEDIA _UxGT("无存储卡") //"No SD card"
|
||||
#define MSG_DWELL _UxGT("休眠中 ...") //"Sleep..."
|
||||
#define MSG_USERWAIT _UxGT("点击继续 ...") //"Click to resume..."
|
||||
#define MSG_PRINT_PAUSED _UxGT("暫停打印") // "Print paused"
|
||||
#define MSG_PRINT_ABORTED _UxGT("已取消打印") //"Print aborted"
|
||||
#define MSG_NO_MOVE _UxGT("无移动") //"No move."
|
||||
#define MSG_KILLED _UxGT("已杀掉") //"KILLED. "
|
||||
#define MSG_STOPPED _UxGT("已停止") //"STOPPED. "
|
||||
#define MSG_CONTROL_RETRACT _UxGT("回抽长度mm") //"Retract mm" retract_length, retract length (positive mm)
|
||||
#define MSG_CONTROL_RETRACT_SWAP _UxGT("换手回抽长度mm") //"Swap Re.mm" swap_retract_length, swap retract length (positive mm), for extruder change
|
||||
#define MSG_CONTROL_RETRACTF _UxGT("回抽速率mm/s") //"Retract V" retract_feedrate_mm_s, feedrate for retracting (mm/s)
|
||||
#define MSG_CONTROL_RETRACT_ZHOP _UxGT("Hop mm") //"Hop mm" retract_zraise, retract Z-lift
|
||||
#define MSG_CONTROL_RETRACT_RECOVER _UxGT("回抽恢复长度mm") //"UnRet +mm" retract_recover_extra, additional recover length (mm, added to retract length when recovering)
|
||||
#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("换手回抽恢复长度mm") //"S UnRet+mm" swap_retract_recover_extra, additional swap recover length (mm, added to retract length when recovering from extruder change)
|
||||
#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("回抽恢复后进料速率mm/s") //"UnRet V" retract_recover_feedrate_mm_s, feedrate for recovering from retraction (mm/s)
|
||||
#define MSG_CONTROL_RETRACT_RECOVER_SWAPF _UxGT("S UnRet V") // "S UnRet V"
|
||||
#define MSG_AUTORETRACT _UxGT("自动抽回") //"AutoRetr." autoretract_enabled,
|
||||
#define MSG_FILAMENTCHANGE _UxGT("更换丝料") //"Change filament"
|
||||
#define MSG_FILAMENTLOAD _UxGT("装载丝料") // "Load filament"
|
||||
#define MSG_FILAMENTUNLOAD _UxGT("卸载丝料") // "Unload filament"
|
||||
#define MSG_FILAMENTUNLOAD_ALL _UxGT("卸载全部") // "Unload All"
|
||||
#define MSG_INIT_MEDIA _UxGT("初始化存储卡") //"Init. SD card"
|
||||
#define MSG_CHANGE_MEDIA _UxGT("更换存储卡") //"Change SD card"
|
||||
#define MSG_ZPROBE_OUT _UxGT("Z探针在热床之外") //"Z probe out. bed" Z probe is not within the physical limits
|
||||
#define MSG_SKEW_FACTOR _UxGT("偏斜因数") // "Skew Factor"
|
||||
#define MSG_BLTOUCH _UxGT("BLTouch") // "BLTouch"
|
||||
#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch 自检") // "BLTouch Self-Test"
|
||||
#define MSG_BLTOUCH_RESET _UxGT("重置BLTouch") // "Reset BLTouch"
|
||||
#define MSG_BLTOUCH_DEPLOY _UxGT("部署BLTouch") // "Deploy BLTouch"
|
||||
#define MSG_BLTOUCH_STOW _UxGT("装载BLTouch") // "Stow BLTouch"
|
||||
#define MSG_HOME_FIRST _UxGT("归位 %s%s%s 先") //"Home ... first"
|
||||
#define MSG_ZPROBE_ZOFFSET _UxGT("Z偏移") //"Z Offset"
|
||||
#define MSG_BABYSTEP_X _UxGT("微量调整X轴") //"Babystep X" lcd_babystep_x, Babystepping enables the user to control the axis in tiny amounts
|
||||
#define MSG_BABYSTEP_Y _UxGT("微量调整Y轴") //"Babystep Y"
|
||||
#define MSG_BABYSTEP_Z _UxGT("微量调整Z轴") //"Babystep Z"
|
||||
#define MSG_ENDSTOP_ABORT _UxGT("挡块终止") //"Endstop abort"
|
||||
#define MSG_HEATING_FAILED_LCD _UxGT("加热失败") //"Heating failed"
|
||||
#define MSG_ERR_REDUNDANT_TEMP _UxGT("错误：REDUNDANT TEMP") //"Err: REDUNDANT TEMP"
|
||||
#define MSG_THERMAL_RUNAWAY _UxGT("温控失控") //"THERMAL RUNAWAY"
|
||||
#define MSG_ERR_MAXTEMP _UxGT("错误：最高温度") //"Err: MAXTEMP"
|
||||
#define MSG_ERR_MINTEMP _UxGT("错误：最低温度") //"Err: MINTEMP"
|
||||
#define MSG_ERR_MAXTEMP_BED _UxGT("错误：最高热床温度") //"Err: MAXTEMP BED"
|
||||
#define MSG_ERR_MINTEMP_BED _UxGT("错误：最低热床温度") //"Err: MINTEMP BED"
|
||||
#define MSG_ERR_Z_HOMING _UxGT("归位 XY 先") // "Home XY First"
|
||||
#define MSG_HALTED _UxGT("打印停机") //"PRINTER HALTED"
|
||||
#define MSG_PLEASE_RESET _UxGT("请重置") //"Please reset"
|
||||
#define MSG_SHORT_DAY _UxGT("天") //"d" // One character only
|
||||
#define MSG_SHORT_HOUR _UxGT("时") //"h" // One character only
|
||||
#define MSG_SHORT_MINUTE _UxGT("分") //"m" // One character only
|
||||
#define MSG_HEATING _UxGT("加热中 ...") //"Heating..."
|
||||
#define MSG_BED_HEATING _UxGT("加热热床中 ...") //"Bed Heating..."
|
||||
#define MSG_DELTA_CALIBRATE _UxGT("⊿校准") //"Delta Calibration"
|
||||
#define MSG_DELTA_CALIBRATE_X _UxGT("⊿校准X") //"Calibrate X"
|
||||
#define MSG_DELTA_CALIBRATE_Y _UxGT("⊿校准Y") //"Calibrate Y"
|
||||
#define MSG_DELTA_CALIBRATE_Z _UxGT("⊿校准Z") //"Calibrate Z"
|
||||
#define MSG_DELTA_CALIBRATE_CENTER _UxGT("⊿校准中心") //"Calibrate Center"
|
||||
#define MSG_DELTA_SETTINGS _UxGT("⊿设置") // "Delta Settings"
|
||||
#define MSG_DELTA_AUTO_CALIBRATE _UxGT("⊿自动校准") // "Auto Calibration"
|
||||
#define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("设置⊿高度") // "Set Delta Height"
|
||||
#define MSG_DELTA_DIAG_ROD _UxGT("⊿斜柱") // "Diag Rod"
|
||||
#define MSG_DELTA_HEIGHT _UxGT("⊿高度") // "Height"
|
||||
#define MSG_DELTA_RADIUS _UxGT("⊿半径") // "Radius"
|
||||
#define MSG_INFO_MENU _UxGT("关于打印机") //"About Printer"
|
||||
#define MSG_INFO_PRINTER_MENU _UxGT("打印机信息") //"Printer Info"
|
||||
#define MSG_3POINT_LEVELING _UxGT("三点调平") // "3-Point Leveling"
|
||||
#define MSG_LINEAR_LEVELING _UxGT("线性调平") // "Linear Leveling"
|
||||
#define MSG_BILINEAR_LEVELING _UxGT("双线性调平") // "Bilinear Leveling"
|
||||
#define MSG_UBL_LEVELING _UxGT("统一热床调平(UBL)") // "Unified Bed Leveling"
|
||||
#define MSG_MESH_LEVELING _UxGT("网格调平") // "Mesh Leveling"
|
||||
#define MSG_INFO_STATS_MENU _UxGT("打印机统计") //"Printer Stats"
|
||||
#define MSG_INFO_BOARD_MENU _UxGT("主板信息") //"Board Info"
|
||||
#define MSG_INFO_THERMISTOR_MENU _UxGT("温度计") //"Thermistors"
|
||||
#define MSG_INFO_EXTRUDERS _UxGT("挤出机") //"Extruders"
|
||||
#define MSG_INFO_BAUDRATE _UxGT("波特率") //"Baud"
|
||||
#define MSG_INFO_PROTOCOL _UxGT("协议") //"Protocol"
|
||||
#define MSG_CASE_LIGHT _UxGT("外壳灯") // "Case light"
|
||||
#define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("灯亮度") // "Light BRIGHTNESS"
|
||||
PROGMEM Language_Str MSG_MOVING = _UxGT("移动 ..."); // "Moving...")
|
||||
PROGMEM Language_Str MSG_FREE_XY = _UxGT("释放 XY"); // "Free XY")
|
||||
PROGMEM Language_Str MSG_MOVE_X = _UxGT("移动X"); //"Move X"
|
||||
PROGMEM Language_Str MSG_MOVE_Y = _UxGT("移动Y"); //"Move Y"
|
||||
PROGMEM Language_Str MSG_MOVE_Z = _UxGT("移动Z"); //"Move Z"
|
||||
PROGMEM Language_Str MSG_MOVE_E = _UxGT("挤出机"); //"Extruder"
|
||||
PROGMEM Language_Str MSG_MOVE_E0 = _UxGT("挤出机 ") LCD_STR_E0; //"Extruder"
|
||||
PROGMEM Language_Str MSG_MOVE_E1 = _UxGT("挤出机 ") LCD_STR_E1; //"Extruder"
|
||||
PROGMEM Language_Str MSG_MOVE_E2 = _UxGT("挤出机 ") LCD_STR_E2; //"Extruder"
|
||||
PROGMEM Language_Str MSG_MOVE_E3 = _UxGT("挤出机 ") LCD_STR_E3; //"Extruder"
|
||||
PROGMEM Language_Str MSG_MOVE_E4 = _UxGT("挤出机 ") LCD_STR_E4; //"Extruder"
|
||||
PROGMEM Language_Str MSG_MOVE_E5 = _UxGT("挤出机 ") LCD_STR_E5; //"Extruder"
|
||||
PROGMEM Language_Str MSG_MOVE_Z_DIST = _UxGT("移动 %s mm"); //"Move 0.025mm"
|
||||
PROGMEM Language_Str MSG_MOVE_01MM = _UxGT("移动 0.1 mm"); //"Move 0.1mm"
|
||||
PROGMEM Language_Str MSG_MOVE_1MM = _UxGT("移动 1 mm"); //"Move 1mm"
|
||||
PROGMEM Language_Str MSG_MOVE_10MM = _UxGT("移动 10 mm"); //"Move 10mm"
|
||||
PROGMEM Language_Str MSG_SPEED = _UxGT("速率"); //"Speed"
|
||||
PROGMEM Language_Str MSG_BED_Z = _UxGT("热床Z"); //"Bed Z"
|
||||
PROGMEM Language_Str MSG_NOZZLE = " " LCD_STR_THERMOMETER _UxGT(" 喷嘴"); //"Nozzle" 噴嘴
|
||||
PROGMEM Language_Str MSG_NOZZLE_0 = " " LCD_STR_THERMOMETER _UxGT(" 喷嘴 ") LCD_STR_N0; //"Nozzle" 噴嘴
|
||||
PROGMEM Language_Str MSG_NOZZLE_1 = " " LCD_STR_THERMOMETER _UxGT(" 喷嘴 ") LCD_STR_N1; //"Nozzle" 噴嘴
|
||||
PROGMEM Language_Str MSG_NOZZLE_2 = " " LCD_STR_THERMOMETER _UxGT(" 喷嘴 ") LCD_STR_N2; //"Nozzle" 噴嘴
|
||||
PROGMEM Language_Str MSG_NOZZLE_3 = " " LCD_STR_THERMOMETER _UxGT(" 喷嘴 ") LCD_STR_N3; //"Nozzle" 噴嘴
|
||||
PROGMEM Language_Str MSG_NOZZLE_4 = " " LCD_STR_THERMOMETER _UxGT(" 喷嘴 ") LCD_STR_N4; //"Nozzle" 噴嘴
|
||||
PROGMEM Language_Str MSG_NOZZLE_5 = " " LCD_STR_THERMOMETER _UxGT(" 喷嘴 ") LCD_STR_N5; //"Nozzle" 噴嘴
|
||||
PROGMEM Language_Str MSG_BED = " " LCD_STR_THERMOMETER _UxGT(" 热床"); //"Bed"
|
||||
PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("风扇速率"); //"Fan speed"
|
||||
PROGMEM Language_Str MSG_FAN_SPEED_1 = _UxGT("风扇速率 1"); //"Fan speed"
|
||||
PROGMEM Language_Str MSG_FAN_SPEED_2 = _UxGT("风扇速率 2"); //"Fan speed"
|
||||
PROGMEM Language_Str MSG_FAN_SPEED_3 = _UxGT("风扇速率 3"); //"Fan speed"
|
||||
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED = _UxGT("额外风扇速率"); // "Extra fan speed"
|
||||
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_1 = _UxGT("额外风扇速率 1"); // "Extra fan speed"
|
||||
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_2 = _UxGT("额外风扇速率 2"); // "Extra fan speed"
|
||||
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_3 = _UxGT("额外风扇速率 3"); // "Extra fan speed"
|
||||
PROGMEM Language_Str MSG_FLOW = _UxGT("挤出速率"); //"Flow"
|
||||
PROGMEM Language_Str MSG_FLOW_0 = _UxGT("挤出速率 ") LCD_STR_N0; //"Flow"
|
||||
PROGMEM Language_Str MSG_FLOW_1 = _UxGT("挤出速率 ") LCD_STR_N1; //"Flow"
|
||||
PROGMEM Language_Str MSG_FLOW_2 = _UxGT("挤出速率 ") LCD_STR_N2; //"Flow"
|
||||
PROGMEM Language_Str MSG_FLOW_3 = _UxGT("挤出速率 ") LCD_STR_N3; //"Flow"
|
||||
PROGMEM Language_Str MSG_FLOW_4 = _UxGT("挤出速率 ") LCD_STR_N4; //"Flow"
|
||||
PROGMEM Language_Str MSG_FLOW_5 = _UxGT("挤出速率 ") LCD_STR_N5; //"Flow"
|
||||
PROGMEM Language_Str MSG_CONTROL = _UxGT("控制"); //"Control"
|
||||
PROGMEM Language_Str MSG_MIN = " " LCD_STR_THERMOMETER _UxGT(" 最小"); //" " LCD_STR_THERMOMETER " Min"
|
||||
PROGMEM Language_Str MSG_MAX = " " LCD_STR_THERMOMETER _UxGT(" 最大"); //" " LCD_STR_THERMOMETER " Max"
|
||||
PROGMEM Language_Str MSG_FACTOR = " " LCD_STR_THERMOMETER _UxGT(" 因数"); //" " LCD_STR_THERMOMETER " Fact"
|
||||
PROGMEM Language_Str MSG_AUTOTEMP = _UxGT("自动控温"); //"Autotemp"
|
||||
PROGMEM Language_Str MSG_LCD_ON = _UxGT("开"); //"On"
|
||||
PROGMEM Language_Str MSG_LCD_OFF = _UxGT("关"); //"Off"
|
||||
PROGMEM Language_Str MSG_PID_P = _UxGT("PID-P"); //"PID-P"
|
||||
PROGMEM Language_Str MSG_PID_P_E0 = _UxGT("PID-P ") LCD_STR_E0;
|
||||
PROGMEM Language_Str MSG_PID_P_E1 = _UxGT("PID-P ") LCD_STR_E1;
|
||||
PROGMEM Language_Str MSG_PID_P_E2 = _UxGT("PID-P ") LCD_STR_E2;
|
||||
PROGMEM Language_Str MSG_PID_P_E3 = _UxGT("PID-P ") LCD_STR_E3;
|
||||
PROGMEM Language_Str MSG_PID_P_E4 = _UxGT("PID-P ") LCD_STR_E4;
|
||||
PROGMEM Language_Str MSG_PID_P_E5 = _UxGT("PID-P ") LCD_STR_E5;
|
||||
PROGMEM Language_Str MSG_PID_I = _UxGT("PID-I"); //"PID-I"
|
||||
PROGMEM Language_Str MSG_PID_I_E0 = _UxGT("PID-I ") LCD_STR_E0;
|
||||
PROGMEM Language_Str MSG_PID_I_E1 = _UxGT("PID-I ") LCD_STR_E1;
|
||||
PROGMEM Language_Str MSG_PID_I_E2 = _UxGT("PID-I ") LCD_STR_E2;
|
||||
PROGMEM Language_Str MSG_PID_I_E3 = _UxGT("PID-I ") LCD_STR_E3;
|
||||
PROGMEM Language_Str MSG_PID_I_E4 = _UxGT("PID-I ") LCD_STR_E4;
|
||||
PROGMEM Language_Str MSG_PID_I_E5 = _UxGT("PID-I ") LCD_STR_E5;
|
||||
PROGMEM Language_Str MSG_PID_D = _UxGT("PID-D"); //"PID-D"
|
||||
PROGMEM Language_Str MSG_PID_D_E0 = _UxGT("PID-D ") LCD_STR_E0;
|
||||
PROGMEM Language_Str MSG_PID_D_E1 = _UxGT("PID-D ") LCD_STR_E1;
|
||||
PROGMEM Language_Str MSG_PID_D_E2 = _UxGT("PID-D ") LCD_STR_E2;
|
||||
PROGMEM Language_Str MSG_PID_D_E3 = _UxGT("PID-D ") LCD_STR_E3;
|
||||
PROGMEM Language_Str MSG_PID_D_E4 = _UxGT("PID-D ") LCD_STR_E4;
|
||||
PROGMEM Language_Str MSG_PID_D_E5 = _UxGT("PID-D ") LCD_STR_E5;
|
||||
PROGMEM Language_Str MSG_PID_C = _UxGT("PID-C"); //"PID-C"
|
||||
PROGMEM Language_Str MSG_PID_C_E0 = _UxGT("PID-C ") LCD_STR_E0;
|
||||
PROGMEM Language_Str MSG_PID_C_E1 = _UxGT("PID-C ") LCD_STR_E1;
|
||||
PROGMEM Language_Str MSG_PID_C_E2 = _UxGT("PID-C ") LCD_STR_E2;
|
||||
PROGMEM Language_Str MSG_PID_C_E3 = _UxGT("PID-C ") LCD_STR_E3;
|
||||
PROGMEM Language_Str MSG_PID_C_E4 = _UxGT("PID-C ") LCD_STR_E4;
|
||||
PROGMEM Language_Str MSG_PID_C_E5 = _UxGT("PID-C ") LCD_STR_E5;
|
||||
PROGMEM Language_Str MSG_SELECT = _UxGT("选择"); //"Select"
|
||||
PROGMEM Language_Str MSG_SELECT_E0 = _UxGT("选择 ") LCD_STR_E0;
|
||||
PROGMEM Language_Str MSG_SELECT_E1 = _UxGT("选择 ") LCD_STR_E1;
|
||||
PROGMEM Language_Str MSG_SELECT_E2 = _UxGT("选择 ") LCD_STR_E2;
|
||||
PROGMEM Language_Str MSG_SELECT_E3 = _UxGT("选择 ") LCD_STR_E3;
|
||||
PROGMEM Language_Str MSG_SELECT_E4 = _UxGT("选择 ") LCD_STR_E4;
|
||||
PROGMEM Language_Str MSG_SELECT_E5 = _UxGT("选择 ") LCD_STR_E5;
|
||||
PROGMEM Language_Str MSG_ACC = _UxGT("加速度"); //"Accel" acceleration
|
||||
PROGMEM Language_Str MSG_JERK = _UxGT("抖动速率"); // "Jerk"
|
||||
PROGMEM Language_Str MSG_VA_JERK = _UxGT("轴抖动速率") LCD_STR_A; //"Va-jerk"
|
||||
PROGMEM Language_Str MSG_VB_JERK = _UxGT("轴抖动速率") LCD_STR_B; //"Vb-jerk"
|
||||
PROGMEM Language_Str MSG_VC_JERK = _UxGT("轴抖动速率") LCD_STR_C; //"Vc-jerk"
|
||||
PROGMEM Language_Str MSG_VE_JERK = _UxGT("挤出机抖动速率"); //"Ve-jerk"
|
||||
PROGMEM Language_Str MSG_VELOCITY = _UxGT("速度"); // "Velocity"
|
||||
PROGMEM Language_Str MSG_VMAX_A = _UxGT("最大进料速率") LCD_STR_A; //"Vmax " max_feedrate_mm_s
|
||||
PROGMEM Language_Str MSG_VMAX_B = _UxGT("最大进料速率") LCD_STR_B; //"Vmax " max_feedrate_mm_s
|
||||
PROGMEM Language_Str MSG_VMAX_C = _UxGT("最大进料速率") LCD_STR_C; //"Vmax " max_feedrate_mm_s
|
||||
PROGMEM Language_Str MSG_VMAX_E = _UxGT("最大进料速率") LCD_STR_E; //"Vmax " max_feedrate_mm_s
|
||||
PROGMEM Language_Str MSG_VMAX_E0 = _UxGT("最大进料速率 ") LCD_STR_E0; //"Vmax " max_feedrate_mm_s
|
||||
PROGMEM Language_Str MSG_VMAX_E1 = _UxGT("最大进料速率 ") LCD_STR_E1; //"Vmax " max_feedrate_mm_s
|
||||
PROGMEM Language_Str MSG_VMAX_E2 = _UxGT("最大进料速率 ") LCD_STR_E2; //"Vmax " max_feedrate_mm_s
|
||||
PROGMEM Language_Str MSG_VMAX_E3 = _UxGT("最大进料速率 ") LCD_STR_E3; //"Vmax " max_feedrate_mm_s
|
||||
PROGMEM Language_Str MSG_VMAX_E4 = _UxGT("最大进料速率 ") LCD_STR_E4; //"Vmax " max_feedrate_mm_s
|
||||
PROGMEM Language_Str MSG_VMAX_E5 = _UxGT("最大进料速率 ") LCD_STR_E5; //"Vmax " max_feedrate_mm_s
|
||||
PROGMEM Language_Str MSG_VMIN = _UxGT("最小进料速率"); //"Vmin" min_feedrate_mm_s
|
||||
PROGMEM Language_Str MSG_VTRAV_MIN = _UxGT("最小移动速率"); //"VTrav min" min_travel_feedrate_mm_s, (target) speed of the move
|
||||
PROGMEM Language_Str MSG_ACCELERATION = _UxGT("加速度"); // "Acceleration"
|
||||
PROGMEM Language_Str MSG_AMAX_A = _UxGT("最大打印加速度") LCD_STR_A; //"Amax " max_acceleration_mm_per_s2, acceleration in units/s^2 for print moves
|
||||
PROGMEM Language_Str MSG_AMAX_B = _UxGT("最大打印加速度") LCD_STR_B; //"Amax " max_acceleration_mm_per_s2, acceleration in units/s^2 for print moves
|
||||
PROGMEM Language_Str MSG_AMAX_C = _UxGT("最大打印加速度") LCD_STR_C; //"Amax " max_acceleration_mm_per_s2, acceleration in units/s^2 for print moves
|
||||
PROGMEM Language_Str MSG_AMAX_E = _UxGT("最大打印加速度") LCD_STR_E; //"Amax " max_acceleration_mm_per_s2, acceleration in units/s^2 for print moves
|
||||
PROGMEM Language_Str MSG_AMAX_E0 = _UxGT("最大打印加速度 ") LCD_STR_E0; //"Amax " max_acceleration_mm_per_s2, acceleration in units/s^2 for print moves
|
||||
PROGMEM Language_Str MSG_AMAX_E1 = _UxGT("最大打印加速度 ") LCD_STR_E1; //"Amax " max_acceleration_mm_per_s2, acceleration in units/s^2 for print moves
|
||||
PROGMEM Language_Str MSG_AMAX_E2 = _UxGT("最大打印加速度 ") LCD_STR_E2; //"Amax " max_acceleration_mm_per_s2, acceleration in units/s^2 for print moves
|
||||
PROGMEM Language_Str MSG_AMAX_E3 = _UxGT("最大打印加速度 ") LCD_STR_E3; //"Amax " max_acceleration_mm_per_s2, acceleration in units/s^2 for print moves
|
||||
PROGMEM Language_Str MSG_AMAX_E4 = _UxGT("最大打印加速度 ") LCD_STR_E4; //"Amax " max_acceleration_mm_per_s2, acceleration in units/s^2 for print moves
|
||||
PROGMEM Language_Str MSG_AMAX_E5 = _UxGT("最大打印加速度 ") LCD_STR_E5; //"Amax " max_acceleration_mm_per_s2, acceleration in units/s^2 for print moves
|
||||
PROGMEM Language_Str MSG_A_RETRACT = _UxGT("收进加速度"); //"A-retract" retract_acceleration, E acceleration in mm/s^2 for retracts
|
||||
PROGMEM Language_Str MSG_A_TRAVEL = _UxGT("非打印移动加速度"); //"A-travel" travel_acceleration, X, Y, Z acceleration in mm/s^2 for travel (non printing) moves
|
||||
PROGMEM Language_Str MSG_STEPS_PER_MM = _UxGT("轴步数/mm"); //"Steps/mm" axis_steps_per_mm, axis steps-per-unit G92
|
||||
PROGMEM Language_Str MSG_A_STEPS = LCD_STR_A _UxGT("轴步数/mm"); //"Asteps/mm"
|
||||
PROGMEM Language_Str MSG_B_STEPS = LCD_STR_B _UxGT("轴步数/mm"); //"Bsteps/mm"
|
||||
PROGMEM Language_Str MSG_C_STEPS = LCD_STR_C _UxGT("轴步数/mm"); //"Csteps/mm"
|
||||
PROGMEM Language_Str MSG_E_STEPS = _UxGT("挤出机步数/mm"); //"Esteps/mm"
|
||||
PROGMEM Language_Str MSG_E0_STEPS = _UxGT("挤出机") LCD_STR_N0 _UxGT("步数/mm");
|
||||
PROGMEM Language_Str MSG_E1_STEPS = _UxGT("挤出机") LCD_STR_N1 _UxGT("步数/mm");
|
||||
PROGMEM Language_Str MSG_E2_STEPS = _UxGT("挤出机") LCD_STR_N2 _UxGT("步数/mm");
|
||||
PROGMEM Language_Str MSG_E3_STEPS = _UxGT("挤出机") LCD_STR_N3 _UxGT("步数/mm");
|
||||
PROGMEM Language_Str MSG_E4_STEPS = _UxGT("挤出机") LCD_STR_N4 _UxGT("步数/mm");
|
||||
PROGMEM Language_Str MSG_E5_STEPS = _UxGT("挤出机") LCD_STR_N5 _UxGT("步数/mm");
|
||||
PROGMEM Language_Str MSG_TEMPERATURE = _UxGT("温度"); //"Temperature"
|
||||
PROGMEM Language_Str MSG_MOTION = _UxGT("运动"); //"Motion"
|
||||
PROGMEM Language_Str MSG_FILAMENT = _UxGT("丝料测容"); //"Filament" menu_advanced_filament
|
||||
PROGMEM Language_Str MSG_VOLUMETRIC_ENABLED = _UxGT("测容积mm³"); //"E in mm3" volumetric_enabled
|
||||
PROGMEM Language_Str MSG_FILAMENT_DIAM = _UxGT("丝料直径"); //"Fil. Dia."
|
||||
PROGMEM Language_Str MSG_FILAMENT_DIAM_E0 = _UxGT("丝料直径 ") LCD_STR_E0;
|
||||
PROGMEM Language_Str MSG_FILAMENT_DIAM_E1 = _UxGT("丝料直径 ") LCD_STR_E1;
|
||||
PROGMEM Language_Str MSG_FILAMENT_DIAM_E2 = _UxGT("丝料直径 ") LCD_STR_E2;
|
||||
PROGMEM Language_Str MSG_FILAMENT_DIAM_E3 = _UxGT("丝料直径 ") LCD_STR_E3;
|
||||
PROGMEM Language_Str MSG_FILAMENT_DIAM_E4 = _UxGT("丝料直径 ") LCD_STR_E4;
|
||||
PROGMEM Language_Str MSG_FILAMENT_DIAM_E5 = _UxGT("丝料直径 ") LCD_STR_E5;
|
||||
PROGMEM Language_Str MSG_FILAMENT_UNLOAD = _UxGT("卸载 mm"); // "Unload mm"
|
||||
PROGMEM Language_Str MSG_FILAMENT_LOAD = _UxGT("装载 mm"); // "Load mm"
|
||||
PROGMEM Language_Str MSG_CONTRAST = _UxGT("LCD对比度"); //"LCD contrast"
|
||||
PROGMEM Language_Str MSG_STORE_EEPROM = _UxGT("保存设置"); //"Store memory"
|
||||
PROGMEM Language_Str MSG_LOAD_EEPROM = _UxGT("装载设置"); //"Load memory"
|
||||
PROGMEM Language_Str MSG_RESTORE_FAILSAFE = _UxGT("恢复安全值"); //"Restore failsafe"
|
||||
PROGMEM Language_Str MSG_INIT_EEPROM = _UxGT("初始化设置"); // "Initialize EEPROM"
|
||||
PROGMEM Language_Str MSG_REFRESH = LCD_STR_REFRESH _UxGT("刷新"); //"Refresh"
|
||||
PROGMEM Language_Str MSG_WATCH = _UxGT("信息屏"); //"Info screen"
|
||||
PROGMEM Language_Str MSG_PREPARE = _UxGT("准备"); //"Prepare"
|
||||
PROGMEM Language_Str MSG_TUNE = _UxGT("调整"); //"Tune"
|
||||
PROGMEM Language_Str MSG_PAUSE_PRINT = _UxGT("暂停打印"); //"Pause print"
|
||||
PROGMEM Language_Str MSG_RESUME_PRINT = _UxGT("恢复打印"); //"Resume print"
|
||||
PROGMEM Language_Str MSG_STOP_PRINT = _UxGT("停止打印"); //"Stop print"
|
||||
PROGMEM Language_Str MSG_MEDIA_MENU = _UxGT("从存储卡上打印"); //"Print from SD"
|
||||
PROGMEM Language_Str MSG_NO_MEDIA = _UxGT("无存储卡"); //"No SD card"
|
||||
PROGMEM Language_Str MSG_DWELL = _UxGT("休眠中 ..."); //"Sleep..."
|
||||
PROGMEM Language_Str MSG_USERWAIT = _UxGT("点击继续 ..."); //"Click to resume..."
|
||||
PROGMEM Language_Str MSG_PRINT_PAUSED = _UxGT("暫停打印"); // "Print paused"
|
||||
PROGMEM Language_Str MSG_PRINT_ABORTED = _UxGT("已取消打印"); //"Print aborted"
|
||||
PROGMEM Language_Str MSG_NO_MOVE = _UxGT("无移动"); //"No move."
|
||||
PROGMEM Language_Str MSG_KILLED = _UxGT("已杀掉"); //"KILLED. "
|
||||
PROGMEM Language_Str MSG_STOPPED = _UxGT("已停止"); //"STOPPED. "
|
||||
PROGMEM Language_Str MSG_CONTROL_RETRACT = _UxGT("回抽长度mm"); //"Retract mm" retract_length, retract length (positive mm)
|
||||
PROGMEM Language_Str MSG_CONTROL_RETRACT_SWAP = _UxGT("换手回抽长度mm"); //"Swap Re.mm" swap_retract_length, swap retract length (positive mm), for extruder change
|
||||
PROGMEM Language_Str MSG_CONTROL_RETRACTF = _UxGT("回抽速率mm/s"); //"Retract V" retract_feedrate_mm_s, feedrate for retracting (mm/s)
|
||||
PROGMEM Language_Str MSG_CONTROL_RETRACT_ZHOP = _UxGT("Hop mm"); //"Hop mm" retract_zraise, retract Z-lift
|
||||
PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVER = _UxGT("回抽恢复长度mm"); //"UnRet +mm" retract_recover_extra, additional recover length (mm, added to retract length when recovering)
|
||||
PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVER_SWAP = _UxGT("换手回抽恢复长度mm"); //"S UnRet+mm" swap_retract_recover_extra, additional swap recover length (mm, added to retract length when recovering from extruder change)
|
||||
PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVERF = _UxGT("回抽恢复后进料速率mm/s"); //"UnRet V" retract_recover_feedrate_mm_s, feedrate for recovering from retraction (mm/s)
|
||||
PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVER_SWAPF = _UxGT("S UnRet V"); // "S UnRet V"
|
||||
PROGMEM Language_Str MSG_AUTORETRACT = _UxGT("自动抽回"); //"AutoRetr." autoretract_enabled,
|
||||
PROGMEM Language_Str MSG_FILAMENTCHANGE = _UxGT("更换丝料"); //"Change filament"
|
||||
PROGMEM Language_Str MSG_FILAMENTCHANGE_E0 = _UxGT("更换丝料 ") LCD_STR_E0; //"Change filament"
|
||||
PROGMEM Language_Str MSG_FILAMENTCHANGE_E1 = _UxGT("更换丝料 ") LCD_STR_E1; //"Change filament"
|
||||
PROGMEM Language_Str MSG_FILAMENTCHANGE_E2 = _UxGT("更换丝料 ") LCD_STR_E2; //"Change filament"
|
||||
PROGMEM Language_Str MSG_FILAMENTCHANGE_E3 = _UxGT("更换丝料 ") LCD_STR_E3; //"Change filament"
|
||||
PROGMEM Language_Str MSG_FILAMENTCHANGE_E4 = _UxGT("更换丝料 ") LCD_STR_E4; //"Change filament"
|
||||
PROGMEM Language_Str MSG_FILAMENTCHANGE_E5 = _UxGT("更换丝料 ") LCD_STR_E5; //"Change filament"
|
||||
PROGMEM Language_Str MSG_FILAMENTLOAD_E0 = _UxGT("装载丝料 ") LCD_STR_E0; // "Load filament"
|
||||
PROGMEM Language_Str MSG_FILAMENTLOAD_E1 = _UxGT("装载丝料 ") LCD_STR_E1; // "Load filament"
|
||||
PROGMEM Language_Str MSG_FILAMENTLOAD_E2 = _UxGT("装载丝料 ") LCD_STR_E2; // "Load filament"
|
||||
PROGMEM Language_Str MSG_FILAMENTLOAD_E3 = _UxGT("装载丝料 ") LCD_STR_E3; // "Load filament"
|
||||
PROGMEM Language_Str MSG_FILAMENTLOAD_E4 = _UxGT("装载丝料 ") LCD_STR_E4; // "Load filament"
|
||||
PROGMEM Language_Str MSG_FILAMENTLOAD_E5 = _UxGT("装载丝料 ") LCD_STR_E5; // "Load filament"
|
||||
PROGMEM Language_Str MSG_FILAMENTUNLOAD_E0 = _UxGT("卸载丝料 ") LCD_STR_E0; // "Unload filament"
|
||||
PROGMEM Language_Str MSG_FILAMENTUNLOAD_E1 = _UxGT("卸载丝料 ") LCD_STR_E1; // "Unload filament"
|
||||
PROGMEM Language_Str MSG_FILAMENTUNLOAD_E2 = _UxGT("卸载丝料 ") LCD_STR_E2; // "Unload filament"
|
||||
PROGMEM Language_Str MSG_FILAMENTUNLOAD_E3 = _UxGT("卸载丝料 ") LCD_STR_E3; // "Unload filament"
|
||||
PROGMEM Language_Str MSG_FILAMENTUNLOAD_E4 = _UxGT("卸载丝料 ") LCD_STR_E4; // "Unload filament"
|
||||
PROGMEM Language_Str MSG_FILAMENTUNLOAD_E5 = _UxGT("卸载丝料 ") LCD_STR_E5; // "Unload filament"
|
||||
PROGMEM Language_Str MSG_FILAMENTUNLOAD_ALL = _UxGT("卸载全部"); // "Unload All"
|
||||
PROGMEM Language_Str MSG_INIT_MEDIA = _UxGT("初始化存储卡"); //"Init. SD card"
|
||||
PROGMEM Language_Str MSG_CHANGE_MEDIA = _UxGT("更换存储卡"); //"Change SD card"
|
||||
PROGMEM Language_Str MSG_ZPROBE_OUT = _UxGT("Z探针在热床之外"); //"Z probe out. bed" Z probe is not within the physical limits
|
||||
PROGMEM Language_Str MSG_SKEW_FACTOR = _UxGT("偏斜因数"); // "Skew Factor"
|
||||
PROGMEM Language_Str MSG_BLTOUCH = _UxGT("BLTouch"); // "BLTouch"
|
||||
PROGMEM Language_Str MSG_BLTOUCH_SELFTEST = _UxGT("BLTouch 自检"); // "BLTouch Self-Test"
|
||||
PROGMEM Language_Str MSG_BLTOUCH_RESET = _UxGT("重置BLTouch"); // "Reset BLTouch"
|
||||
PROGMEM Language_Str MSG_BLTOUCH_DEPLOY = _UxGT("部署BLTouch"); // "Deploy BLTouch"
|
||||
PROGMEM Language_Str MSG_BLTOUCH_STOW = _UxGT("装载BLTouch"); // "Stow BLTouch"
|
||||
PROGMEM Language_Str MSG_HOME_FIRST = _UxGT("归位 %s%s%s 先"); //"Home ... first"
|
||||
PROGMEM Language_Str MSG_ZPROBE_ZOFFSET = _UxGT("Z偏移"); //"Z Offset"
|
||||
PROGMEM Language_Str MSG_BABYSTEP_X = _UxGT("微量调整X轴"); //"Babystep X" lcd_babystep_x, Babystepping enables the user to control the axis in tiny amounts
|
||||
PROGMEM Language_Str MSG_BABYSTEP_Y = _UxGT("微量调整Y轴"); //"Babystep Y"
|
||||
PROGMEM Language_Str MSG_BABYSTEP_Z = _UxGT("微量调整Z轴"); //"Babystep Z"
|
||||
PROGMEM Language_Str MSG_ENDSTOP_ABORT = _UxGT("挡块终止"); //"Endstop abort"
|
||||
PROGMEM Language_Str MSG_HEATING_FAILED_LCD = _UxGT("加热失败"); //"Heating failed"
|
||||
PROGMEM Language_Str MSG_ERR_REDUNDANT_TEMP = _UxGT("错误：REDUNDANT TEMP"); //"Err: REDUNDANT TEMP"
|
||||
PROGMEM Language_Str MSG_THERMAL_RUNAWAY = _UxGT("温控失控"); //"THERMAL RUNAWAY"
|
||||
PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("错误：最高温度"); //"Err: MAXTEMP"
|
||||
PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("错误：最低温度"); //"Err: MINTEMP"
|
||||
PROGMEM Language_Str MSG_ERR_MAXTEMP_BED = _UxGT("错误：最高热床温度"); //"Err: MAXTEMP BED"
|
||||
PROGMEM Language_Str MSG_ERR_MINTEMP_BED = _UxGT("错误：最低热床温度"); //"Err: MINTEMP BED"
|
||||
PROGMEM Language_Str MSG_ERR_Z_HOMING = _UxGT("归位 XY 先"); // "Home XY First"
|
||||
PROGMEM Language_Str MSG_HALTED = _UxGT("打印停机"); //"PRINTER HALTED"
|
||||
PROGMEM Language_Str MSG_PLEASE_RESET = _UxGT("请重置"); //"Please reset"
|
||||
PROGMEM Language_Str MSG_SHORT_DAY = _UxGT("天"); //"d" // One character only
|
||||
PROGMEM Language_Str MSG_SHORT_HOUR = _UxGT("时"); //"h" // One character only
|
||||
PROGMEM Language_Str MSG_SHORT_MINUTE = _UxGT("分"); //"m" // One character only
|
||||
PROGMEM Language_Str MSG_HEATING = _UxGT("加热中 ..."); //"Heating..."
|
||||
PROGMEM Language_Str MSG_BED_HEATING = _UxGT("加热热床中 ..."); //"Bed Heating..."
|
||||
PROGMEM Language_Str MSG_DELTA_CALIBRATE = _UxGT("⊿校准"); //"Delta Calibration"
|
||||
PROGMEM Language_Str MSG_DELTA_CALIBRATE_X = _UxGT("⊿校准X"); //"Calibrate X"
|
||||
PROGMEM Language_Str MSG_DELTA_CALIBRATE_Y = _UxGT("⊿校准Y"); //"Calibrate Y"
|
||||
PROGMEM Language_Str MSG_DELTA_CALIBRATE_Z = _UxGT("⊿校准Z"); //"Calibrate Z"
|
||||
PROGMEM Language_Str MSG_DELTA_CALIBRATE_CENTER = _UxGT("⊿校准中心"); //"Calibrate Center"
|
||||
PROGMEM Language_Str MSG_DELTA_SETTINGS = _UxGT("⊿设置"); // "Delta Settings"
|
||||
PROGMEM Language_Str MSG_DELTA_AUTO_CALIBRATE = _UxGT("⊿自动校准"); // "Auto Calibration"
|
||||
PROGMEM Language_Str MSG_DELTA_HEIGHT_CALIBRATE = _UxGT("设置⊿高度"); // "Set Delta Height"
|
||||
PROGMEM Language_Str MSG_DELTA_DIAG_ROD = _UxGT("⊿斜柱"); // "Diag Rod"
|
||||
PROGMEM Language_Str MSG_DELTA_HEIGHT = _UxGT("⊿高度"); // "Height"
|
||||
PROGMEM Language_Str MSG_DELTA_RADIUS = _UxGT("⊿半径"); // "Radius"
|
||||
PROGMEM Language_Str MSG_INFO_MENU = _UxGT("关于打印机"); //"About Printer"
|
||||
PROGMEM Language_Str MSG_INFO_PRINTER_MENU = _UxGT("打印机信息"); //"Printer Info"
|
||||
PROGMEM Language_Str MSG_3POINT_LEVELING = _UxGT("三点调平"); // "3-Point Leveling"
|
||||
PROGMEM Language_Str MSG_LINEAR_LEVELING = _UxGT("线性调平"); // "Linear Leveling"
|
||||
PROGMEM Language_Str MSG_BILINEAR_LEVELING = _UxGT("双线性调平"); // "Bilinear Leveling"
|
||||
PROGMEM Language_Str MSG_UBL_LEVELING = _UxGT("统一热床调平(UBL)"); // "Unified Bed Leveling"
|
||||
PROGMEM Language_Str MSG_MESH_LEVELING = _UxGT("网格调平"); // "Mesh Leveling"
|
||||
PROGMEM Language_Str MSG_INFO_STATS_MENU = _UxGT("打印机统计"); //"Printer Stats"
|
||||
PROGMEM Language_Str MSG_INFO_BOARD_MENU = _UxGT("主板信息"); //"Board Info"
|
||||
PROGMEM Language_Str MSG_INFO_THERMISTOR_MENU = _UxGT("温度计"); //"Thermistors"
|
||||
PROGMEM Language_Str MSG_INFO_EXTRUDERS = _UxGT("挤出机"); //"Extruders"
|
||||
PROGMEM Language_Str MSG_INFO_BAUDRATE = _UxGT("波特率"); //"Baud"
|
||||
PROGMEM Language_Str MSG_INFO_PROTOCOL = _UxGT("协议"); //"Protocol"
|
||||
PROGMEM Language_Str MSG_CASE_LIGHT = _UxGT("外壳灯"); // "Case light"
|
||||
PROGMEM Language_Str MSG_CASE_LIGHT_BRIGHTNESS = _UxGT("灯亮度"); // "Light BRIGHTNESS"
|
||||
|
||||
#define MSG_EXPECTED_PRINTER _UxGT("打印机不正确") // "The printer is incorrect"
|
||||
PROGMEM Language_Str MSG_EXPECTED_PRINTER = _UxGT("打印机不正确"); // "The printer is incorrect"
|
||||
|
||||
#if LCD_WIDTH >= 20
|
||||
#define MSG_INFO_PRINT_COUNT _UxGT("打印计数") //"Print Count"
|
||||
#define MSG_INFO_COMPLETED_PRINTS _UxGT("完成了") //"Completed"
|
||||
#define MSG_INFO_PRINT_TIME _UxGT("总打印时间") //"Total print time"
|
||||
#define MSG_INFO_PRINT_LONGEST _UxGT("最长工作时间") //"Longest job time"
|
||||
#define MSG_INFO_PRINT_FILAMENT _UxGT("总计挤出") //"Extruded total"
|
||||
#else
|
||||
#define MSG_INFO_PRINT_COUNT _UxGT("打印数") //"Prints"
|
||||
#define MSG_INFO_COMPLETED_PRINTS _UxGT("完成") //"Completed"
|
||||
#define MSG_INFO_PRINT_TIME _UxGT("总共") //"Total"
|
||||
#define MSG_INFO_PRINT_LONGEST _UxGT("最长") //"Longest"
|
||||
#define MSG_INFO_PRINT_FILAMENT _UxGT("已挤出") //"Extruded"
|
||||
#endif
|
||||
#if LCD_WIDTH >= 20
|
||||
PROGMEM Language_Str MSG_INFO_PRINT_COUNT = _UxGT("打印计数"); //"Print Count"
|
||||
PROGMEM Language_Str MSG_INFO_COMPLETED_PRINTS = _UxGT("完成了"); //"Completed"
|
||||
PROGMEM Language_Str MSG_INFO_PRINT_TIME = _UxGT("总打印时间"); //"Total print time"
|
||||
PROGMEM Language_Str MSG_INFO_PRINT_LONGEST = _UxGT("最长工作时间"); //"Longest job time"
|
||||
PROGMEM Language_Str MSG_INFO_PRINT_FILAMENT = _UxGT("总计挤出"); //"Extruded total"
|
||||
#else
|
||||
PROGMEM Language_Str MSG_INFO_PRINT_COUNT = _UxGT("打印数"); //"Prints"
|
||||
PROGMEM Language_Str MSG_INFO_COMPLETED_PRINTS = _UxGT("完成"); //"Completed"
|
||||
PROGMEM Language_Str MSG_INFO_PRINT_TIME = _UxGT("总共"); //"Total"
|
||||
PROGMEM Language_Str MSG_INFO_PRINT_LONGEST = _UxGT("最长"); //"Longest"
|
||||
PROGMEM Language_Str MSG_INFO_PRINT_FILAMENT = _UxGT("已挤出"); //"Extruded"
|
||||
#endif
|
||||
|
||||
#define MSG_INFO_MIN_TEMP _UxGT("最低温度") //"Min Temp"
|
||||
#define MSG_INFO_MAX_TEMP _UxGT("最高温度") //"Max Temp"
|
||||
#define MSG_INFO_PSU _UxGT("电源供应") //"Power Supply"
|
||||
#define MSG_DRIVE_STRENGTH _UxGT("驱动力度") // "Drive Strength"
|
||||
#define MSG_DAC_PERCENT _UxGT("驱动 %") // "Driver %"
|
||||
#define MSG_DAC_EEPROM_WRITE _UxGT("保存驱动设置") // "DAC EEPROM Write"
|
||||
#define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("打印已暂停") // "PRINT PAUSED"
|
||||
#define MSG_FILAMENT_CHANGE_HEADER_LOAD _UxGT("装载丝料") // "LOAD FILAMENT"
|
||||
#define MSG_FILAMENT_CHANGE_HEADER_UNLOAD _UxGT("卸载丝料") // "UNLOAD FILAMENT"
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("恢复选项:") // "RESUME OPTIONS:"
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_PURGE _UxGT("清除更多") // "Purge more"
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("恢复打印") //"Resume print"
|
||||
#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" 喷嘴: ") // " Nozzle: "
|
||||
#define MSG_ERR_HOMING_FAILED _UxGT("归原位失败") // "Homing failed"
|
||||
#define MSG_ERR_PROBING_FAILED _UxGT("探针探测失败") // "Probing failed"
|
||||
#define MSG_M600_TOO_COLD _UxGT("M600: 太凉") // "M600: Too cold"
|
||||
PROGMEM Language_Str MSG_INFO_MIN_TEMP = _UxGT("最低温度"); //"Min Temp"
|
||||
PROGMEM Language_Str MSG_INFO_MAX_TEMP = _UxGT("最高温度"); //"Max Temp"
|
||||
PROGMEM Language_Str MSG_INFO_PSU = _UxGT("电源供应"); //"Power Supply"
|
||||
PROGMEM Language_Str MSG_DRIVE_STRENGTH = _UxGT("驱动力度"); // "Drive Strength"
|
||||
PROGMEM Language_Str MSG_DAC_PERCENT = _UxGT("驱动 %"); // "Driver %"
|
||||
PROGMEM Language_Str MSG_DAC_EEPROM_WRITE = _UxGT("保存驱动设置"); // "DAC EEPROM Write"
|
||||
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEADER_PAUSE = _UxGT("打印已暂停"); // "PRINT PAUSED"
|
||||
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEADER_LOAD = _UxGT("装载丝料"); // "LOAD FILAMENT"
|
||||
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEADER_UNLOAD = _UxGT("卸载丝料"); // "UNLOAD FILAMENT"
|
||||
PROGMEM Language_Str MSG_FILAMENT_CHANGE_OPTION_HEADER = _UxGT("恢复选项:"); // "RESUME OPTIONS:"
|
||||
PROGMEM Language_Str MSG_FILAMENT_CHANGE_OPTION_PURGE = _UxGT("清除更多"); // "Purge more"
|
||||
PROGMEM Language_Str MSG_FILAMENT_CHANGE_OPTION_RESUME = _UxGT("恢复打印"); //"Resume print"
|
||||
PROGMEM Language_Str MSG_FILAMENT_CHANGE_NOZZLE = _UxGT(" 喷嘴: "); // " Nozzle: "
|
||||
PROGMEM Language_Str MSG_LCD_HOMING_FAILED = _UxGT("归原位失败"); // "Homing failed"
|
||||
PROGMEM Language_Str MSG_LCD_PROBING_FAILED = _UxGT("探针探测失败"); // "Probing failed"
|
||||
PROGMEM Language_Str MSG_M600_TOO_COLD = _UxGT("M600: 太凉"); // "M600: Too cold"
|
||||
|
||||
#if LCD_HEIGHT >= 4
|
||||
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("等待开始") //"Wait for start"
|
||||
#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("丝料") //"of the filament"
|
||||
#define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("变更") //"change"
|
||||
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("等待") //"Wait for"
|
||||
#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("卸下丝料") //"filament unload"
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("插入丝料") //"Insert filament"
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("并按键") //"and press button"
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("来继续 ...") //"to continue..."
|
||||
#define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("按下按钮来") // "Press button to"
|
||||
#define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("加热喷嘴.") // "heat nozzle."
|
||||
#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("加热喷嘴") // "Heating nozzle"
|
||||
#define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("请等待 ...") // "Please wait..."
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("等待") //"Wait for"
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("进料") //"filament load"
|
||||
#define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("等待") // "Wait for"
|
||||
#define MSG_FILAMENT_CHANGE_PURGE_2 _UxGT("丝料清除") // "filament purge"
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("等待打印") //"Wait for print"
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("恢复") //"to resume"
|
||||
#else // LCD_HEIGHT < 4
|
||||
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("请等待 ...") //"Please wait..."
|
||||
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("退出中 ...") //"Ejecting..."
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("插入并单击") //"Insert and Click"
|
||||
#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("加热中 ...") // "Heating..."
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("装载中 ...") //"Loading..."
|
||||
#define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("清除中 ...") // "Purging..."
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("恢复中 ...") //"Resuming..."
|
||||
#endif // LCD_HEIGHT < 4
|
||||
#if LCD_HEIGHT >= 4
|
||||
PROGMEM Language_Str MSG_FILAMENT_CHANGE_INIT = _UxGT(MSG_3_LINE("等待开始", "丝料", "变更")); // "Wait for start of the filament change"
|
||||
PROGMEM Language_Str MSG_FILAMENT_CHANGE_UNLOAD = _UxGT(MSG_2_LINE("等待", "卸下丝料")); // "Wait for filament unload"
|
||||
PROGMEM Language_Str MSG_FILAMENT_CHANGE_INSERT = _UxGT(MSG_3_LINE("插入丝料", "并按键", "来继续 ...")); // "Insert filament and press button to continue..."
|
||||
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEAT = _UxGT(MSG_2_LINE("按下按钮来", "加热喷嘴.")); // "Press button to heat nozzle."
|
||||
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEATING = _UxGT(MSG_2_LINE("加热喷嘴", "请等待 ...")); // "Heating nozzle Please wait..."
|
||||
PROGMEM Language_Str MSG_FILAMENT_CHANGE_LOAD = _UxGT(MSG_2_LINE("等待", "进料")); // "Wait for filament load"
|
||||
PROGMEM Language_Str MSG_FILAMENT_CHANGE_PURGE = _UxGT(MSG_2_LINE("等待", "丝料清除")); // "Wait for filament purge"
|
||||
PROGMEM Language_Str MSG_FILAMENT_CHANGE_RESUME = _UxGT(MSG_2_LINE("等待打印", "恢复")); // "Wait for print to resume"
|
||||
#else
|
||||
PROGMEM Language_Str MSG_FILAMENT_CHANGE_INIT = _UxGT(MSG_1_LINE("请等待 ...")); //"Please wait..."
|
||||
PROGMEM Language_Str MSG_FILAMENT_CHANGE_UNLOAD = _UxGT(MSG_1_LINE("退出中 ...")); //"Ejecting..."
|
||||
PROGMEM Language_Str MSG_FILAMENT_CHANGE_INSERT = _UxGT(MSG_1_LINE("插入并单击")); //"Insert and Click"
|
||||
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEATING = _UxGT(MSG_1_LINE("加热中 ...")); // "Heating..."
|
||||
PROGMEM Language_Str MSG_FILAMENT_CHANGE_LOAD = _UxGT(MSG_1_LINE("装载中 ...")); //"Loading..."
|
||||
PROGMEM Language_Str MSG_FILAMENT_CHANGE_PURGE = _UxGT(MSG_1_LINE("清除中 ...")); // "Purging..."
|
||||
PROGMEM Language_Str MSG_FILAMENT_CHANGE_RESUME = _UxGT(MSG_1_LINE("恢复中 ...")); //"Resuming..."
|
||||
#endif
|
||||
}
|
||||
|
||||
Reference in New Issue
Block a user