Multi-language support (#15453)
This commit is contained in:
Marcio Teixeira
committed by
Scott Lahteine
Scott Lahteine
parent
dc14d4a13c
commit
6a865a6146
@@ -32,252 +32,270 @@
|
||||
#define DISPLAY_CHARSET_ISO10646_1
|
||||
#define NOT_EXTENDED_ISO10646_1_5X7
|
||||
|
||||
#define WELCOME_MSG MACHINE_NAME _UxGT(" gereed.")
|
||||
#define MSG_BACK _UxGT("Terug")
|
||||
#define MSG_MEDIA_INSERTED _UxGT("Kaart ingestoken")
|
||||
#define MSG_MEDIA_REMOVED _UxGT("Kaart verwijderd")
|
||||
#define MSG_LCD_ENDSTOPS _UxGT("Endstops") // Max length 8 characters
|
||||
#define MSG_MAIN _UxGT("Hoofdmenu")
|
||||
#define MSG_AUTOSTART _UxGT("Autostart")
|
||||
#define MSG_DISABLE_STEPPERS _UxGT("Motoren uit")
|
||||
#define MSG_DEBUG_MENU _UxGT("Debug Menu") //accepted English terms
|
||||
#define MSG_PROGRESS_BAR_TEST _UxGT("Vooruitgang Test")
|
||||
#define MSG_AUTO_HOME _UxGT("Auto home")
|
||||
#define MSG_AUTO_HOME_X _UxGT("Home X")
|
||||
#define MSG_AUTO_HOME_Y _UxGT("Home Y")
|
||||
#define MSG_AUTO_HOME_Z _UxGT("Home Z")
|
||||
#define MSG_LEVEL_BED_HOMING _UxGT("Homing XYZ")
|
||||
#define MSG_LEVEL_BED_WAITING _UxGT("Klik voor begin")
|
||||
#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Volgende Plaats")
|
||||
#define MSG_LEVEL_BED_DONE _UxGT("Bed level kompl.")
|
||||
#define MSG_SET_HOME_OFFSETS _UxGT("Zet home offsets")
|
||||
#define MSG_HOME_OFFSETS_APPLIED _UxGT("H offset toegep.")
|
||||
#define MSG_SET_ORIGIN _UxGT("Nulpunt instellen")
|
||||
#define MSG_PREHEAT_1 _UxGT(PREHEAT_1_LABEL " voorverwarmen")
|
||||
#define MSG_PREHEAT_1_N _UxGT(PREHEAT_1_LABEL " voorverw. ")
|
||||
#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1_N _UxGT("aan")
|
||||
#define MSG_PREHEAT_1_END MSG_PREHEAT_1 _UxGT(" Einde")
|
||||
#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1_N _UxGT("Bed")
|
||||
#define MSG_PREHEAT_1_SETTINGS _UxGT(PREHEAT_1_LABEL " verw. conf")
|
||||
#define MSG_PREHEAT_2 _UxGT(PREHEAT_2_LABEL " voorverwarmen")
|
||||
#define MSG_PREHEAT_2_N _UxGT(PREHEAT_2_LABEL " voorverw. ")
|
||||
#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2_N _UxGT("aan")
|
||||
#define MSG_PREHEAT_2_END MSG_PREHEAT_2 _UxGT(" Einde")
|
||||
#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2_N _UxGT("Bed")
|
||||
#define MSG_PREHEAT_2_SETTINGS _UxGT(PREHEAT_2_LABEL " verw. conf")
|
||||
#define MSG_COOLDOWN _UxGT("Afkoelen")
|
||||
#define MSG_SWITCH_PS_ON _UxGT("Stroom aan")
|
||||
#define MSG_SWITCH_PS_OFF _UxGT("Stroom uit")
|
||||
#define MSG_EXTRUDE _UxGT("Extrude")
|
||||
#define MSG_RETRACT _UxGT("Retract")
|
||||
#define MSG_MOVE_AXIS _UxGT("As verplaatsen")
|
||||
#define MSG_BED_LEVELING _UxGT("Bed Leveling")
|
||||
#define MSG_LEVEL_BED _UxGT("Level bed")
|
||||
namespace Language_nl {
|
||||
using namespace Language_en; // Inherit undefined strings from English
|
||||
|
||||
#define MSG_MOVING _UxGT("Verplaatsen...")
|
||||
#define MSG_FREE_XY _UxGT("Vrij XY")
|
||||
#define MSG_MOVE_X _UxGT("Verplaats X")
|
||||
#define MSG_MOVE_Y _UxGT("Verplaats Y")
|
||||
#define MSG_MOVE_Z _UxGT("Verplaats Z")
|
||||
#define MSG_MOVE_E _UxGT("Extruder")
|
||||
#define MSG_MOVE_Z_DIST _UxGT("Verplaats %smm")
|
||||
#define MSG_MOVE_01MM _UxGT("Verplaats 0.1mm")
|
||||
#define MSG_MOVE_1MM _UxGT("Verplaats 1mm")
|
||||
#define MSG_MOVE_10MM _UxGT("Verplaats 10mm")
|
||||
#define MSG_SPEED _UxGT("Snelheid")
|
||||
#define MSG_BED_Z _UxGT("Bed Z")
|
||||
#define MSG_NOZZLE _UxGT("Nozzle")
|
||||
#define MSG_BED _UxGT("Bed")
|
||||
#define MSG_FAN_SPEED _UxGT("Fan snelheid")
|
||||
#define MSG_FLOW _UxGT("Flow")
|
||||
#define MSG_CONTROL _UxGT("Control")
|
||||
#define MSG_MIN _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Min")
|
||||
#define MSG_MAX _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Max")
|
||||
#define MSG_FACTOR _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Fact")
|
||||
#define MSG_AUTOTEMP _UxGT("Autotemp")
|
||||
#define MSG_LCD_ON _UxGT("Aan")
|
||||
#define MSG_LCD_OFF _UxGT("Uit")
|
||||
#define MSG_PID_P _UxGT("PID-P")
|
||||
#define MSG_PID_I _UxGT("PID-I")
|
||||
#define MSG_PID_D _UxGT("PID-D")
|
||||
#define MSG_PID_C _UxGT("PID-C")
|
||||
#define MSG_SELECT _UxGT("Selecteer")
|
||||
#define MSG_ACC _UxGT("Versn")
|
||||
#define MSG_JERK _UxGT("Jerk")
|
||||
#if IS_KINEMATIC
|
||||
#define MSG_VA_JERK _UxGT("Va-jerk")
|
||||
#define MSG_VB_JERK _UxGT("Vb-jerk")
|
||||
#define MSG_VC_JERK _UxGT("Vc-jerk")
|
||||
#else
|
||||
#define MSG_VA_JERK _UxGT("Vx-jerk")
|
||||
#define MSG_VB_JERK _UxGT("Vy-jerk")
|
||||
#define MSG_VC_JERK _UxGT("Vz-jerk")
|
||||
#endif
|
||||
#define MSG_VE_JERK _UxGT("Ve-jerk")
|
||||
#define MSG_VMAX _UxGT("Vmax ")
|
||||
#define MSG_VMIN _UxGT("Vmin")
|
||||
#define MSG_VTRAV_MIN _UxGT("VTrav min")
|
||||
#define MSG_AMAX _UxGT("Amax ")
|
||||
#define MSG_A_RETRACT _UxGT("A-retract")
|
||||
#define MSG_A_TRAVEL _UxGT("A-travel")
|
||||
#define MSG_STEPS_PER_MM _UxGT("Steps/mm")
|
||||
#if IS_KINEMATIC
|
||||
#define MSG_ASTEPS _UxGT("Asteps/mm")
|
||||
#define MSG_BSTEPS _UxGT("Bsteps/mm")
|
||||
#define MSG_CSTEPS _UxGT("Csteps/mm")
|
||||
#else
|
||||
#define MSG_ASTEPS _UxGT("Xsteps/mm")
|
||||
#define MSG_BSTEPS _UxGT("Ysteps/mm")
|
||||
#define MSG_CSTEPS _UxGT("Zsteps/mm")
|
||||
#endif
|
||||
#define MSG_ESTEPS _UxGT("Esteps/mm")
|
||||
#define MSG_E0_STEPS _UxGT("E1steps/mm")
|
||||
#define MSG_E1_STEPS _UxGT("E2steps/mm")
|
||||
#define MSG_E2_STEPS _UxGT("E3steps/mm")
|
||||
#define MSG_E3_STEPS _UxGT("E4steps/mm")
|
||||
#define MSG_E4_STEPS _UxGT("E5steps/mm")
|
||||
#define MSG_E5_STEPS _UxGT("E6steps/mm")
|
||||
#define MSG_TEMPERATURE _UxGT("Temperatuur")
|
||||
#define MSG_MOTION _UxGT("Beweging")
|
||||
#define MSG_FILAMENT _UxGT("Filament")
|
||||
#define MSG_ADVANCE_K _UxGT("Advance K") //accepted english dutch
|
||||
#define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3")
|
||||
#define MSG_FILAMENT_DIAM _UxGT("Fil. Dia.")
|
||||
#define MSG_CONTRAST _UxGT("LCD contrast")
|
||||
#define MSG_STORE_EEPROM _UxGT("Geheugen opslaan")
|
||||
#define MSG_LOAD_EEPROM _UxGT("Geheugen laden")
|
||||
#define MSG_RESTORE_FAILSAFE _UxGT("Noodstop reset")
|
||||
#define MSG_REFRESH _UxGT("Ververs")
|
||||
#define MSG_WATCH _UxGT("Info scherm")
|
||||
#define MSG_PREPARE _UxGT("Voorbereiden")
|
||||
#define MSG_TUNE _UxGT("Afstellen")
|
||||
#define MSG_PAUSE_PRINT _UxGT("Print pauzeren")
|
||||
#define MSG_RESUME_PRINT _UxGT("Print hervatten")
|
||||
#define MSG_STOP_PRINT _UxGT("Print stoppen")
|
||||
#define MSG_MEDIA_MENU _UxGT("Print van SD")
|
||||
#define MSG_NO_MEDIA _UxGT("Geen SD kaart")
|
||||
#define MSG_DWELL _UxGT("Slapen...")
|
||||
#define MSG_USERWAIT _UxGT("Wachten...")
|
||||
#define MSG_PRINT_ABORTED _UxGT("Print afgebroken")
|
||||
#define MSG_NO_MOVE _UxGT("Geen beweging.")
|
||||
#define MSG_KILLED _UxGT("Afgebroken. ")
|
||||
#define MSG_STOPPED _UxGT("Gestopt. ")
|
||||
#define MSG_CONTROL_RETRACT _UxGT("Retract mm") //accepted English term in Dutch
|
||||
#define MSG_CONTROL_RETRACT_SWAP _UxGT("Ruil Retract mm")
|
||||
#define MSG_CONTROL_RETRACTF _UxGT("Retract F")
|
||||
#define MSG_CONTROL_RETRACT_ZHOP _UxGT("Hop mm")
|
||||
#define MSG_CONTROL_RETRACT_RECOVER _UxGT("UnRet mm")
|
||||
#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Ruil UnRet mm")
|
||||
#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet F")
|
||||
#define MSG_AUTORETRACT _UxGT("AutoRetr.")
|
||||
#define MSG_FILAMENTCHANGE _UxGT("Verv. Filament")
|
||||
#define MSG_INIT_MEDIA _UxGT("Init. SD kaart")
|
||||
#define MSG_CHANGE_MEDIA _UxGT("Verv. SD Kaart")
|
||||
#define MSG_ZPROBE_OUT _UxGT("Z probe uit. bed")
|
||||
#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Zelf-Test")
|
||||
#define MSG_BLTOUCH_RESET _UxGT("Reset BLTouch")
|
||||
#define MSG_HOME_FIRST _UxGT("Home %s%s%s Eerst")
|
||||
#define MSG_ZPROBE_ZOFFSET _UxGT("Z Offset") //accepted English term in Dutch
|
||||
#define MSG_BABYSTEP_X _UxGT("Babystap X")
|
||||
#define MSG_BABYSTEP_Y _UxGT("Babystap Y")
|
||||
#define MSG_BABYSTEP_Z _UxGT("Babystap Z")
|
||||
#define MSG_ENDSTOP_ABORT _UxGT("Endstop afbr.")
|
||||
#define MSG_HEATING_FAILED_LCD _UxGT("Voorverw. fout")
|
||||
#define MSG_ERR_REDUNDANT_TEMP _UxGT("Redun. temp fout")
|
||||
#define MSG_THERMAL_RUNAWAY _UxGT("Therm. wegloop")
|
||||
#define MSG_ERR_MAXTEMP _UxGT("Err: Max. temp")
|
||||
#define MSG_ERR_MINTEMP _UxGT("Err: Min. temp")
|
||||
#define MSG_ERR_MAXTEMP_BED _UxGT("Err: Max.tmp bed")
|
||||
#define MSG_ERR_MINTEMP_BED _UxGT("Err: Min.tmp bed")
|
||||
#define MSG_ERR_Z_HOMING _UxGT("Home XY Eerst")
|
||||
#define MSG_HALTED _UxGT("PRINTER GESTOPT")
|
||||
#define MSG_PLEASE_RESET _UxGT("Reset A.U.B.")
|
||||
#define MSG_SHORT_DAY _UxGT("d") // One character only. Keep English standard
|
||||
#define MSG_SHORT_HOUR _UxGT("h") // One character only
|
||||
#define MSG_SHORT_MINUTE _UxGT("m") // One character only
|
||||
#define MSG_HEATING _UxGT("Voorwarmen...")
|
||||
#define MSG_BED_HEATING _UxGT("Bed voorverw...")
|
||||
#define MSG_DELTA_CALIBRATE _UxGT("Delta Calibratie")
|
||||
#define MSG_DELTA_CALIBRATE_X _UxGT("Kalibreer X")
|
||||
#define MSG_DELTA_CALIBRATE_Y _UxGT("Kalibreer Y")
|
||||
#define MSG_DELTA_CALIBRATE_Z _UxGT("Kalibreer Z")
|
||||
#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Kalibreer Midden")
|
||||
#define MSG_DELTA_AUTO_CALIBRATE _UxGT("Auto Calibratie")
|
||||
#define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Zet Delta Hoogte")
|
||||
constexpr uint8_t CHARSIZE = 1;
|
||||
PROGMEM Language_Str LANGUAGE = _UxGT("Dutch");
|
||||
|
||||
#define MSG_INFO_STATS_MENU _UxGT("Printer Stats")
|
||||
#define MSG_INFO_BOARD_MENU _UxGT("Board Info") //accepted English term in Dutch
|
||||
#define MSG_INFO_THERMISTOR_MENU _UxGT("Thermistors")
|
||||
#define MSG_INFO_EXTRUDERS _UxGT("Extruders")
|
||||
#define MSG_INFO_BAUDRATE _UxGT("Baud")
|
||||
#define MSG_INFO_MENU _UxGT("Over Printer")
|
||||
#define MSG_INFO_PRINTER_MENU _UxGT("Printer Info")
|
||||
#define MSG_INFO_PROTOCOL _UxGT("Protocol")
|
||||
#define MSG_CASE_LIGHT _UxGT("Case licht")
|
||||
PROGMEM Language_Str WELCOME_MSG = MACHINE_NAME _UxGT(" gereed.");
|
||||
PROGMEM Language_Str MSG_BACK = _UxGT("Terug");
|
||||
PROGMEM Language_Str MSG_MEDIA_INSERTED = _UxGT("Kaart ingestoken");
|
||||
PROGMEM Language_Str MSG_MEDIA_REMOVED = _UxGT("Kaart verwijderd");
|
||||
PROGMEM Language_Str MSG_LCD_ENDSTOPS = _UxGT("Endstops"); // Max length 8 characters
|
||||
PROGMEM Language_Str MSG_MAIN = _UxGT("Hoofdmenu");
|
||||
PROGMEM Language_Str MSG_AUTOSTART = _UxGT("Autostart");
|
||||
PROGMEM Language_Str MSG_DISABLE_STEPPERS = _UxGT("Motoren uit");
|
||||
PROGMEM Language_Str MSG_DEBUG_MENU = _UxGT("Debug Menu"); //accepted English terms
|
||||
PROGMEM Language_Str MSG_PROGRESS_BAR_TEST = _UxGT("Vooruitgang Test");
|
||||
PROGMEM Language_Str MSG_AUTO_HOME = _UxGT("Auto home");
|
||||
PROGMEM Language_Str MSG_AUTO_HOME_X = _UxGT("Home X");
|
||||
PROGMEM Language_Str MSG_AUTO_HOME_Y = _UxGT("Home Y");
|
||||
PROGMEM Language_Str MSG_AUTO_HOME_Z = _UxGT("Home Z");
|
||||
PROGMEM Language_Str MSG_LEVEL_BED_HOMING = _UxGT("Homing XYZ");
|
||||
PROGMEM Language_Str MSG_LEVEL_BED_WAITING = _UxGT("Klik voor begin");
|
||||
PROGMEM Language_Str MSG_LEVEL_BED_NEXT_POINT = _UxGT("Volgende Plaats");
|
||||
PROGMEM Language_Str MSG_LEVEL_BED_DONE = _UxGT("Bed level kompl.");
|
||||
PROGMEM Language_Str MSG_SET_HOME_OFFSETS = _UxGT("Zet home offsets");
|
||||
PROGMEM Language_Str MSG_HOME_OFFSETS_APPLIED = _UxGT("H offset toegep.");
|
||||
PROGMEM Language_Str MSG_SET_ORIGIN = _UxGT("Nulpunt instellen");
|
||||
PROGMEM Language_Str MSG_PREHEAT_1 = PREHEAT_1_LABEL _UxGT(" voorverwarmen");
|
||||
PROGMEM Language_Str MSG_PREHEAT_1_H0 = PREHEAT_1_LABEL _UxGT(" voorverw. ") LCD_STR_N0;
|
||||
PROGMEM Language_Str MSG_PREHEAT_1_H1 = PREHEAT_1_LABEL _UxGT(" voorverw. ") LCD_STR_N1;
|
||||
PROGMEM Language_Str MSG_PREHEAT_1_H2 = PREHEAT_1_LABEL _UxGT(" voorverw. ") LCD_STR_N2;
|
||||
PROGMEM Language_Str MSG_PREHEAT_1_H3 = PREHEAT_1_LABEL _UxGT(" voorverw. ") LCD_STR_N3;
|
||||
PROGMEM Language_Str MSG_PREHEAT_1_H4 = PREHEAT_1_LABEL _UxGT(" voorverw. ") LCD_STR_N4;
|
||||
PROGMEM Language_Str MSG_PREHEAT_1_H5 = PREHEAT_1_LABEL _UxGT(" voorverw. ") LCD_STR_N5;
|
||||
PROGMEM Language_Str MSG_PREHEAT_1_END = PREHEAT_1_LABEL _UxGT(" voorverw. Einde");
|
||||
PROGMEM Language_Str MSG_PREHEAT_1_END_E0 = PREHEAT_1_LABEL _UxGT(" voorverw. Einde ") LCD_STR_N0;
|
||||
PROGMEM Language_Str MSG_PREHEAT_1_END_E1 = PREHEAT_1_LABEL _UxGT(" voorverw. Einde ") LCD_STR_N1;
|
||||
PROGMEM Language_Str MSG_PREHEAT_1_END_E2 = PREHEAT_1_LABEL _UxGT(" voorverw. Einde ") LCD_STR_N2;
|
||||
PROGMEM Language_Str MSG_PREHEAT_1_END_E3 = PREHEAT_1_LABEL _UxGT(" voorverw. Einde ") LCD_STR_N3;
|
||||
PROGMEM Language_Str MSG_PREHEAT_1_END_E4 = PREHEAT_1_LABEL _UxGT(" voorverw. Einde ") LCD_STR_N4;
|
||||
PROGMEM Language_Str MSG_PREHEAT_1_END_E5 = PREHEAT_1_LABEL _UxGT(" voorverw. Einde ") LCD_STR_N5;
|
||||
PROGMEM Language_Str MSG_PREHEAT_1_ALL = PREHEAT_1_LABEL _UxGT(" voorverw. aan");
|
||||
PROGMEM Language_Str MSG_PREHEAT_1_BEDONLY = PREHEAT_1_LABEL _UxGT(" voorverw. Bed");
|
||||
PROGMEM Language_Str MSG_PREHEAT_1_SETTINGS = PREHEAT_1_LABEL _UxGT(" verw. conf");
|
||||
PROGMEM Language_Str MSG_PREHEAT_2 = PREHEAT_2_LABEL _UxGT(" voorverwarmen");
|
||||
PROGMEM Language_Str MSG_PREHEAT_2_H0 = PREHEAT_2_LABEL _UxGT(" voorverw. ") LCD_STR_N0;
|
||||
PROGMEM Language_Str MSG_PREHEAT_2_H1 = PREHEAT_2_LABEL _UxGT(" voorverw. ") LCD_STR_N1;
|
||||
PROGMEM Language_Str MSG_PREHEAT_2_H2 = PREHEAT_2_LABEL _UxGT(" voorverw. ") LCD_STR_N2;
|
||||
PROGMEM Language_Str MSG_PREHEAT_2_H3 = PREHEAT_2_LABEL _UxGT(" voorverw. ") LCD_STR_N3;
|
||||
PROGMEM Language_Str MSG_PREHEAT_2_H4 = PREHEAT_2_LABEL _UxGT(" voorverw. ") LCD_STR_N4;
|
||||
PROGMEM Language_Str MSG_PREHEAT_2_H5 = PREHEAT_2_LABEL _UxGT(" voorverw. ") LCD_STR_N5;
|
||||
PROGMEM Language_Str MSG_PREHEAT_2_END = PREHEAT_2_LABEL _UxGT(" voorverw. Einde");
|
||||
PROGMEM Language_Str MSG_PREHEAT_2_END_E0 = PREHEAT_2_LABEL _UxGT(" voorverw. Einde ") LCD_STR_N0;
|
||||
PROGMEM Language_Str MSG_PREHEAT_2_END_E1 = PREHEAT_2_LABEL _UxGT(" voorverw. Einde ") LCD_STR_N1;
|
||||
PROGMEM Language_Str MSG_PREHEAT_2_END_E2 = PREHEAT_2_LABEL _UxGT(" voorverw. Einde ") LCD_STR_N2;
|
||||
PROGMEM Language_Str MSG_PREHEAT_2_END_E3 = PREHEAT_2_LABEL _UxGT(" voorverw. Einde ") LCD_STR_N3;
|
||||
PROGMEM Language_Str MSG_PREHEAT_2_END_E4 = PREHEAT_2_LABEL _UxGT(" voorverw. Einde ") LCD_STR_N4;
|
||||
PROGMEM Language_Str MSG_PREHEAT_2_END_E5 = PREHEAT_2_LABEL _UxGT(" voorverw. Einde ") LCD_STR_N5;
|
||||
PROGMEM Language_Str MSG_PREHEAT_2_ALL = PREHEAT_2_LABEL _UxGT(" voorverw. aan");
|
||||
PROGMEM Language_Str MSG_PREHEAT_2_BEDONLY = PREHEAT_2_LABEL _UxGT(" voorverw. Bed");
|
||||
PROGMEM Language_Str MSG_PREHEAT_2_SETTINGS = PREHEAT_2_LABEL _UxGT(" verw. conf");
|
||||
PROGMEM Language_Str MSG_COOLDOWN = _UxGT("Afkoelen");
|
||||
PROGMEM Language_Str MSG_SWITCH_PS_ON = _UxGT("Stroom aan");
|
||||
PROGMEM Language_Str MSG_SWITCH_PS_OFF = _UxGT("Stroom uit");
|
||||
PROGMEM Language_Str MSG_EXTRUDE = _UxGT("Extrude");
|
||||
PROGMEM Language_Str MSG_RETRACT = _UxGT("Retract");
|
||||
PROGMEM Language_Str MSG_MOVE_AXIS = _UxGT("As verplaatsen");
|
||||
PROGMEM Language_Str MSG_BED_LEVELING = _UxGT("Bed Leveling");
|
||||
PROGMEM Language_Str MSG_LEVEL_BED = _UxGT("Level bed");
|
||||
|
||||
#define MSG_EXPECTED_PRINTER _UxGT("Onjuiste printer")
|
||||
PROGMEM Language_Str MSG_MOVING = _UxGT("Verplaatsen...");
|
||||
PROGMEM Language_Str MSG_FREE_XY = _UxGT("Vrij XY");
|
||||
PROGMEM Language_Str MSG_MOVE_X = _UxGT("Verplaats X");
|
||||
PROGMEM Language_Str MSG_MOVE_Y = _UxGT("Verplaats Y");
|
||||
PROGMEM Language_Str MSG_MOVE_Z = _UxGT("Verplaats Z");
|
||||
PROGMEM Language_Str MSG_MOVE_E = _UxGT("Extruder");
|
||||
PROGMEM Language_Str MSG_MOVE_E0 = _UxGT("Extruder ") LCD_STR_E0;
|
||||
PROGMEM Language_Str MSG_MOVE_E1 = _UxGT("Extruder ") LCD_STR_E1;
|
||||
PROGMEM Language_Str MSG_MOVE_E2 = _UxGT("Extruder ") LCD_STR_E2;
|
||||
PROGMEM Language_Str MSG_MOVE_E3 = _UxGT("Extruder ") LCD_STR_E3;
|
||||
PROGMEM Language_Str MSG_MOVE_E4 = _UxGT("Extruder ") LCD_STR_E4;
|
||||
PROGMEM Language_Str MSG_MOVE_E5 = _UxGT("Extruder ") LCD_STR_E5;
|
||||
PROGMEM Language_Str MSG_MOVE_Z_DIST = _UxGT("Verplaats %smm");
|
||||
PROGMEM Language_Str MSG_MOVE_01MM = _UxGT("Verplaats 0.1mm");
|
||||
PROGMEM Language_Str MSG_MOVE_1MM = _UxGT("Verplaats 1mm");
|
||||
PROGMEM Language_Str MSG_MOVE_10MM = _UxGT("Verplaats 10mm");
|
||||
PROGMEM Language_Str MSG_SPEED = _UxGT("Snelheid");
|
||||
PROGMEM Language_Str MSG_BED_Z = _UxGT("Bed Z");
|
||||
PROGMEM Language_Str MSG_NOZZLE = _UxGT("Nozzle");
|
||||
PROGMEM Language_Str MSG_NOZZLE_0 = _UxGT("Nozzle ") LCD_STR_N0;
|
||||
PROGMEM Language_Str MSG_NOZZLE_1 = _UxGT("Nozzle ") LCD_STR_N1;
|
||||
PROGMEM Language_Str MSG_NOZZLE_2 = _UxGT("Nozzle ") LCD_STR_N2;
|
||||
PROGMEM Language_Str MSG_NOZZLE_3 = _UxGT("Nozzle ") LCD_STR_N3;
|
||||
PROGMEM Language_Str MSG_NOZZLE_4 = _UxGT("Nozzle ") LCD_STR_N4;
|
||||
PROGMEM Language_Str MSG_NOZZLE_5 = _UxGT("Nozzle ") LCD_STR_N5;
|
||||
PROGMEM Language_Str MSG_BED = _UxGT("Bed");
|
||||
PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("Fan snelheid");
|
||||
PROGMEM Language_Str MSG_FAN_SPEED_1 = _UxGT("Fan snelheid 1");
|
||||
PROGMEM Language_Str MSG_FAN_SPEED_2 = _UxGT("Fan snelheid 2");
|
||||
PROGMEM Language_Str MSG_FAN_SPEED_3 = _UxGT("Fan snelheid 3");
|
||||
PROGMEM Language_Str MSG_FLOW = _UxGT("Flow");
|
||||
PROGMEM Language_Str MSG_FLOW_0 = _UxGT("Flow ") LCD_STR_N0;
|
||||
PROGMEM Language_Str MSG_FLOW_1 = _UxGT("Flow ") LCD_STR_N1;
|
||||
PROGMEM Language_Str MSG_FLOW_2 = _UxGT("Flow ") LCD_STR_N2;
|
||||
PROGMEM Language_Str MSG_FLOW_3 = _UxGT("Flow ") LCD_STR_N3;
|
||||
PROGMEM Language_Str MSG_FLOW_4 = _UxGT("Flow ") LCD_STR_N4;
|
||||
PROGMEM Language_Str MSG_FLOW_5 = _UxGT("Flow ") LCD_STR_N5;
|
||||
PROGMEM Language_Str MSG_CONTROL = _UxGT("Control");
|
||||
PROGMEM Language_Str MSG_MIN = " " LCD_STR_THERMOMETER _UxGT(" Min");
|
||||
PROGMEM Language_Str MSG_MAX = " " LCD_STR_THERMOMETER _UxGT(" Max");
|
||||
PROGMEM Language_Str MSG_FACTOR = " " LCD_STR_THERMOMETER _UxGT(" Fact");
|
||||
PROGMEM Language_Str MSG_AUTOTEMP = _UxGT("Autotemp");
|
||||
PROGMEM Language_Str MSG_LCD_ON = _UxGT("Aan");
|
||||
PROGMEM Language_Str MSG_LCD_OFF = _UxGT("Uit");
|
||||
PROGMEM Language_Str MSG_SELECT = _UxGT("Selecteer");
|
||||
PROGMEM Language_Str MSG_SELECT_E0 = _UxGT("Selecteer ") LCD_STR_E0;
|
||||
PROGMEM Language_Str MSG_SELECT_E1 = _UxGT("Selecteer ") LCD_STR_E1;
|
||||
PROGMEM Language_Str MSG_SELECT_E2 = _UxGT("Selecteer ") LCD_STR_E2;
|
||||
PROGMEM Language_Str MSG_SELECT_E3 = _UxGT("Selecteer ") LCD_STR_E3;
|
||||
PROGMEM Language_Str MSG_SELECT_E4 = _UxGT("Selecteer ") LCD_STR_E4;
|
||||
PROGMEM Language_Str MSG_SELECT_E5 = _UxGT("Selecteer ") LCD_STR_E5;
|
||||
PROGMEM Language_Str MSG_ACC = _UxGT("Versn");
|
||||
PROGMEM Language_Str MSG_TEMPERATURE = _UxGT("Temperatuur");
|
||||
PROGMEM Language_Str MSG_MOTION = _UxGT("Beweging");
|
||||
PROGMEM Language_Str MSG_FILAMENT = _UxGT("Filament");
|
||||
PROGMEM Language_Str MSG_ADVANCE_K = _UxGT("Advance K"); //accepted english dutch
|
||||
PROGMEM Language_Str MSG_ADVANCE_K_E0 = _UxGT("Advance K ") LCD_STR_E0; //accepted english dutch
|
||||
PROGMEM Language_Str MSG_ADVANCE_K_E1 = _UxGT("Advance K ") LCD_STR_E1; //accepted english dutch
|
||||
PROGMEM Language_Str MSG_ADVANCE_K_E2 = _UxGT("Advance K ") LCD_STR_E2; //accepted english dutch
|
||||
PROGMEM Language_Str MSG_ADVANCE_K_E3 = _UxGT("Advance K ") LCD_STR_E3; //accepted english dutch
|
||||
PROGMEM Language_Str MSG_ADVANCE_K_E4 = _UxGT("Advance K ") LCD_STR_E4; //accepted english dutch
|
||||
PROGMEM Language_Str MSG_ADVANCE_K_E5 = _UxGT("Advance K ") LCD_STR_E5; //accepted english dutch
|
||||
PROGMEM Language_Str MSG_VOLUMETRIC_ENABLED = _UxGT("E in mm3");
|
||||
PROGMEM Language_Str MSG_FILAMENT_DIAM = _UxGT("Fil. Dia.");
|
||||
PROGMEM Language_Str MSG_FILAMENT_DIAM_E0 = _UxGT("Fil. Dia. ") LCD_STR_E0;
|
||||
PROGMEM Language_Str MSG_FILAMENT_DIAM_E1 = _UxGT("Fil. Dia. ") LCD_STR_E1;
|
||||
PROGMEM Language_Str MSG_FILAMENT_DIAM_E2 = _UxGT("Fil. Dia. ") LCD_STR_E2;
|
||||
PROGMEM Language_Str MSG_FILAMENT_DIAM_E3 = _UxGT("Fil. Dia. ") LCD_STR_E3;
|
||||
PROGMEM Language_Str MSG_FILAMENT_DIAM_E4 = _UxGT("Fil. Dia. ") LCD_STR_E4;
|
||||
PROGMEM Language_Str MSG_FILAMENT_DIAM_E5 = _UxGT("Fil. Dia. ") LCD_STR_E5;
|
||||
PROGMEM Language_Str MSG_CONTRAST = _UxGT("LCD contrast");
|
||||
PROGMEM Language_Str MSG_STORE_EEPROM = _UxGT("Geheugen opslaan");
|
||||
PROGMEM Language_Str MSG_LOAD_EEPROM = _UxGT("Geheugen laden");
|
||||
PROGMEM Language_Str MSG_RESTORE_FAILSAFE = _UxGT("Noodstop reset");
|
||||
PROGMEM Language_Str MSG_REFRESH = LCD_STR_REFRESH _UxGT("Ververs");
|
||||
PROGMEM Language_Str MSG_WATCH = _UxGT("Info scherm");
|
||||
PROGMEM Language_Str MSG_PREPARE = _UxGT("Voorbereiden");
|
||||
PROGMEM Language_Str MSG_TUNE = _UxGT("Afstellen");
|
||||
PROGMEM Language_Str MSG_PAUSE_PRINT = _UxGT("Print pauzeren");
|
||||
PROGMEM Language_Str MSG_RESUME_PRINT = _UxGT("Print hervatten");
|
||||
PROGMEM Language_Str MSG_STOP_PRINT = _UxGT("Print stoppen");
|
||||
PROGMEM Language_Str MSG_MEDIA_MENU = _UxGT("Print van SD");
|
||||
PROGMEM Language_Str MSG_NO_MEDIA = _UxGT("Geen SD kaart");
|
||||
PROGMEM Language_Str MSG_DWELL = _UxGT("Slapen...");
|
||||
PROGMEM Language_Str MSG_USERWAIT = _UxGT("Wachten...");
|
||||
PROGMEM Language_Str MSG_PRINT_ABORTED = _UxGT("Print afgebroken");
|
||||
PROGMEM Language_Str MSG_NO_MOVE = _UxGT("Geen beweging.");
|
||||
PROGMEM Language_Str MSG_KILLED = _UxGT("Afgebroken. ");
|
||||
PROGMEM Language_Str MSG_STOPPED = _UxGT("Gestopt. ");
|
||||
PROGMEM Language_Str MSG_CONTROL_RETRACT = _UxGT("Retract mm"); //accepted English term in Dutch
|
||||
PROGMEM Language_Str MSG_CONTROL_RETRACT_SWAP = _UxGT("Ruil Retract mm");
|
||||
PROGMEM Language_Str MSG_CONTROL_RETRACTF = _UxGT("Retract F");
|
||||
PROGMEM Language_Str MSG_CONTROL_RETRACT_ZHOP = _UxGT("Hop mm");
|
||||
PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVER = _UxGT("UnRet mm");
|
||||
PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVER_SWAP = _UxGT("Ruil UnRet mm");
|
||||
PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVERF = _UxGT("UnRet F");
|
||||
PROGMEM Language_Str MSG_AUTORETRACT = _UxGT("AutoRetr.");
|
||||
PROGMEM Language_Str MSG_FILAMENTCHANGE = _UxGT("Verv. Filament");
|
||||
PROGMEM Language_Str MSG_FILAMENTCHANGE_E0 = _UxGT("Verv. Filament ") LCD_STR_E0;
|
||||
PROGMEM Language_Str MSG_FILAMENTCHANGE_E1 = _UxGT("Verv. Filament ") LCD_STR_E1;
|
||||
PROGMEM Language_Str MSG_FILAMENTCHANGE_E2 = _UxGT("Verv. Filament ") LCD_STR_E2;
|
||||
PROGMEM Language_Str MSG_FILAMENTCHANGE_E3 = _UxGT("Verv. Filament ") LCD_STR_E3;
|
||||
PROGMEM Language_Str MSG_FILAMENTCHANGE_E4 = _UxGT("Verv. Filament ") LCD_STR_E4;
|
||||
PROGMEM Language_Str MSG_FILAMENTCHANGE_E5 = _UxGT("Verv. Filament ") LCD_STR_E5;
|
||||
PROGMEM Language_Str MSG_INIT_MEDIA = _UxGT("Init. SD kaart");
|
||||
PROGMEM Language_Str MSG_CHANGE_MEDIA = _UxGT("Verv. SD Kaart");
|
||||
PROGMEM Language_Str MSG_ZPROBE_OUT = _UxGT("Z probe uit. bed");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_SELFTEST = _UxGT("BLTouch Zelf-Test");
|
||||
PROGMEM Language_Str MSG_BLTOUCH_RESET = _UxGT("Reset BLTouch");
|
||||
PROGMEM Language_Str MSG_HOME_FIRST = _UxGT("Home %s%s%s Eerst");
|
||||
PROGMEM Language_Str MSG_ZPROBE_ZOFFSET = _UxGT("Z Offset"); //accepted English term in Dutch
|
||||
PROGMEM Language_Str MSG_BABYSTEP_X = _UxGT("Babystap X");
|
||||
PROGMEM Language_Str MSG_BABYSTEP_Y = _UxGT("Babystap Y");
|
||||
PROGMEM Language_Str MSG_BABYSTEP_Z = _UxGT("Babystap Z");
|
||||
PROGMEM Language_Str MSG_ENDSTOP_ABORT = _UxGT("Endstop afbr.");
|
||||
PROGMEM Language_Str MSG_HEATING_FAILED_LCD = _UxGT("Voorverw. fout");
|
||||
PROGMEM Language_Str MSG_ERR_REDUNDANT_TEMP = _UxGT("Redun. temp fout");
|
||||
PROGMEM Language_Str MSG_THERMAL_RUNAWAY = _UxGT("Therm. wegloop");
|
||||
PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("Err: Max. temp");
|
||||
PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("Err: Min. temp");
|
||||
PROGMEM Language_Str MSG_ERR_MAXTEMP_BED = _UxGT("Err: Max.tmp bed");
|
||||
PROGMEM Language_Str MSG_ERR_MINTEMP_BED = _UxGT("Err: Min.tmp bed");
|
||||
PROGMEM Language_Str MSG_ERR_Z_HOMING = _UxGT("Home XY Eerst");
|
||||
PROGMEM Language_Str MSG_HALTED = _UxGT("PRINTER GESTOPT");
|
||||
PROGMEM Language_Str MSG_PLEASE_RESET = _UxGT("Reset A.U.B.");
|
||||
PROGMEM Language_Str MSG_SHORT_DAY = _UxGT("d"); // One character only. Keep English standard
|
||||
PROGMEM Language_Str MSG_SHORT_HOUR = _UxGT("h"); // One character only
|
||||
PROGMEM Language_Str MSG_SHORT_MINUTE = _UxGT("m"); // One character only
|
||||
PROGMEM Language_Str MSG_HEATING = _UxGT("Voorwarmen...");
|
||||
PROGMEM Language_Str MSG_BED_HEATING = _UxGT("Bed voorverw...");
|
||||
PROGMEM Language_Str MSG_DELTA_CALIBRATE = _UxGT("Delta Calibratie");
|
||||
PROGMEM Language_Str MSG_DELTA_CALIBRATE_X = _UxGT("Kalibreer X");
|
||||
PROGMEM Language_Str MSG_DELTA_CALIBRATE_Y = _UxGT("Kalibreer Y");
|
||||
PROGMEM Language_Str MSG_DELTA_CALIBRATE_Z = _UxGT("Kalibreer Z");
|
||||
PROGMEM Language_Str MSG_DELTA_CALIBRATE_CENTER = _UxGT("Kalibreer Midden");
|
||||
PROGMEM Language_Str MSG_DELTA_AUTO_CALIBRATE = _UxGT("Auto Calibratie");
|
||||
PROGMEM Language_Str MSG_DELTA_HEIGHT_CALIBRATE = _UxGT("Zet Delta Hoogte");
|
||||
|
||||
#if LCD_WIDTH >= 20
|
||||
#define MSG_INFO_PRINT_COUNT _UxGT("Printed Aantal")
|
||||
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Totaal Voltooid")
|
||||
#define MSG_INFO_PRINT_TIME _UxGT("Totale Printtijd")
|
||||
#define MSG_INFO_PRINT_LONGEST _UxGT("Langste Printtijd")
|
||||
#define MSG_INFO_PRINT_FILAMENT _UxGT("Totaal Extrudeert")
|
||||
#else
|
||||
#define MSG_INFO_PRINT_COUNT _UxGT("Aantal")
|
||||
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Voltooid")
|
||||
#define MSG_INFO_PRINT_TIME _UxGT("Printtijd ")
|
||||
#define MSG_INFO_PRINT_LONGEST _UxGT("Langste")
|
||||
#define MSG_INFO_PRINT_FILAMENT _UxGT("Extrud.")
|
||||
#endif
|
||||
PROGMEM Language_Str MSG_INFO_STATS_MENU = _UxGT("Printer Stats");
|
||||
PROGMEM Language_Str MSG_INFO_BOARD_MENU = _UxGT("Board Info"); //accepted English term in Dutch
|
||||
PROGMEM Language_Str MSG_INFO_THERMISTOR_MENU = _UxGT("Thermistors");
|
||||
PROGMEM Language_Str MSG_INFO_EXTRUDERS = _UxGT("Extruders");
|
||||
PROGMEM Language_Str MSG_INFO_BAUDRATE = _UxGT("Baud");
|
||||
PROGMEM Language_Str MSG_INFO_MENU = _UxGT("Over Printer");
|
||||
PROGMEM Language_Str MSG_INFO_PRINTER_MENU = _UxGT("Printer Info");
|
||||
PROGMEM Language_Str MSG_INFO_PROTOCOL = _UxGT("Protocol");
|
||||
PROGMEM Language_Str MSG_CASE_LIGHT = _UxGT("Case licht");
|
||||
|
||||
#define MSG_INFO_MIN_TEMP _UxGT("Min Temp")
|
||||
#define MSG_INFO_MAX_TEMP _UxGT("Max Temp")
|
||||
#define MSG_INFO_PSU _UxGT("PSU") //accepted English term in Dutch
|
||||
PROGMEM Language_Str MSG_EXPECTED_PRINTER = _UxGT("Onjuiste printer");
|
||||
|
||||
#define MSG_DRIVE_STRENGTH _UxGT("Motorstroom")
|
||||
#define MSG_DAC_PERCENT _UxGT("Driver %") //accepted English term in Dutch
|
||||
#define MSG_DAC_EEPROM_WRITE _UxGT("DAC Opslaan")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Hervat print")
|
||||
#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Nozzle: ") //accepeted English term
|
||||
//
|
||||
// Filament Change screens show up to 3 lines on a 4-line display
|
||||
// ...or up to 2 lines on a 3-line display
|
||||
//
|
||||
#if LCD_HEIGHT >= 4
|
||||
// Up to 3 lines
|
||||
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Wacht voor start")
|
||||
#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("filament te")
|
||||
#define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("verwisselen")
|
||||
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Wacht voor")
|
||||
#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("filament uit")
|
||||
#define MSG_FILAMENT_CHANGE_UNLOAD_3 _UxGT("te laden")
|
||||
#define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Klik knop om...")
|
||||
#define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("verw. nozzle.") //nozzle accepted English term
|
||||
#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Nozzle verw.")
|
||||
#define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("Wacht a.u.b.")
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Laad filament")
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("en druk knop")
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("om verder...")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Wacht voor")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("filament te")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("laden")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wacht voor print")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("om verder")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("te gaan")
|
||||
#else // LCD_HEIGHT < 4
|
||||
// Up to 2 lines
|
||||
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Wacht voor")
|
||||
#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("start...")
|
||||
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Wacht voor")
|
||||
#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("uitladen...")
|
||||
#define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Klik knop om...")
|
||||
#define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("verw. nozzle.") //nozzle accepted English term
|
||||
#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Verwarmen...")
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Laad filament")
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("en druk knop")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Wacht voor")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("inladen...")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wacht voor")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("printing...")
|
||||
#endif // LCD_HEIGHT < 4
|
||||
#if LCD_WIDTH >= 20
|
||||
PROGMEM Language_Str MSG_INFO_PRINT_COUNT = _UxGT("Printed Aantal");
|
||||
PROGMEM Language_Str MSG_INFO_COMPLETED_PRINTS = _UxGT("Totaal Voltooid");
|
||||
PROGMEM Language_Str MSG_INFO_PRINT_TIME = _UxGT("Totale Printtijd");
|
||||
PROGMEM Language_Str MSG_INFO_PRINT_LONGEST = _UxGT("Langste Printtijd");
|
||||
PROGMEM Language_Str MSG_INFO_PRINT_FILAMENT = _UxGT("Totaal Extrudeert");
|
||||
#else
|
||||
PROGMEM Language_Str MSG_INFO_PRINT_COUNT = _UxGT("Aantal");
|
||||
PROGMEM Language_Str MSG_INFO_COMPLETED_PRINTS = _UxGT("Voltooid");
|
||||
PROGMEM Language_Str MSG_INFO_PRINT_TIME = _UxGT("Printtijd ");
|
||||
PROGMEM Language_Str MSG_INFO_PRINT_LONGEST = _UxGT("Langste");
|
||||
PROGMEM Language_Str MSG_INFO_PRINT_FILAMENT = _UxGT("Extrud.");
|
||||
#endif
|
||||
|
||||
PROGMEM Language_Str MSG_INFO_MIN_TEMP = _UxGT("Min Temp");
|
||||
PROGMEM Language_Str MSG_INFO_MAX_TEMP = _UxGT("Max Temp");
|
||||
PROGMEM Language_Str MSG_INFO_PSU = _UxGT("PSU"); //accepted English term in Dutch
|
||||
|
||||
PROGMEM Language_Str MSG_DRIVE_STRENGTH = _UxGT("Motorstroom");
|
||||
PROGMEM Language_Str MSG_DAC_PERCENT = _UxGT("Driver %"); //accepted English term in Dutch
|
||||
PROGMEM Language_Str MSG_DAC_EEPROM_WRITE = _UxGT("DAC Opslaan");
|
||||
PROGMEM Language_Str MSG_FILAMENT_CHANGE_OPTION_RESUME = _UxGT("Hervat print");
|
||||
PROGMEM Language_Str MSG_FILAMENT_CHANGE_NOZZLE = _UxGT(" Nozzle: "); //accepeted English term
|
||||
//
|
||||
// Filament Change screens show up to 3 lines on a 4-line display
|
||||
// ...or up to 2 lines on a 3-line display
|
||||
//
|
||||
#if LCD_HEIGHT >= 4
|
||||
// Up to 3 lines
|
||||
PROGMEM Language_Str MSG_FILAMENT_CHANGE_INIT = _UxGT(MSG_3_LINE("Wacht voor start", "filament te", "verwisselen"));
|
||||
PROGMEM Language_Str MSG_FILAMENT_CHANGE_UNLOAD = _UxGT(MSG_3_LINE("Wacht voor", "filament uit", "te laden"));
|
||||
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEAT = _UxGT(MSG_2_LINE("Klik knop om...", "verw. nozzle.")); //nozzle accepted English term
|
||||
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEATING = _UxGT(MSG_2_LINE("Nozzle verw.", "Wacht a.u.b."));
|
||||
PROGMEM Language_Str MSG_FILAMENT_CHANGE_INSERT = _UxGT(MSG_3_LINE("Laad filament", "en druk knop", "om verder..."));
|
||||
PROGMEM Language_Str MSG_FILAMENT_CHANGE_LOAD = _UxGT(MSG_3_LINE("Wacht voor", "filament te", "laden"));
|
||||
PROGMEM Language_Str MSG_FILAMENT_CHANGE_RESUME = _UxGT(MSG_3_LINE("Wacht voor print", "om verder", "te gaan"));
|
||||
#else
|
||||
// Up to 2 lines
|
||||
PROGMEM Language_Str MSG_FILAMENT_CHANGE_INIT = _UxGT(MSG_2_LINE("Wacht voor", "start..."));
|
||||
PROGMEM Language_Str MSG_FILAMENT_CHANGE_UNLOAD = _UxGT(MSG_2_LINE("Wacht voor", "uitladen..."));
|
||||
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEAT = _UxGT(MSG_2_LINE("Klik knop om...", "verw. nozzle.")); //nozzle accepted English term
|
||||
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEATING = _UxGT(MSG_1_LINE("Verwarmen..."));
|
||||
PROGMEM Language_Str MSG_FILAMENT_CHANGE_INSERT = _UxGT(MSG_2_LINE("Laad filament", "en druk knop"));
|
||||
PROGMEM Language_Str MSG_FILAMENT_CHANGE_LOAD = _UxGT(MSG_2_LINE("Wacht voor", "inladen..."));
|
||||
PROGMEM Language_Str MSG_FILAMENT_CHANGE_RESUME = _UxGT(MSG_2_LINE("Wacht voor", "printing..."));
|
||||
#endif
|
||||
}
|
||||
|
||||
Reference in New Issue
Block a user