thebears/marlin_skr
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Prusa MMU2 (#12967)

Browse Source
This commit is contained in:
revilor
2019-02-01 02:10:52 +01:00
committed by Scott Lahteine
parent 996f7d1642
commit 6a57d0b381
180 changed files with 6218 additions and 49 deletions
Download Patch File Download Diff File Expand all files Collapse all files

38
Marlin/src/gcode/feature/pause/M600.cpp
View File

@@ -37,6 +37,10 @@
#include "../../../lcd/ultralcd.h"
#endif
#if ENABLED(PRUSA_MMU2)
#include "../../../feature/prusa_MMU2/mmu2_menu.h"
#endif
/**
* M600: Pause for filament change
*
@@ -71,7 +75,7 @@ void GcodeSuite::M600() {
#endif
// Show initial "wait for start" message
#if HAS_LCD_MENU
#if HAS_LCD_MENU && DISABLED(PRUSA_MMU2)
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_INIT, ADVANCED_PAUSE_MODE_PAUSE_PRINT, target_extruder);
#endif
@@ -110,16 +114,23 @@ void GcodeSuite::M600() {
park_point.y += (active_extruder ? hotend_offset[Y_AXIS][active_extruder] : 0);
#endif
// Unload filament
const float unload_length = -ABS(parser.seen('U') ? parser.value_axis_units(E_AXIS)
: fc_settings[active_extruder].unload_length);
#if ENABLED(PRUSA_MMU2)
// For MMU2 reset retract and load/unload values so they don't mess with MMU filament handling
constexpr float unload_length = 0.5f,
slow_load_length = 0.0f,
fast_load_length = 0.0f;
#else
// Unload filament
const float unload_length = -ABS(parser.seen('U') ? parser.value_axis_units(E_AXIS)
: fc_settings[active_extruder].unload_length);
// Slow load filament
constexpr float slow_load_length = FILAMENT_CHANGE_SLOW_LOAD_LENGTH;
// Slow load filament
constexpr float slow_load_length = FILAMENT_CHANGE_SLOW_LOAD_LENGTH;
// Fast load filament
const float fast_load_length = ABS(parser.seen('L') ? parser.value_axis_units(E_AXIS)
: fc_settings[active_extruder].load_length);
// Fast load filament
const float fast_load_length = ABS(parser.seen('L') ? parser.value_axis_units(E_AXIS)
: fc_settings[active_extruder].load_length);
#endif
const int beep_count = parser.intval('B',
#ifdef FILAMENT_CHANGE_ALERT_BEEPS
@@ -130,8 +141,13 @@ void GcodeSuite::M600() {
);
if (pause_print(retract, park_point, unload_length, true DXC_PASS)) {
wait_for_confirmation(true, beep_count DXC_PASS);
resume_print(slow_load_length, fast_load_length, ADVANCED_PAUSE_PURGE_LENGTH, beep_count DXC_PASS);
#if ENABLED(PRUSA_MMU2)
mmu2_M600();
resume_print(slow_load_length, fast_load_length, 0, beep_count DXC_PASS);
#else
wait_for_confirmation(true, beep_count DXC_PASS);
resume_print(slow_load_length, fast_load_length, ADVANCED_PAUSE_PURGE_LENGTH, beep_count DXC_PASS);
#endif
}
#if EXTRUDERS > 1