thebears/marlin_skr
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Misc. improvements (#12747)

Browse Source 
* Make ExtUI respect MAXTEMP limits
  - Temperatures are now clamped by MAXTEMP limits rather than arbitrary values.
* Speed up USB init, add status
  - Speed up USB initialization
  - Show status message if init failed
* Enable status messages for EXTENSIBLE_UI
* Adjust max limit to MAX_TEMP - 15
* Misc. tweaks to formatting, const, etc.
This commit is contained in:
Marcio Teixeira
2019-01-01 14:17:48 -07:00
committed by Scott Lahteine
parent 4f2473053c
commit 60cb36bef3
12 changed files with 188 additions and 209 deletions
Download Patch File Download Diff File Expand all files Collapse all files

26
Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.cpp
View File

@@ -31,6 +31,10 @@
#include "Sd2Card_FlashDrive.h"
#if ENABLED(ULTRA_LCD) || ENABLED(EXTENSIBLE_UI)
#include "../../lcd/ultralcd.h"
#endif
USB usb;
BulkOnly bulk(&usb);
@@ -46,25 +50,27 @@ void Sd2Card::idle() {
switch (state) {
case USB_HOST_DELAY_INIT:
next_retry = millis() + 10000;
next_retry = millis() + 2000;
state = USB_HOST_WAITING;
break;
case USB_HOST_WAITING:
if (ELAPSED(millis(), next_retry)) {
next_retry = millis() + 10000;
next_retry = millis() + 2000;
state = USB_HOST_UNINITIALIZED;
}
break;
case USB_HOST_UNINITIALIZED:
SERIAL_ECHOLNPGM("Starting USB host");
SERIAL_ECHOPGM("Starting USB host...");
if (!usb.start()) {
SERIAL_ECHOLNPGM("USB host failed to start. Will retry in 10 seconds.");
SERIAL_ECHOPGM(" Failed. Retrying in 2s.");
#if ENABLED(ULTRA_LCD) || ENABLED(EXTENSIBLE_UI)
LCD_MESSAGEPGM("USB start failed");
#endif
state = USB_HOST_DELAY_INIT;
}
else {
SERIAL_ECHOLNPGM("USB host initialized");
else
state = USB_HOST_INITIALIZED;
}
SERIAL_EOL();
break;
case USB_HOST_INITIALIZED:
const uint8_t lastUsbTaskState = usb.getUsbTaskState();
@@ -91,10 +97,10 @@ void Sd2Card::idle() {
// This is equivalent to polling the SD_DETECT when using SD cards.
bool Sd2Card::isInserted() {
return usb.getUsbTaskState() == USB_STATE_RUNNING;
};
}
// Marlin calls this to initialize an SD card once it is inserted.
bool Sd2Card::init(uint8_t sckRateID, uint8_t chipSelectPin) {
bool Sd2Card::init(const uint8_t sckRateID/*=0*/, const pin_t chipSelectPin/*=SD_CHIP_SELECT_PIN*/) {
if (!ready()) return false;
if (!bulk.LUNIsGood(0)) {
@@ -121,7 +127,7 @@ uint32_t Sd2Card::cardSize() {
#ifndef USB_DEBUG
const uint32_t
#endif
lun0_capacity = bulk.GetCapacity(0);
lun0_capacity = bulk.GetCapacity(0);
return lun0_capacity;
}