thebears/marlin_skr
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Implement HAL and apply macros across code-base

Browse Source 
Implement AVR Platform
This commit is contained in:
Christopher Pepper
2017-06-18 00:36:10 +01:00
committed by Scott Lahteine
parent fb04dfcda8
commit 4b16fa3272
65 changed files with 2264 additions and 761 deletions
Download Patch File Download Diff File Expand all files Collapse all files

81
Marlin/Conditionals_post.h
View File

@@ -203,6 +203,22 @@
#define DEFAULT_KEEPALIVE_INTERVAL 2
#endif
#ifdef CPU_32_BIT
/**
* Hidden options for developer
*/
// Double stepping start from STEP_DOUBLER_FREQUENCY + 1, quad stepping start from STEP_DOUBLER_FREQUENCY * 2 + 1
#ifndef STEP_DOUBLER_FREQUENCY
#if ENABLED(ADVANCE) || ENABLED(LIN_ADVANCE)
#define STEP_DOUBLER_FREQUENCY 60000 // Hz
#else
#define STEP_DOUBLER_FREQUENCY 80000 // Hz
#endif
#endif
// Disable double / quad stepping
//#define DISABLE_MULTI_STEPPING
#endif
/**
* Provide a MAX_AUTORETRACT for older configs
*/
@@ -214,9 +230,17 @@
* MAX_STEP_FREQUENCY differs for TOSHIBA
*/
#if ENABLED(CONFIG_STEPPERS_TOSHIBA)
#define MAX_STEP_FREQUENCY 10000 // Max step frequency for Toshiba Stepper Controllers
#ifdef CPU_32_BIT
#define MAX_STEP_FREQUENCY STEP_DOUBLER_FREQUENCY // Max step frequency for Toshiba Stepper Controllers, 96kHz is close to maximum for an Arduino Due
#else
#define MAX_STEP_FREQUENCY 10000 // Max step frequency for Toshiba Stepper Controllers
#endif
#else
#define MAX_STEP_FREQUENCY 40000 // Max step frequency for Ultimaker (5000 pps / half step)
#ifdef CPU_32_BIT
#define MAX_STEP_FREQUENCY (STEP_DOUBLER_FREQUENCY * 4) // Max step frequency for the Due is approx. 330kHz
#else
#define MAX_STEP_FREQUENCY 40000 // Max step frequency for Ultimaker (5000 pps / half step)
#endif
#endif
// MS1 MS2 Stepper Driver Microstepping mode table
@@ -224,7 +248,16 @@
#define MICROSTEP2 HIGH,LOW
#define MICROSTEP4 LOW,HIGH
#define MICROSTEP8 HIGH,HIGH
#ifdef __SAM3X8E__
#if MB(ALLIGATOR)
#define MICROSTEP16 LOW,LOW
#define MICROSTEP32 HIGH,HIGH
#else
#define MICROSTEP16 HIGH,HIGH
#endif
#else
#define MICROSTEP16 HIGH,HIGH
#endif
/**
* Advance calculated values
@@ -350,6 +383,10 @@
#define BED_USES_THERMISTOR
#endif
#ifdef __SAM3X8E__
#define HEATER_USES_AD595 (ENABLED(HEATER_0_USES_AD595) || ENABLED(HEATER_1_USES_AD595) || ENABLED(HEATER_2_USES_AD595) || ENABLED(HEATER_3_USES_AD595))
#endif
/**
* Flags for PID handling
*/
@@ -873,6 +910,18 @@
// Stepper pulse duration, in cycles
#define STEP_PULSE_CYCLES ((MINIMUM_STEPPER_PULSE) * CYCLES_PER_MICROSECOND)
#ifdef CPU_32_BIT
// Add additional delay for between direction signal and pulse signal of stepper
#ifndef STEPPER_DIRECTION_DELAY
#define STEPPER_DIRECTION_DELAY 0 // time in microseconds
#endif
#endif
#ifndef __SAM3X8E__ //todo: hal: broken hal encapsulation
#undef UI_VOLTAGE_LEVEL
#undef RADDS_DISPLAY
#undef MOTOR_CURRENT
#endif
#if ENABLED(SDCARD_SORT_ALPHA)
#define HAS_FOLDER_SORTING (FOLDER_SORTING || ENABLED(SDSORT_GCODE))
@@ -928,4 +977,32 @@
#endif
#endif
// Use float instead of double. Needs profiling.
#if defined(ARDUINO_ARCH_SAM) && ENABLED(DELTA_FAST_SQRT)
#undef ATAN2
#undef FABS
#undef POW
#undef SQRT
#undef CEIL
#undef FLOOR
#undef LROUND
#undef FMOD
#define ATAN2(y, x) atan2f(y, x)
#define FABS(x) fabsf(x)
#define POW(x, y) powf(x, y)
#define SQRT(x) sqrtf(x)
#define CEIL(x) ceilf(x)
#define FLOOR(x) floorf(x)
#define LROUND(x) lroundf(x)
#define FMOD(x, y) fmodf(x, y)
#endif
#ifdef TEENSYDUINO
#undef max
#define max(a,b) ((a)>(b)?(a):(b))
#undef min
#define min(a,b) ((a)<(b)?(a):(b))
#define NOT_A_PIN 0 // For PINS_DEBUGGING
#endif
#endif // CONDITIONALS_POST_H