thebears/marlin_skr
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

🔥 Drop STM L64** drivers, STEVAL_3DP001V1 (#24427)

Browse Source
This commit is contained in:
Bob Kuhn
2022-07-13 22:16:22 -05:00
committed by GitHub
parent 2dc543c4f5
commit 3f4e4a4d89
38 changed files with 55 additions and 5881 deletions
Download Patch File Download Diff File Expand all files Collapse all files

15
Marlin/src/gcode/gcode.h
View File

@@ -155,7 +155,7 @@
* M120 - Enable endstops detection.
* M121 - Disable endstops detection.
*
* M122 - Debug stepper (Requires at least one _DRIVER_TYPE defined as TMC2130/2160/5130/5160/2208/2209/2660 or L6470)
* M122 - Debug stepper (Requires at least one _DRIVER_TYPE defined as TMC2130/2160/5130/5160/2208/2209/2660)
* M123 - Report fan tachometers. (Requires En_FAN_TACHO_PIN) Optionally set auto-report interval. (Requires AUTO_REPORT_FANS)
* M125 - Save current position and move to filament change position. (Requires PARK_HEAD_ON_PAUSE)
*
@@ -286,7 +286,7 @@
* M871 - Print/reset/clear first layer temperature offset values. (Requires PTC_PROBE, PTC_BED, or PTC_HOTEND)
* M876 - Handle Prompt Response. (Requires HOST_PROMPT_SUPPORT and not EMERGENCY_PARSER)
* M900 - Get or Set Linear Advance K-factor. (Requires LIN_ADVANCE)
* M906 - Set or get motor current in milliamps using axis codes XYZE, etc. Report values if no axis codes given. (Requires at least one _DRIVER_TYPE defined as TMC2130/2160/5130/5160/2208/2209/2660 or L6470)
* M906 - Set or get motor current in milliamps using axis codes XYZE, etc. Report values if no axis codes given. (Requires at least one _DRIVER_TYPE defined as TMC2130/2160/5130/5160/2208/2209/2660)
* M907 - Set digital trimpot motor current using axis codes. (Requires a board with digital trimpots)
* M908 - Control digital trimpot directly. (Requires HAS_MOTOR_CURRENT_DAC or DIGIPOTSS_PIN)
* M909 - Print digipot/DAC current value. (Requires HAS_MOTOR_CURRENT_DAC)
@@ -295,9 +295,6 @@
* M912 - Clear stepper driver overtemperature pre-warn condition flag. (Requires at least one _DRIVER_TYPE defined as TMC2130/2160/5130/5160/2208/2209/2660)
* M913 - Set HYBRID_THRESHOLD speed. (Requires HYBRID_THRESHOLD)
* M914 - Set StallGuard sensitivity. (Requires SENSORLESS_HOMING or SENSORLESS_PROBING)
* M916 - L6470 tuning: Increase KVAL_HOLD until thermal warning. (Requires at least one _DRIVER_TYPE L6470)
* M917 - L6470 tuning: Find minimum current thresholds. (Requires at least one _DRIVER_TYPE L6470)
* M918 - L6470 tuning: Increase speed until max or error. (Requires at least one _DRIVER_TYPE L6470)
* M919 - Get or Set motor Chopper Times (time_off, hysteresis_end, hysteresis_start) using axis codes XYZE, etc. If no parameters are given, report. (Requires at least one _DRIVER_TYPE defined as TMC2130/2160/5130/5160/2208/2209/2660)
* M951 - Set Magnetic Parking Extruder parameters. (Requires MAGNETIC_PARKING_EXTRUDER)
* M3426 - Read MCP3426 ADC over I2C. (Requires HAS_MCP3426_ADC)
@@ -1163,14 +1160,6 @@ private:
static void M919();
#endif
#if HAS_L64XX
static void M122();
static void M906();
static void M916();
static void M917();
static void M918();
#endif
#if HAS_MOTOR_CURRENT_SPI || HAS_MOTOR_CURRENT_PWM || HAS_MOTOR_CURRENT_I2C || HAS_MOTOR_CURRENT_DAC
static void M907();
#if HAS_MOTOR_CURRENT_SPI || HAS_MOTOR_CURRENT_PWM