STM32F7 HAL using the official STM32 Arduino Core (#11750)

Marlin/src/HAL/HAL_STM32/endstop_interrupts.h

@@ -0,0 +1,59 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ * Copyright (C) 2017 Victor Perez
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#include "../../module/endstops.h"
+
+// One ISR for all EXT-Interrupts
+void endstop_ISR(void) { endstops.update(); }
+
+void setup_endstop_interrupts(void) {
+  #if HAS_X_MAX
+    attachInterrupt(X_MAX_PIN, endstop_ISR, CHANGE);
+  #endif
+  #if HAS_X_MIN
+    attachInterrupt(X_MIN_PIN, endstop_ISR, CHANGE);
+  #endif
+  #if HAS_Y_MAX
+    attachInterrupt(Y_MAX_PIN, endstop_ISR, CHANGE);
+  #endif
+  #if HAS_Y_MIN
+    attachInterrupt(Y_MIN_PIN, endstop_ISR, CHANGE);
+  #endif
+  #if HAS_Z_MAX
+    attachInterrupt(Z_MAX_PIN, endstop_ISR, CHANGE);
+  #endif
+  #if HAS_Z_MIN
+    attachInterrupt(Z_MIN_PIN, endstop_ISR, CHANGE);
+  #endif
+  #if HAS_Z2_MAX
+    attachInterrupt(Z2_MAX_PIN, endstop_ISR, CHANGE);
+  #endif
+  #if HAS_Z2_MIN
+    attachInterrupt(Z2_MIN_PIN, endstop_ISR, CHANGE);
+  #endif
+  #if HAS_Z_MIN_PROBE_PIN
+    attachInterrupt(Z_MIN_PROBE_PIN, endstop_ISR, CHANGE);
+  #endif
+}
+