✨ Add TEMP_SENSOR_BOARD (#22279)
This commit is contained in:
Katelyn Schiesser
committed by
GitHub
GitHub
parent
4b63578a10
commit
2f6c8e1176
@@ -125,6 +125,29 @@
|
||||
#undef THERMAL_PROTECTION_COOLER
|
||||
#endif
|
||||
|
||||
// Usurp a sensor to do redundant readings
|
||||
#if TEMP_SENSOR_REDUNDANT
|
||||
#define REDUNDANT_TEMP_MATCH(M,N) (TEMP_SENSOR_REDUNDANT_##M == HID_##N)
|
||||
#else
|
||||
#define REDUNDANT_TEMP_MATCH(...) 0
|
||||
#endif
|
||||
|
||||
// Temperature sensor IDs
|
||||
#define HID_REDUNDANT -6
|
||||
#define HID_COOLER -5
|
||||
#define HID_PROBE -4
|
||||
#define HID_BOARD -3
|
||||
#define HID_CHAMBER -2
|
||||
#define HID_BED -1
|
||||
#define HID_E0 0
|
||||
#define HID_E1 1
|
||||
#define HID_E2 2
|
||||
#define HID_E3 3
|
||||
#define HID_E4 4
|
||||
#define HID_E5 5
|
||||
#define HID_E6 6
|
||||
#define HID_E7 7
|
||||
|
||||
#if ENABLED(MIXING_EXTRUDER) && (ENABLED(RETRACT_SYNC_MIXING) || BOTH(FILAMENT_LOAD_UNLOAD_GCODES, FILAMENT_UNLOAD_ALL_EXTRUDERS))
|
||||
#define HAS_MIXER_SYNC_CHANNEL 1
|
||||
#endif
|
||||
|
||||
@@ -532,84 +532,84 @@
|
||||
// Usurp a sensor to do redundant readings
|
||||
#if TEMP_SENSOR_REDUNDANT
|
||||
#ifndef TEMP_SENSOR_REDUNDANT_SOURCE
|
||||
#define TEMP_SENSOR_REDUNDANT_SOURCE 1
|
||||
#define TEMP_SENSOR_REDUNDANT_SOURCE E1
|
||||
#endif
|
||||
#ifndef TEMP_SENSOR_REDUNDANT_TARGET
|
||||
#define TEMP_SENSOR_REDUNDANT_TARGET 0
|
||||
#define TEMP_SENSOR_REDUNDANT_TARGET E0
|
||||
#endif
|
||||
#if !PIN_EXISTS(TEMP_REDUNDANT)
|
||||
#ifndef TEMP_SENSOR_REDUNDANT_MAX_DIFF
|
||||
#define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10
|
||||
#endif
|
||||
#if TEMP_SENSOR_REDUNDANT_SOURCE == -5
|
||||
#if REDUNDANT_TEMP_MATCH(SOURCE, COOLER)
|
||||
#if !PIN_EXISTS(TEMP_COOLER)
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to COOLER requires TEMP_COOLER_PIN."
|
||||
#else
|
||||
#define TEMP_REDUNDANT_PIN TEMP_COOLER_PIN
|
||||
#endif
|
||||
#elif TEMP_SENSOR_REDUNDANT_SOURCE == -4
|
||||
#elif REDUNDANT_TEMP_MATCH(SOURCE, PROBE)
|
||||
#if !PIN_EXISTS(TEMP_PROBE)
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to PROBE requires TEMP_PROBE_PIN."
|
||||
#else
|
||||
#define TEMP_REDUNDANT_PIN TEMP_PROBE_PIN
|
||||
#endif
|
||||
#elif TEMP_SENSOR_REDUNDANT_SOURCE == -2
|
||||
#elif REDUNDANT_TEMP_MATCH(SOURCE, CHAMBER)
|
||||
#if !PIN_EXISTS(TEMP_CHAMBER)
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to CHAMBER requires TEMP_CHAMBER_PIN."
|
||||
#else
|
||||
#define TEMP_REDUNDANT_PIN TEMP_CHAMBER_PIN
|
||||
#endif
|
||||
#elif TEMP_SENSOR_REDUNDANT_SOURCE == -1
|
||||
#elif REDUNDANT_TEMP_MATCH(SOURCE, BED)
|
||||
#if !PIN_EXISTS(TEMP_BED)
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to BED requires TEMP_BED_PIN."
|
||||
#else
|
||||
#define TEMP_REDUNDANT_PIN TEMP_BED_PIN
|
||||
#endif
|
||||
#elif TEMP_SENSOR_REDUNDANT_SOURCE == 0
|
||||
#elif REDUNDANT_TEMP_MATCH(SOURCE, E0)
|
||||
#if !PIN_EXISTS(TEMP_0)
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to 0 requires TEMP_0_PIN."
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to E0 requires TEMP_0_PIN."
|
||||
#else
|
||||
#define TEMP_REDUNDANT_PIN TEMP_0_PIN
|
||||
#endif
|
||||
#elif TEMP_SENSOR_REDUNDANT_SOURCE == 1
|
||||
#elif REDUNDANT_TEMP_MATCH(SOURCE, E1)
|
||||
#if !PIN_EXISTS(TEMP_1)
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to 1 requires TEMP_1_PIN."
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to E1 requires TEMP_1_PIN."
|
||||
#else
|
||||
#define TEMP_REDUNDANT_PIN TEMP_1_PIN
|
||||
#endif
|
||||
#elif TEMP_SENSOR_REDUNDANT_SOURCE == 2
|
||||
#elif REDUNDANT_TEMP_MATCH(SOURCE, E2)
|
||||
#if !PIN_EXISTS(TEMP_2)
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to 2 requires TEMP_2_PIN."
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to E2 requires TEMP_2_PIN."
|
||||
#else
|
||||
#define TEMP_REDUNDANT_PIN TEMP_2_PIN
|
||||
#endif
|
||||
#elif TEMP_SENSOR_REDUNDANT_SOURCE == 3
|
||||
#elif REDUNDANT_TEMP_MATCH(SOURCE, E3)
|
||||
#if !PIN_EXISTS(TEMP_3)
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to 3 requires TEMP_3_PIN."
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to E3 requires TEMP_3_PIN."
|
||||
#else
|
||||
#define TEMP_REDUNDANT_PIN TEMP_3_PIN
|
||||
#endif
|
||||
#elif TEMP_SENSOR_REDUNDANT_SOURCE == 4
|
||||
#elif REDUNDANT_TEMP_MATCH(SOURCE, E4)
|
||||
#if !PIN_EXISTS(TEMP_4)
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to 4 requires TEMP_4_PIN."
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to E4 requires TEMP_4_PIN."
|
||||
#else
|
||||
#define TEMP_REDUNDANT_PIN TEMP_4_PIN
|
||||
#endif
|
||||
#elif TEMP_SENSOR_REDUNDANT_SOURCE == 5
|
||||
#elif REDUNDANT_TEMP_MATCH(SOURCE, E5)
|
||||
#if !PIN_EXISTS(TEMP_5)
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to 5 requires TEMP_5_PIN."
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to E5 requires TEMP_5_PIN."
|
||||
#else
|
||||
#define TEMP_REDUNDANT_PIN TEMP_5_PIN
|
||||
#endif
|
||||
#elif TEMP_SENSOR_REDUNDANT_SOURCE == 6
|
||||
#elif REDUNDANT_TEMP_MATCH(SOURCE, E6)
|
||||
#if !PIN_EXISTS(TEMP_6)
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to 6 requires TEMP_6_PIN."
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to E6 requires TEMP_6_PIN."
|
||||
#else
|
||||
#define TEMP_REDUNDANT_PIN TEMP_6_PIN
|
||||
#endif
|
||||
#elif TEMP_SENSOR_REDUNDANT_SOURCE == 7
|
||||
#elif REDUNDANT_TEMP_MATCH(SOURCE, E7)
|
||||
#if !PIN_EXISTS(TEMP_7)
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to 7 requires TEMP_7_PIN."
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to E7 requires TEMP_7_PIN."
|
||||
#else
|
||||
#define TEMP_REDUNDANT_PIN TEMP_7_PIN
|
||||
#endif
|
||||
@@ -699,7 +699,7 @@
|
||||
#define TEMP_SENSOR_REDUNDANT_IS_MAX_TC 1
|
||||
|
||||
#if TEMP_SENSOR_REDUNDANT == -5
|
||||
#if TEMP_SENSOR_REDUNDANT_SOURCE != 0 && TEMP_SENSOR_REDUNDANT_SOURCE != 1
|
||||
#if !REDUNDANT_TEMP_MATCH(SOURCE, E0) && !REDUNDANT_TEMP_MATCH(SOURCE, E1)
|
||||
#error "MAX31865 Thermocouples (-5) not supported for TEMP_SENSOR_REDUNDANT_SOURCE other than TEMP_SENSOR_0/TEMP_SENSOR_1 (0/1)."
|
||||
#endif
|
||||
|
||||
@@ -707,7 +707,7 @@
|
||||
#define TEMP_SENSOR_REDUNDANT_MAX_TC_TMIN 0
|
||||
#define TEMP_SENSOR_REDUNDANT_MAX_TC_TMAX 1024
|
||||
#elif TEMP_SENSOR_REDUNDANT == -3
|
||||
#if TEMP_SENSOR_REDUNDANT_SOURCE != 0 && TEMP_SENSOR_REDUNDANT_SOURCE != 1
|
||||
#if !REDUNDANT_TEMP_MATCH(SOURCE, E0) && !REDUNDANT_TEMP_MATCH(SOURCE, E1)
|
||||
#error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_REDUNDANT_SOURCE other than TEMP_SENSOR_0/TEMP_SENSOR_1 (0/1)."
|
||||
#endif
|
||||
|
||||
@@ -715,7 +715,7 @@
|
||||
#define TEMP_SENSOR_REDUNDANT_MAX_TC_TMIN -270
|
||||
#define TEMP_SENSOR_REDUNDANT_MAX_TC_TMAX 1800
|
||||
#elif TEMP_SENSOR_REDUNDANT == -2
|
||||
#if TEMP_SENSOR_REDUNDANT_SOURCE != 0 && TEMP_SENSOR_REDUNDANT_SOURCE != 1
|
||||
#if !REDUNDANT_TEMP_MATCH(SOURCE, E0) && !REDUNDANT_TEMP_MATCH(SOURCE, E1)
|
||||
#error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_REDUNDANT_SOURCE other than TEMP_SENSOR_0/TEMP_SENSOR_1 (0/1)."
|
||||
#endif
|
||||
|
||||
@@ -725,13 +725,13 @@
|
||||
#endif
|
||||
|
||||
// mimic setting up the source TEMP_SENSOR
|
||||
#if TEMP_SENSOR_REDUNDANT_SOURCE == 0
|
||||
#if REDUNDANT_TEMP_MATCH(SOURCE, E0)
|
||||
#define TEMP_SENSOR_0_MAX_TC_TMIN TEMP_SENSOR_REDUNDANT_MAX_TC_TMIN
|
||||
#define TEMP_SENSOR_0_MAX_TC_TMAX TEMP_SENSOR_REDUNDANT_MAX_TC_TMAX
|
||||
#ifndef MAX31865_SENSOR_WIRES_0
|
||||
#define MAX31865_SENSOR_WIRES_0 2
|
||||
#endif
|
||||
#elif TEMP_SENSOR_REDUNDANT_SOURCE == 1
|
||||
#elif REDUNDANT_TEMP_MATCH(SOURCE, E1)
|
||||
#define TEMP_SENSOR_1_MAX_TC_TMIN TEMP_SENSOR_REDUNDANT_MAX_TC_TMIN
|
||||
#define TEMP_SENSOR_1_MAX_TC_TMAX TEMP_SENSOR_REDUNDANT_MAX_TC_TMAX
|
||||
#ifndef MAX31865_SENSOR_WIRES_1
|
||||
@@ -780,7 +780,7 @@
|
||||
#if HAS_MAX_TC
|
||||
|
||||
// Translate old _SS, _CS, _SCK, _DO, _DI, _MISO, and _MOSI PIN defines.
|
||||
#if TEMP_SENSOR_0_IS_MAX_TC || (TEMP_SENSOR_REDUNDANT_IS_MAX_TC && TEMP_SENSOR_REDUNDANT_SOURCE == 1)
|
||||
#if TEMP_SENSOR_0_IS_MAX_TC || (TEMP_SENSOR_REDUNDANT_IS_MAX_TC && REDUNDANT_TEMP_MATCH(SOURCE, E1))
|
||||
|
||||
#if !PIN_EXISTS(TEMP_0_CS) // SS, CS
|
||||
#if PIN_EXISTS(MAX6675_SS)
|
||||
@@ -849,7 +849,7 @@
|
||||
|
||||
#endif // TEMP_SENSOR_0_IS_MAX_TC
|
||||
|
||||
#if TEMP_SENSOR_1_IS_MAX_TC || (TEMP_SENSOR_REDUNDANT_IS_MAX_TC && TEMP_SENSOR_REDUNDANT_SOURCE == 1)
|
||||
#if TEMP_SENSOR_1_IS_MAX_TC || (TEMP_SENSOR_REDUNDANT_IS_MAX_TC && REDUNDANT_TEMP_MATCH(SOURCE, E1))
|
||||
|
||||
#if !PIN_EXISTS(TEMP_1_CS) // SS2, CS2
|
||||
#if PIN_EXISTS(MAX6675_SS2)
|
||||
@@ -2584,6 +2584,9 @@
|
||||
#if HAS_ADC_TEST(COOLER)
|
||||
#define HAS_TEMP_ADC_COOLER 1
|
||||
#endif
|
||||
#if HAS_ADC_TEST(BOARD)
|
||||
#define HAS_TEMP_ADC_BOARD 1
|
||||
#endif
|
||||
#if HAS_ADC_TEST(REDUNDANT)
|
||||
#define HAS_TEMP_ADC_REDUNDANT 1
|
||||
#endif
|
||||
@@ -2604,6 +2607,9 @@
|
||||
#if HAS_TEMP(COOLER)
|
||||
#define HAS_TEMP_COOLER 1
|
||||
#endif
|
||||
#if HAS_TEMP(BOARD)
|
||||
#define HAS_TEMP_BOARD 1
|
||||
#endif
|
||||
#if HAS_TEMP(REDUNDANT)
|
||||
#define HAS_TEMP_REDUNDANT 1
|
||||
#endif
|
||||
@@ -2675,7 +2681,8 @@
|
||||
#if HAS_HEATED_BED || HAS_TEMP_CHAMBER
|
||||
#define BED_OR_CHAMBER 1
|
||||
#endif
|
||||
#if HAS_TEMP_HOTEND || BED_OR_CHAMBER || HAS_TEMP_PROBE || HAS_TEMP_COOLER
|
||||
|
||||
#if HAS_TEMP_HOTEND || BED_OR_CHAMBER || HAS_TEMP_PROBE || HAS_TEMP_COOLER || HAS_TEMP_BOARD
|
||||
#define HAS_TEMP_SENSOR 1
|
||||
#endif
|
||||
|
||||
@@ -2813,9 +2820,6 @@
|
||||
#endif
|
||||
#undef _NOT_E_AUTO
|
||||
#undef _HAS_FAN
|
||||
#if PIN_EXISTS(CONTROLLER_FAN)
|
||||
#define HAS_CONTROLLER_FAN 1
|
||||
#endif
|
||||
|
||||
#if BED_OR_CHAMBER || HAS_FAN0
|
||||
#define BED_OR_CHAMBER_OR_FAN 1
|
||||
@@ -2892,6 +2896,27 @@
|
||||
#define FAST_PWM_FAN_FREQUENCY ((F_CPU) / (2 * 255 * 1)) // Fan frequency default
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Controller Fan Settings
|
||||
*/
|
||||
#if PIN_EXISTS(CONTROLLER_FAN)
|
||||
#define HAS_CONTROLLER_FAN 1
|
||||
#if CONTROLLER_FAN_MIN_BOARD_TEMP
|
||||
#define HAS_CONTROLLER_FAN_MIN_BOARD_TEMP 1
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if HAS_CONTROLLER_FAN
|
||||
#if ENABLED(CONTROLLER_FAN_USE_BOARD_TEMP)
|
||||
#define HAS_CONTROLLER_FAN_BOARD_TEMP_TRIGGER 1
|
||||
#ifndef CONTROLLER_FAN_TRIGGER_TEMP
|
||||
#define CONTROLLER_FAN_TRIGGER_TEMP 30
|
||||
#endif
|
||||
#else
|
||||
#undef CONTROLLER_FAN_TRIGGER_TEMP
|
||||
#endif
|
||||
#endif
|
||||
|
||||
// Servos
|
||||
#if PIN_EXISTS(SERVO0) && NUM_SERVOS > 0
|
||||
#define HAS_SERVO_0 1
|
||||
|
||||
@@ -583,6 +583,10 @@
|
||||
#error "TEMP_SENSOR_1_AS_REDUNDANT is now TEMP_SENSOR_REDUNDANT, with associated TEMP_SENSOR_REDUNDANT_* config."
|
||||
#elif defined(MAX_REDUNDANT_TEMP_SENSOR_DIFF)
|
||||
#error "MAX_REDUNDANT_TEMP_SENSOR_DIFF is now TEMP_SENSOR_REDUNDANT_MAX_DIFF"
|
||||
#elif MOTHERBOARD == BOARD_DUE3DOM_MINI && PIN_EXISTS(TEMP_2) && DISABLED(TEMP_SENSOR_BOARD)
|
||||
#warning "Onboard temperature sensor for BOARD_DUE3DOM_MINI has moved from TEMP_SENSOR_2 (TEMP_2_PIN) to TEMP_SENSOR_BOARD (TEMP_BOARD_PIN)."
|
||||
#elif MOTHERBOARD == BOARD_BTT_SKR_E3_TURBO && PIN_EXISTS(TEMP_2) && DISABLED(TEMP_SENSOR_BOARD)
|
||||
#warning "Onboard temperature sensor for BOARD_BTT_SKR_E3_TURBO has moved from TEMP_SENSOR_2 (TEMP_2_PIN) to TEMP_SENSOR_BOARD (TEMP_BOARD_PIN)."
|
||||
#endif
|
||||
|
||||
constexpr float arm[] = AXIS_RELATIVE_MODES;
|
||||
@@ -1959,6 +1963,8 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
|
||||
#error "TEMP_SENSOR_CHAMBER 1000 requires CHAMBER_PULLUP_RESISTOR_OHMS, CHAMBER_RESISTANCE_25C_OHMS and CHAMBER_BETA in Configuration_adv.h."
|
||||
#elif TEMP_SENSOR_PROBE_IS_CUSTOM && !(defined(PROBE_PULLUP_RESISTOR_OHMS) && defined(PROBE_RESISTANCE_25C_OHMS) && defined(PROBE_BETA))
|
||||
#error "TEMP_SENSOR_PROBE 1000 requires PROBE_PULLUP_RESISTOR_OHMS, PROBE_RESISTANCE_25C_OHMS and PROBE_BETA in Configuration_adv.h."
|
||||
#elif TEMP_SENSOR_BOARD_IS_CUSTOM && !(defined(BOARD_PULLUP_RESISTOR_OHMS) && defined(BOARD_RESISTANCE_25C_OHMS) && defined(BOARD_BETA))
|
||||
#error "TEMP_SENSOR_BOARD 1000 requires BOARD_PULLUP_RESISTOR_OHMS, BOARD_RESISTANCE_25C_OHMS and BOARD_BETA in Configuration_adv.h."
|
||||
#elif TEMP_SENSOR_REDUNDANT_IS_CUSTOM && !(defined(REDUNDANT_PULLUP_RESISTOR_OHMS) && defined(REDUNDANT_RESISTANCE_25C_OHMS) && defined(REDUNDANT_BETA))
|
||||
#error "TEMP_SENSOR_REDUNDANT 1000 requires REDUNDANT_PULLUP_RESISTOR_OHMS, REDUNDANT_RESISTANCE_25C_OHMS and REDUNDANT_BETA in Configuration_adv.h."
|
||||
#endif
|
||||
@@ -1966,14 +1972,14 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
|
||||
/**
|
||||
* Required MAX31865 settings
|
||||
*/
|
||||
#if TEMP_SENSOR_0_IS_MAX31865 || (TEMP_SENSOR_REDUNDANT_IS_MAX31865 && TEMP_SENSOR_REDUNDANT_SOURCE == 0)
|
||||
#if TEMP_SENSOR_0_IS_MAX31865 || (TEMP_SENSOR_REDUNDANT_IS_MAX31865 && REDUNDANT_TEMP_MATCH(SOURCE, E0))
|
||||
#if !defined(MAX31865_SENSOR_WIRES_0) || !WITHIN(MAX31865_SENSOR_WIRES_0, 2, 4)
|
||||
#error "MAX31865_SENSOR_WIRES_0 must be defined as an integer between 2 and 4."
|
||||
#elif !defined(MAX31865_SENSOR_OHMS_0) || !defined(MAX31865_CALIBRATION_OHMS_0)
|
||||
#error "MAX31865_SENSOR_OHMS_0 and MAX31865_CALIBRATION_OHMS_0 must be set if TEMP_SENSOR_0/TEMP_SENSOR_REDUNDANT is MAX31865."
|
||||
#endif
|
||||
#endif
|
||||
#if TEMP_SENSOR_1_IS_MAX31865 || (TEMP_SENSOR_REDUNDANT_IS_MAX31865 && TEMP_SENSOR_REDUNDANT_SOURCE == 1)
|
||||
#if TEMP_SENSOR_1_IS_MAX31865 || (TEMP_SENSOR_REDUNDANT_IS_MAX31865 && REDUNDANT_TEMP_MATCH(SOURCE, E1))
|
||||
#if !defined(MAX31865_SENSOR_WIRES_1) || !WITHIN(MAX31865_SENSOR_WIRES_1, 2, 4)
|
||||
#error "MAX31865_SENSOR_WIRES_1 must be defined as an integer between 2 and 4."
|
||||
#elif !defined(MAX31865_SENSOR_OHMS_1) || !defined(MAX31865_CALIBRATION_OHMS_1)
|
||||
@@ -1989,62 +1995,58 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
|
||||
#error "TEMP_SENSOR_REDUNDANT requires TEMP_SENSOR_REDUNDANT_SOURCE."
|
||||
#elif !defined(TEMP_SENSOR_REDUNDANT_TARGET)
|
||||
#error "TEMP_SENSOR_REDUNDANT requires TEMP_SENSOR_REDUNDANT_TARGET."
|
||||
#elif TEMP_SENSOR_REDUNDANT_SOURCE == TEMP_SENSOR_REDUNDANT_TARGET
|
||||
#elif REDUNDANT_TEMP_MATCH(SOURCE, TEMP_SENSOR_REDUNDANT_TARGET)
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE can't be the same as TEMP_SENSOR_REDUNDANT_TARGET."
|
||||
#elif TEMP_SENSOR_REDUNDANT_SOURCE < -5 || TEMP_SENSOR_REDUNDANT_SOURCE > 7
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE must be between -5 and 7."
|
||||
#elif TEMP_SENSOR_REDUNDANT_TARGET < -5 || TEMP_SENSOR_REDUNDANT_TARGET > 7
|
||||
#error "TEMP_SENSOR_REDUNDANT_TARGET must be between -5 and 7."
|
||||
#elif TEMP_SENSOR_REDUNDANT_SOURCE == -3
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE can't be -3 (not used)."
|
||||
#elif TEMP_SENSOR_REDUNDANT_TARGET == -3
|
||||
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be -3 (not used)."
|
||||
#elif HAS_MULTI_HOTEND && TEMP_SENSOR_REDUNDANT_SOURCE < HOTENDS
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE must be after the last TEMP_SENSOR used with a hotend; you can't use a sensor in the middle of two hotends."
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE must be after the last used hotend TEMP_SENSOR."
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_REDUNDANT_SOURCE == 0 && HAS_HOTEND
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE can not be 0 if a hotend is used. E0 always uses TEMP_SENSOR_0."
|
||||
#elif TEMP_SENSOR_REDUNDANT_SOURCE == -5 && HAS_TEMP_COOLER
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE can't be Cooler (-5): TEMP_SENSOR_COOLER has already defined the sensor."
|
||||
#elif TEMP_SENSOR_REDUNDANT_SOURCE == -4 && HAS_TEMP_PROBE
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE can't be Probe (-4): TEMP_SENSOR_PROBE has already defined the sensor."
|
||||
#elif TEMP_SENSOR_REDUNDANT_SOURCE == -2 && HAS_TEMP_CHAMBER
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE can't be Chamber (-2): TEMP_SENSOR_CHAMBER has already defined the sensor."
|
||||
#elif TEMP_SENSOR_REDUNDANT_SOURCE == -1 && HAS_TEMP_BED
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE can't be Bed (-1): TEMP_SENSOR_BED has already defined the sensor."
|
||||
#if REDUNDANT_TEMP_MATCH(SOURCE, E0) && HAS_HOTEND
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE can't be 0 if a hotend is used. E0 always uses TEMP_SENSOR_0."
|
||||
#elif REDUNDANT_TEMP_MATCH(SOURCE, COOLER) && HAS_TEMP_COOLER
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE can't be COOLER. TEMP_SENSOR_COOLER is in use."
|
||||
#elif REDUNDANT_TEMP_MATCH(SOURCE, PROBE) && HAS_TEMP_PROBE
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE can't be PROBE. TEMP_SENSOR_PROBE is in use."
|
||||
#elif REDUNDANT_TEMP_MATCH(SOURCE, BOARD) && HAS_TEMP_BOARD
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE can't be BOARD. TEMP_SENSOR_BOARD is in use."
|
||||
#elif REDUNDANT_TEMP_MATCH(SOURCE, CHAMBER) && HAS_TEMP_CHAMBER
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE can't be CHAMBER. TEMP_SENSOR_CHAMBER is in use."
|
||||
#elif REDUNDANT_TEMP_MATCH(SOURCE, BED) && HAS_TEMP_BED
|
||||
#error "TEMP_SENSOR_REDUNDANT_SOURCE can't be BED. TEMP_SENSOR_BED is in use."
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_REDUNDANT_TARGET == 0 && !PIN_EXISTS(TEMP_0)
|
||||
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be E0 (0): requires TEMP_0_PIN"
|
||||
#elif TEMP_SENSOR_REDUNDANT_TARGET == 1 && !PIN_EXISTS(TEMP_1)
|
||||
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be E1 (1): requires TEMP_1_PIN"
|
||||
#elif TEMP_SENSOR_REDUNDANT_TARGET == 2 && !PIN_EXISTS(TEMP_2)
|
||||
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be E2 (2): requires TEMP_2_PIN"
|
||||
#elif TEMP_SENSOR_REDUNDANT_TARGET == 3 && !PIN_EXISTS(TEMP_3)
|
||||
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be E3 (3): requires TEMP_3_PIN"
|
||||
#elif TEMP_SENSOR_REDUNDANT_TARGET == 4 && !PIN_EXISTS(TEMP_4)
|
||||
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be E4 (4): requires TEMP_4_PIN"
|
||||
#elif TEMP_SENSOR_REDUNDANT_TARGET == 5 && !PIN_EXISTS(TEMP_5)
|
||||
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be E5 (5): requires TEMP_5_PIN"
|
||||
#elif TEMP_SENSOR_REDUNDANT_TARGET == 6 && !PIN_EXISTS(TEMP_6)
|
||||
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be E6 (6): requires TEMP_6_PIN"
|
||||
#elif TEMP_SENSOR_REDUNDANT_TARGET == 7 && !PIN_EXISTS(TEMP_7)
|
||||
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be E7 (7): requires TEMP_7_PIN"
|
||||
#elif TEMP_SENSOR_REDUNDANT_TARGET == -1 && !PIN_EXISTS(TEMP_BED)
|
||||
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be Bed (-1): requires TEMP_BED_PIN"
|
||||
#elif TEMP_SENSOR_REDUNDANT_TARGET == -2 && !PIN_EXISTS(TEMP_CHAMBER)
|
||||
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be Chamber (-2): requires TEMP_CHAMBER_PIN"
|
||||
#elif TEMP_SENSOR_REDUNDANT_TARGET == -4 && !PIN_EXISTS(TEMP_PROBE)
|
||||
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be Probe (-4): requires TEMP_PROBE_PIN"
|
||||
#elif TEMP_SENSOR_REDUNDANT_TARGET == -5 && !PIN_EXISTS(TEMP_COOLER)
|
||||
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be Cooler (-5): requires TEMP_COOLER_PIN"
|
||||
#if REDUNDANT_TEMP_MATCH(TARGET, E0) && !PIN_EXISTS(TEMP_0)
|
||||
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be E0 without TEMP_0_PIN defined."
|
||||
#elif REDUNDANT_TEMP_MATCH(TARGET, E1) && !PIN_EXISTS(TEMP_1)
|
||||
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be E1 without TEMP_1_PIN defined."
|
||||
#elif REDUNDANT_TEMP_MATCH(TARGET, E2) && !PIN_EXISTS(TEMP_2)
|
||||
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be E2 without TEMP_2_PIN defined."
|
||||
#elif REDUNDANT_TEMP_MATCH(TARGET, E3) && !PIN_EXISTS(TEMP_3)
|
||||
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be E3 without TEMP_3_PIN defined."
|
||||
#elif REDUNDANT_TEMP_MATCH(TARGET, E4) && !PIN_EXISTS(TEMP_4)
|
||||
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be E4 without TEMP_4_PIN defined."
|
||||
#elif REDUNDANT_TEMP_MATCH(TARGET, E5) && !PIN_EXISTS(TEMP_5)
|
||||
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be E5 without TEMP_5_PIN defined."
|
||||
#elif REDUNDANT_TEMP_MATCH(TARGET, E6) && !PIN_EXISTS(TEMP_6)
|
||||
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be E6 without TEMP_6_PIN defined."
|
||||
#elif REDUNDANT_TEMP_MATCH(TARGET, E7) && !PIN_EXISTS(TEMP_7)
|
||||
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be E7 without TEMP_7_PIN defined."
|
||||
#elif REDUNDANT_TEMP_MATCH(TARGET, BED) && !PIN_EXISTS(TEMP_BED)
|
||||
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be BED without TEMP_BED_PIN defined."
|
||||
#elif REDUNDANT_TEMP_MATCH(TARGET, CHAMBER) && !PIN_EXISTS(TEMP_CHAMBER)
|
||||
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be CHAMBER without TEMP_CHAMBER_PIN defined."
|
||||
#elif REDUNDANT_TEMP_MATCH(TARGET, BOARD) && !PIN_EXISTS(TEMP_BOARD)
|
||||
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be BOARD without TEMP_BOARD_PIN defined."
|
||||
#elif REDUNDANT_TEMP_MATCH(TARGET, PROBE) && !PIN_EXISTS(TEMP_PROBE)
|
||||
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be PROBE without TEMP_PROBE_PIN defined."
|
||||
#elif REDUNDANT_TEMP_MATCH(TARGET, COOLER) && !PIN_EXISTS(TEMP_COOLER)
|
||||
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be COOLER without TEMP_COOLER_PIN defined."
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_REDUNDANT_IS_MAX_TC && TEMP_SENSOR_REDUNDANT_SOURCE == 0 && !PIN_EXISTS(TEMP_0_CS)
|
||||
#error "TEMP_SENSOR_REDUNDANT MAX Thermocouple with TEMP_SENSOR_REDUNDANT_SOURCE 0 requires TEMP_0_CS_PIN."
|
||||
#elif TEMP_SENSOR_REDUNDANT_IS_MAX_TC && TEMP_SENSOR_REDUNDANT_SOURCE == 1 && !PIN_EXISTS(TEMP_1_CS)
|
||||
#error "TEMP_SENSOR_REDUNDANT MAX Thermocouple with TEMP_SENSOR_REDUNDANT_SOURCE 1 requires TEMP_1_CS_PIN."
|
||||
#if TEMP_SENSOR_REDUNDANT_IS_MAX_TC && REDUNDANT_TEMP_MATCH(SOURCE, E0) && !PIN_EXISTS(TEMP_0_CS)
|
||||
#error "TEMP_SENSOR_REDUNDANT MAX Thermocouple with TEMP_SENSOR_REDUNDANT_SOURCE E0 requires TEMP_0_CS_PIN."
|
||||
#elif TEMP_SENSOR_REDUNDANT_IS_MAX_TC && REDUNDANT_TEMP_MATCH(SOURCE, E1) && !PIN_EXISTS(TEMP_1_CS)
|
||||
#error "TEMP_SENSOR_REDUNDANT MAX Thermocouple with TEMP_SENSOR_REDUNDANT_SOURCE E1 requires TEMP_1_CS_PIN."
|
||||
#endif
|
||||
#endif
|
||||
|
||||
@@ -2209,6 +2211,28 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_PROBE
|
||||
#if !PIN_EXISTS(TEMP_PROBE)
|
||||
#error "TEMP_SENSOR_PROBE requires TEMP_PROBE_PIN."
|
||||
#elif !HAS_TEMP_ADC_PROBE
|
||||
#error "TEMP_PROBE_PIN must be an ADC pin."
|
||||
#elif DISABLED(FIX_MOUNTED_PROBE)
|
||||
#error "TEMP_SENSOR_PROBE shouldn't be set without FIX_MOUNTED_PROBE."
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_BOARD
|
||||
#if !PIN_EXISTS(TEMP_BOARD)
|
||||
#error "TEMP_SENSOR_BOARD requires TEMP_BOARD_PIN."
|
||||
#elif !HAS_TEMP_ADC_BOARD
|
||||
#error "TEMP_BOARD_PIN must be an ADC pin."
|
||||
#elif ENABLED(THERMAL_PROTECTION_BOARD) && (!defined(BOARD_MINTEMP) || !defined(BOARD_MAXTEMP))
|
||||
#error "THERMAL_PROTECTION_BOARD requires BOARD_MINTEMP and BOARD_MAXTEMP."
|
||||
#endif
|
||||
#elif CONTROLLER_FAN_MIN_BOARD_TEMP
|
||||
#error "CONTROLLER_FAN_MIN_BOARD_TEMP requires TEMP_SENSOR_BOARD."
|
||||
#endif
|
||||
|
||||
#if ENABLED(LASER_COOLANT_FLOW_METER) && !(PIN_EXISTS(FLOWMETER) && ENABLED(LASER_FEATURE))
|
||||
#error "LASER_COOLANT_FLOW_METER requires FLOWMETER_PIN and LASER_FEATURE."
|
||||
#endif
|
||||
|
||||
Reference in New Issue
Block a user