thebears/marlin_skr
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Format some pins files

Browse Source
This commit is contained in:
Scott Lahteine
2020-03-21 21:13:19 -05:00
committed by Scott Lahteine
parent 9340a33980
commit 2c325c2a7d
174 changed files with 9635 additions and 9668 deletions
Download Patch File Download Diff File Expand all files Collapse all files

114
Marlin/src/pins/stm32f1/pins_LONGER3D_LK.h
View File

@@ -29,20 +29,20 @@
#endif
#define BOARD_INFO_NAME "Longer3D"
#define ALFAWISE_UX0 // Common to all Longer3D STM32F1 boards (used for Open drain mosfets)
#define ALFAWISE_UX0 // Common to all Longer3D STM32F1 boards (used for Open drain mosfets)
//#define DISABLE_DEBUG // We still want to debug with STLINK...
#define DISABLE_JTAG // We free the jtag pins (PA15) but keep STLINK
// Release PB4 (STEP_X_PIN) from JTAG NRST role.
//#define DISABLE_DEBUG // We still want to debug with STLINK...
#define DISABLE_JTAG // We free the jtag pins (PA15) but keep STLINK
// Release PB4 (STEP_X_PIN) from JTAG NRST role.
//
// Limit Switches
//
#define X_MIN_PIN PC1 // pin 16
#define X_MAX_PIN PC0 // pin 15 (Filament sensor on Alfawise setup)
#define Y_MIN_PIN PC15 // pin 9
#define Y_MAX_PIN PC14 // pin 8 (Unused in stock Alfawise setup)
#define Z_MIN_PIN PE6 // pin 5 Standard Endstop or Z_Probe endstop function
#define Z_MAX_PIN PE5 // pin 4 (Unused in stock Alfawise setup)
#define X_MIN_PIN PC1 // pin 16
#define X_MAX_PIN PC0 // pin 15 (Filament sensor on Alfawise setup)
#define Y_MIN_PIN PC15 // pin 9
#define Y_MAX_PIN PC14 // pin 8 (Unused in stock Alfawise setup)
#define Z_MIN_PIN PE6 // pin 5 Standard Endstop or Z_Probe endstop function
#define Z_MAX_PIN PE5 // pin 4 (Unused in stock Alfawise setup)
// May be used for BLTouch Servo function on older variants (<= V08)
#define ONBOARD_ENDSTOPPULLUPS
@@ -50,60 +50,60 @@
// Filament Sensor
//
#ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN PC0 // XMAX plug on PCB used as filament runout sensor on Alfawise boards (inverting true)
#define FIL_RUNOUT_PIN PC0 // XMAX plug on PCB used as filament runout sensor on Alfawise boards (inverting true)
#endif
//
// Steppers
//
#define X_ENABLE_PIN PB5 // pin 91
#define X_STEP_PIN PB4 // pin 90
#define X_DIR_PIN PB3 // pin 89
#define X_ENABLE_PIN PB5 // pin 91
#define X_STEP_PIN PB4 // pin 90
#define X_DIR_PIN PB3 // pin 89
#define Y_ENABLE_PIN PB8 // pin 95
#define Y_STEP_PIN PB7 // pin 93
#define Y_DIR_PIN PB6 // pin 92
#define Y_ENABLE_PIN PB8 // pin 95
#define Y_STEP_PIN PB7 // pin 93
#define Y_DIR_PIN PB6 // pin 92
#define Z_ENABLE_PIN PE1 // pin 98
#define Z_STEP_PIN PE0 // pin 97
#define Z_DIR_PIN PB9 // pin 96
#define Z_ENABLE_PIN PE1 // pin 98
#define Z_STEP_PIN PE0 // pin 97
#define Z_DIR_PIN PB9 // pin 96
#define E0_ENABLE_PIN PE4 // pin 3
#define E0_STEP_PIN PE3 // pin 2
#define E0_DIR_PIN PE2 // pin 1
#define E0_ENABLE_PIN PE4 // pin 3
#define E0_STEP_PIN PE3 // pin 2
#define E0_DIR_PIN PE2 // pin 1
//
// Temperature Sensors
//
#define TEMP_0_PIN PA0 // pin 23 (Nozzle 100K/3950 thermistor)
#define TEMP_BED_PIN PA1 // pin 24 (Hot Bed 100K/3950 thermistor)
#define TEMP_0_PIN PA0 // pin 23 (Nozzle 100K/3950 thermistor)
#define TEMP_BED_PIN PA1 // pin 24 (Hot Bed 100K/3950 thermistor)
//
// Heaters / Fans
//
#define HEATER_0_PIN PD3 // pin 84 (Nozzle Heat Mosfet)
#define HEATER_BED_PIN PA8 // pin 67 (Hot Bed Mosfet)
#define HEATER_0_PIN PD3 // pin 84 (Nozzle Heat Mosfet)
#define HEATER_BED_PIN PA8 // pin 67 (Hot Bed Mosfet)
#define FAN_PIN PA15 // pin 77 (4cm Fan)
#define FAN_SOFT_PWM // Required to avoid issues with heating or STLink
#define FAN_MIN_PWM 35 // Fan will not start in 1-30 range
#define FAN_MAX_PWM 255
#define FAN_PIN PA15 // pin 77 (4cm Fan)
#define FAN_SOFT_PWM // Required to avoid issues with heating or STLink
#define FAN_MIN_PWM 35 // Fan will not start in 1-30 range
#define FAN_MAX_PWM 255
//#define BEEPER_PIN PD13 // pin 60 (Servo PWM output 5V/GND on Board V0G+) made for BL-Touch sensor
//#define BEEPER_PIN PD13 // pin 60 (Servo PWM output 5V/GND on Board V0G+) made for BL-Touch sensor
// Can drive a PC Buzzer, if connected between PWM and 5V pins
#define LED_PIN PC2 // pin 17
#define LED_PIN PC2 // pin 17
//
// PWM for a servo probe
// Other servo devices are not supported on this board!
//
#if HAS_Z_SERVO_PROBE
#define SERVO0_PIN PD13 // Open drain PWM pin on the V0G (GND or floating 5V)
#define SERVO0_PWM_OD // Comment this if using PE5
#define SERVO0_PIN PD13 // Open drain PWM pin on the V0G (GND or floating 5V)
#define SERVO0_PWM_OD // Comment this if using PE5
//#define SERVO0_PIN PE5 // Pulled up PWM pin on the V08 (3.3V or 0)
//#undef Z_MAX_PIN // Uncomment if using ZMAX connector (PE5)
//#define SERVO0_PIN PE5 // Pulled up PWM pin on the V08 (3.3V or 0)
//#undef Z_MAX_PIN // Uncomment if using ZMAX connector (PE5)
#endif
/**
@@ -118,17 +118,17 @@
* because Marlin uses the reset as a failsafe to revive a glitchy LCD.
*/
#define LCD_RESET_PIN PC4 // pin 33
#define LCD_BACKLIGHT_PIN PD12 // pin 59
#define FSMC_CS_PIN PD7 // pin 88 = FSMC_NE1
#define FSMC_RS_PIN PD11 // pin 58 A16 Register. Only one address needed
#define LCD_RESET_PIN PC4 // pin 33
#define LCD_BACKLIGHT_PIN PD12 // pin 59
#define FSMC_CS_PIN PD7 // pin 88 = FSMC_NE1
#define FSMC_RS_PIN PD11 // pin 58 A16 Register. Only one address needed
#define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT
#define FSMC_DMA_DEV DMA2
#define FSMC_DMA_CHANNEL DMA_CH5
#define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT
#define FSMC_DMA_DEV DMA2
#define FSMC_DMA_CHANNEL DMA_CH5
#define DOGLCD_MOSI -1 // Prevent auto-define by Conditionals_post.h
#define DOGLCD_SCK -1
#define DOGLCD_MOSI -1 // Prevent auto-define by Conditionals_post.h
#define DOGLCD_SCK -1
/**
* Note: Alfawise U20/U30 boards DON'T use SPI2, as the hardware designer
@@ -136,11 +136,11 @@
* declared below.
*/
#if ENABLED(TOUCH_BUTTONS)
#define TOUCH_CS_PIN PB12 // pin 51 SPI2_NSS
#define TOUCH_SCK_PIN PB13 // pin 52
#define TOUCH_MOSI_PIN PB14 // pin 53
#define TOUCH_MISO_PIN PB15 // pin 54
#define TOUCH_INT_PIN PC6 // pin 63 (PenIRQ coming from ADS7843)
#define TOUCH_CS_PIN PB12 // pin 51 SPI2_NSS
#define TOUCH_SCK_PIN PB13 // pin 52
#define TOUCH_MOSI_PIN PB14 // pin 53
#define TOUCH_MISO_PIN PB15 // pin 54
#define TOUCH_INT_PIN PC6 // pin 63 (PenIRQ coming from ADS7843)
#endif
//
@@ -153,12 +153,12 @@
#undef E2END
#if ENABLED(SPI_EEPROM)
// SPI1 EEPROM Winbond W25Q64 (8MB/64Mbits)
#define SPI_CHAN_EEPROM1 1
#define SPI_EEPROM1_CS PC5 // pin 34
#define EEPROM_SCK BOARD_SPI1_SCK_PIN // PA5 pin 30
#define EEPROM_MISO BOARD_SPI1_MISO_PIN // PA6 pin 31
#define EEPROM_MOSI BOARD_SPI1_MOSI_PIN // PA7 pin 32
#define EEPROM_PAGE_SIZE 0x1000U // 4KB (from datasheet)
#define SPI_CHAN_EEPROM1 1
#define SPI_EEPROM1_CS PC5 // pin 34
#define EEPROM_SCK BOARD_SPI1_SCK_PIN // PA5 pin 30
#define EEPROM_MISO BOARD_SPI1_MISO_PIN // PA6 pin 31
#define EEPROM_MOSI BOARD_SPI1_MOSI_PIN // PA7 pin 32
#define EEPROM_PAGE_SIZE 0x1000U // 4KB (from datasheet)
#define E2END ((16 * EEPROM_PAGE_SIZE)-1) // Limit to 64KB for now...
#elif ENABLED(FLASH_EEPROM_EMULATION)
// SoC Flash (framework-arduinoststm32-maple/STM32F1/libraries/EEPROM/EEPROM.h)