thebears/marlin_skr
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Format some pins files

Browse Source
This commit is contained in:
Scott Lahteine
2020-03-21 21:13:19 -05:00
committed by Scott Lahteine
parent 9340a33980
commit 2c325c2a7d
174 changed files with 9635 additions and 9668 deletions
Download Patch File Download Diff File Expand all files Collapse all files

82
Marlin/src/pins/stm32f1/pins_JGAURORA_A5S_A1.h
View File

@@ -42,10 +42,10 @@
// #define MCU_STM32F103ZE // not yet required
// Enable EEPROM Emulation for this board, so that we don't overwrite factory data
//#define I2C_EEPROM // AT24C64
//#define E2END 0x7FFF // 64KB
//#define I2C_EEPROM // AT24C64
//#define E2END 0x7FFF // 64KB
//#define FLASH_EEPROM_EMULATION
//#define E2END 0xFFF // 4KB
//#define E2END 0xFFF // 4KB
//#define E2END uint32(EEPROM_START_ADDRESS + (EEPROM_PAGE_SIZE * 2) - 1)
//#define EEPROM_CHITCHAT
//#define DEBUG_EEPROM_READWRITE
@@ -53,78 +53,78 @@
//
// Limit Switches
//
#define X_STOP_PIN PC6
#define Y_STOP_PIN PG8
#define Z_STOP_PIN PG7
//#define X_MAX_PIN PC5
//#define Y_MAX_PIN PC4
//#define Z_MAX_PIN PB0
#define X_STOP_PIN PC6
#define Y_STOP_PIN PG8
#define Z_STOP_PIN PG7
//#define X_MAX_PIN PC5
//#define Y_MAX_PIN PC4
//#define Z_MAX_PIN PB0
//
// Steppers
//
#define X_STEP_PIN PD6
#define X_DIR_PIN PD3
#define X_ENABLE_PIN PG9
#define X_STEP_PIN PD6
#define X_DIR_PIN PD3
#define X_ENABLE_PIN PG9
#define Y_STEP_PIN PG12
#define Y_DIR_PIN PG11
#define Y_ENABLE_PIN PG13
#define Y_STEP_PIN PG12
#define Y_DIR_PIN PG11
#define Y_ENABLE_PIN PG13
#define Z_STEP_PIN PG15
#define Z_DIR_PIN PG14
#define Z_ENABLE_PIN PB8
#define Z_STEP_PIN PG15
#define Z_DIR_PIN PG14
#define Z_ENABLE_PIN PB8
#define E0_STEP_PIN PE2
#define E0_DIR_PIN PB9
#define E0_ENABLE_PIN PE3
#define E0_STEP_PIN PE2
#define E0_DIR_PIN PB9
#define E0_ENABLE_PIN PE3
#define E1_STEP_PIN PE5
#define E1_DIR_PIN PE4
#define E1_ENABLE_PIN PE6
#define E1_STEP_PIN PE5
#define E1_DIR_PIN PE4
#define E1_ENABLE_PIN PE6
//
// Temperature Sensors
//
#define TEMP_0_PIN PC2
#define TEMP_BED_PIN PC1
#define TEMP_0_PIN PC2
#define TEMP_BED_PIN PC1
//
// Heaters / Fans
//
#define HEATER_0_PIN PA2
#define HEATER_BED_PIN PA3
#define HEATER_0_PIN PA2
#define HEATER_BED_PIN PA3
#define FAN_PIN PA1
#define FAN_PIN PA1
#define FIL_RUNOUT_PIN PC7
#define FIL_RUNOUT_PIN PC7
//
// LCD
//
#define LCD_BACKLIGHT_PIN PF11
#define FSMC_CS_PIN PD7
#define FSMC_RS_PIN PG0
#define LCD_BACKLIGHT_PIN PF11
#define FSMC_CS_PIN PD7
#define FSMC_RS_PIN PG0
#define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT
#define FSMC_DMA_DEV DMA2
#define FSMC_DMA_CHANNEL DMA_CH5
#define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT
#define FSMC_DMA_DEV DMA2
#define FSMC_DMA_CHANNEL DMA_CH5
//
// SD Card
//
#define SD_DETECT_PIN PF10
#define SD_DETECT_PIN PF10
//
// Misc.
//
#define BEEPER_PIN PC3 // use PB7 to shut up if desired
#define LED_PIN PC13
#define BEEPER_PIN PC3 // use PB7 to shut up if desired
#define LED_PIN PC13
//
// Touch support
//
#if ENABLED(TOUCH_BUTTONS)
#define TOUCH_CS_PIN PA4
#define TOUCH_INT_PIN PC4
#define TOUCH_CS_PIN PA4
#define TOUCH_INT_PIN PC4
#endif