BigTreeTech GTR V1.0 / Support 8 extruders, heaters, temp sensors, fans (#16595)
This commit is contained in:
yangwenxiong
committed by
Scott Lahteine
Scott Lahteine
parent
0d166f9c7d
commit
248b7dfa59
@@ -341,7 +341,7 @@
|
||||
* Temp Sensor defines
|
||||
*/
|
||||
|
||||
#define ANY_TEMP_SENSOR_IS(n) (TEMP_SENSOR_0 == (n) || TEMP_SENSOR_1 == (n) || TEMP_SENSOR_2 == (n) || TEMP_SENSOR_3 == (n) || TEMP_SENSOR_4 == (n) || TEMP_SENSOR_5 == (n) || TEMP_SENSOR_BED == (n) || TEMP_SENSOR_PROBE == (n) || TEMP_SENSOR_CHAMBER == (n))
|
||||
#define ANY_TEMP_SENSOR_IS(n) (TEMP_SENSOR_0 == (n) || TEMP_SENSOR_1 == (n) || TEMP_SENSOR_2 == (n) || TEMP_SENSOR_3 == (n) || TEMP_SENSOR_4 == (n) || TEMP_SENSOR_5 == (n) || TEMP_SENSOR_6 == (n) || TEMP_SENSOR_7 == (n) || TEMP_SENSOR_BED == (n) || TEMP_SENSOR_PROBE == (n) || TEMP_SENSOR_CHAMBER == (n))
|
||||
|
||||
#define HAS_USER_THERMISTORS ANY_TEMP_SENSOR_IS(1000)
|
||||
|
||||
@@ -483,6 +483,44 @@
|
||||
#undef HEATER_5_MAXTEMP
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_6 == -4
|
||||
#define HEATER_6_USES_AD8495
|
||||
#elif TEMP_SENSOR_6 == -3
|
||||
#error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_6."
|
||||
#elif TEMP_SENSOR_6 == -2
|
||||
#error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_6."
|
||||
#elif TEMP_SENSOR_6 == -1
|
||||
#define HEATER_6_USES_AD595
|
||||
#elif TEMP_SENSOR_6 > 0
|
||||
#define THERMISTOR_HEATER_6 TEMP_SENSOR_6
|
||||
#define HEATER_6_USES_THERMISTOR
|
||||
#if TEMP_SENSOR_6 == 1000
|
||||
#define HEATER_6_USER_THERMISTOR
|
||||
#endif
|
||||
#else
|
||||
#undef HEATER_6_MINTEMP
|
||||
#undef HEATER_6_MAXTEMP
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_7 == -4
|
||||
#define HEATER_7_USES_AD8495
|
||||
#elif TEMP_SENSOR_7 == -3
|
||||
#error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_7."
|
||||
#elif TEMP_SENSOR_7 == -2
|
||||
#error "MAX7775 Thermocouples (-2) not supported for TEMP_SENSOR_7."
|
||||
#elif TEMP_SENSOR_7 == -1
|
||||
#define HEATER_7_USES_AD595
|
||||
#elif TEMP_SENSOR_7 > 0
|
||||
#define THERMISTOR_HEATER_7 TEMP_SENSOR_7
|
||||
#define HEATER_7_USES_THERMISTOR
|
||||
#if TEMP_SENSOR_7 == 1000
|
||||
#define HEATER_7_USER_THERMISTOR
|
||||
#endif
|
||||
#else
|
||||
#undef HEATER_7_MINTEMP
|
||||
#undef HEATER_7_MAXTEMP
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_BED == -4
|
||||
#define HEATER_BED_USES_AD8495
|
||||
#elif TEMP_SENSOR_BED == -3
|
||||
@@ -538,8 +576,8 @@
|
||||
#endif
|
||||
|
||||
#define HOTEND_USES_THERMISTOR ANY( \
|
||||
HEATER_0_USES_THERMISTOR, HEATER_1_USES_THERMISTOR, HEATER_2_USES_THERMISTOR, \
|
||||
HEATER_3_USES_THERMISTOR, HEATER_4_USES_THERMISTOR, HEATER_5_USES_THERMISTOR)
|
||||
HEATER_0_USES_THERMISTOR, HEATER_1_USES_THERMISTOR, HEATER_2_USES_THERMISTOR, HEATER_3_USES_THERMISTOR, \
|
||||
HEATER_4_USES_THERMISTOR, HEATER_5_USES_THERMISTOR, HEATER_6_USES_THERMISTOR, HEATER_7_USES_THERMISTOR )
|
||||
|
||||
/**
|
||||
* Default hotend offsets, if not defined
|
||||
@@ -1025,6 +1063,18 @@
|
||||
#define HAS_E5_MICROSTEPS (PIN_EXISTS(E5_MS1))
|
||||
#define HAS_SOLENOID_5 (PIN_EXISTS(SOL5))
|
||||
|
||||
#define HAS_E6_ENABLE (PIN_EXISTS(E6_ENABLE) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E6)))
|
||||
#define HAS_E6_DIR (PIN_EXISTS(E6_DIR))
|
||||
#define HAS_E6_STEP (PIN_EXISTS(E6_STEP))
|
||||
#define HAS_E6_MICROSTEPS (PIN_EXISTS(E6_MS1))
|
||||
#define HAS_SOLENOID_6 (PIN_EXISTS(SOL6))
|
||||
|
||||
#define HAS_E7_ENABLE (PIN_EXISTS(E7_ENABLE) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E7)))
|
||||
#define HAS_E7_DIR (PIN_EXISTS(E7_DIR))
|
||||
#define HAS_E7_STEP (PIN_EXISTS(E7_STEP))
|
||||
#define HAS_E7_MICROSTEPS (PIN_EXISTS(E7_MS1))
|
||||
#define HAS_SOLENOID_7 (PIN_EXISTS(SOL7))
|
||||
|
||||
// Trinamic Stepper Drivers
|
||||
#if HAS_TRINAMIC
|
||||
#define STEALTHCHOP_ENABLED ANY(STEALTHCHOP_XY, STEALTHCHOP_Z, STEALTHCHOP_E)
|
||||
@@ -1095,6 +1145,8 @@
|
||||
#define HAS_TEMP_ADC_3 HAS_ADC_TEST(3)
|
||||
#define HAS_TEMP_ADC_4 HAS_ADC_TEST(4)
|
||||
#define HAS_TEMP_ADC_5 HAS_ADC_TEST(5)
|
||||
#define HAS_TEMP_ADC_6 HAS_ADC_TEST(6)
|
||||
#define HAS_TEMP_ADC_7 HAS_ADC_TEST(7)
|
||||
#define HAS_TEMP_ADC_BED HAS_ADC_TEST(BED)
|
||||
#define HAS_TEMP_ADC_PROBE HAS_ADC_TEST(PROBE)
|
||||
#define HAS_TEMP_ADC_CHAMBER HAS_ADC_TEST(CHAMBER)
|
||||
@@ -1118,6 +1170,8 @@
|
||||
#define HAS_HEATER_3 (PIN_EXISTS(HEATER_3))
|
||||
#define HAS_HEATER_4 (PIN_EXISTS(HEATER_4))
|
||||
#define HAS_HEATER_5 (PIN_EXISTS(HEATER_5))
|
||||
#define HAS_HEATER_6 (PIN_EXISTS(HEATER_6))
|
||||
#define HAS_HEATER_7 (PIN_EXISTS(HEATER_7))
|
||||
#define HAS_HEATER_BED (PIN_EXISTS(HEATER_BED))
|
||||
|
||||
// Shorthand for common combinations
|
||||
@@ -1146,12 +1200,14 @@
|
||||
#define HAS_AUTO_FAN_3 (HOTENDS > 3 && PIN_EXISTS(E3_AUTO_FAN))
|
||||
#define HAS_AUTO_FAN_4 (HOTENDS > 4 && PIN_EXISTS(E4_AUTO_FAN))
|
||||
#define HAS_AUTO_FAN_5 (HOTENDS > 5 && PIN_EXISTS(E5_AUTO_FAN))
|
||||
#define HAS_AUTO_FAN_6 (HOTENDS > 6 && PIN_EXISTS(E6_AUTO_FAN))
|
||||
#define HAS_AUTO_FAN_7 (HOTENDS > 7 && PIN_EXISTS(E7_AUTO_FAN))
|
||||
#define HAS_AUTO_CHAMBER_FAN (HAS_TEMP_CHAMBER && PIN_EXISTS(CHAMBER_AUTO_FAN))
|
||||
|
||||
#define HAS_AUTO_FAN (HAS_AUTO_FAN_0 || HAS_AUTO_FAN_1 || HAS_AUTO_FAN_2 || HAS_AUTO_FAN_3 || HAS_AUTO_FAN_4 || HAS_AUTO_FAN_5 || HAS_AUTO_CHAMBER_FAN)
|
||||
#define HAS_AUTO_FAN (HAS_AUTO_FAN_0 || HAS_AUTO_FAN_1 || HAS_AUTO_FAN_2 || HAS_AUTO_FAN_3 || HAS_AUTO_FAN_4 || HAS_AUTO_FAN_5 || HAS_AUTO_FAN_6 || HAS_AUTO_FAN_7 || HAS_AUTO_CHAMBER_FAN)
|
||||
#define _FANOVERLAP(A,B) (A##_AUTO_FAN_PIN == E##B##_AUTO_FAN_PIN)
|
||||
#if HAS_AUTO_FAN
|
||||
#define AUTO_CHAMBER_IS_E (_FANOVERLAP(CHAMBER,0) || _FANOVERLAP(CHAMBER,1) || _FANOVERLAP(CHAMBER,2) || _FANOVERLAP(CHAMBER,3) || _FANOVERLAP(CHAMBER,4) || _FANOVERLAP(CHAMBER,5))
|
||||
#define AUTO_CHAMBER_IS_E (_FANOVERLAP(CHAMBER,0) || _FANOVERLAP(CHAMBER,1) || _FANOVERLAP(CHAMBER,2) || _FANOVERLAP(CHAMBER,3) || _FANOVERLAP(CHAMBER,4) || _FANOVERLAP(CHAMBER,5) || _FANOVERLAP(CHAMBER,6) || _FANOVERLAP(CHAMBER,7))
|
||||
#endif
|
||||
|
||||
#if !HAS_TEMP_SENSOR
|
||||
@@ -1164,8 +1220,14 @@
|
||||
|
||||
// Other fans
|
||||
#define HAS_FAN0 (PIN_EXISTS(FAN))
|
||||
#define HAS_FAN1 (PIN_EXISTS(FAN1) && CONTROLLER_FAN_PIN != FAN1_PIN && E0_AUTO_FAN_PIN != FAN1_PIN && E1_AUTO_FAN_PIN != FAN1_PIN && E2_AUTO_FAN_PIN != FAN1_PIN && E3_AUTO_FAN_PIN != FAN1_PIN && E4_AUTO_FAN_PIN != FAN1_PIN && E5_AUTO_FAN_PIN != FAN1_PIN)
|
||||
#define HAS_FAN2 (PIN_EXISTS(FAN2) && CONTROLLER_FAN_PIN != FAN2_PIN && E0_AUTO_FAN_PIN != FAN2_PIN && E1_AUTO_FAN_PIN != FAN2_PIN && E2_AUTO_FAN_PIN != FAN2_PIN && E3_AUTO_FAN_PIN != FAN2_PIN && E4_AUTO_FAN_PIN != FAN2_PIN && E5_AUTO_FAN_PIN != FAN2_PIN)
|
||||
#define _HAS_FAN(P) (PIN_EXISTS(FAN_##P) && CONTROLLER_FAN_PIN != FAN_##P##_PIN && E0_AUTO_FAN_PIN != FAN_##P##_PIN && E1_AUTO_FAN_PIN != FAN_##P##_PIN && E2_AUTO_FAN_PIN != FAN_##P##_PIN && E3_AUTO_FAN_PIN != FAN_##P##_PIN && E4_AUTO_FAN_PIN != FAN_##P##_PIN && E5_AUTO_FAN_PIN != FAN_##P##_PIN && E6_AUTO_FAN_PIN != FAN_##P##_PIN && E7_AUTO_FAN_PIN != FAN_##P##_PIN)
|
||||
#define HAS_FAN1 _HAS_FAN(1)
|
||||
#define HAS_FAN2 _HAS_FAN(2)
|
||||
#define HAS_FAN3 _HAS_FAN(3)
|
||||
#define HAS_FAN4 _HAS_FAN(4)
|
||||
#define HAS_FAN5 _HAS_FAN(5)
|
||||
#define HAS_FAN6 _HAS_FAN(6)
|
||||
#define HAS_FAN7 _HAS_FAN(7)
|
||||
#define HAS_CONTROLLER_FAN (PIN_EXISTS(CONTROLLER_FAN))
|
||||
|
||||
// Servos
|
||||
@@ -1203,7 +1265,7 @@
|
||||
#define HAS_MOTOR_CURRENT_PWM ANY_PIN(MOTOR_CURRENT_PWM_X, MOTOR_CURRENT_PWM_Y, MOTOR_CURRENT_PWM_XY, MOTOR_CURRENT_PWM_Z, MOTOR_CURRENT_PWM_E)
|
||||
|
||||
#define HAS_SOME_Z_MICROSTEPS (HAS_Z_MICROSTEPS || HAS_Z2_MICROSTEPS || HAS_Z3_MICROSTEPS || HAS_Z4_MICROSTEPS)
|
||||
#define HAS_SOME_E_MICROSTEPS (HAS_E0_MICROSTEPS || HAS_E1_MICROSTEPS || HAS_E2_MICROSTEPS || HAS_E3_MICROSTEPS || HAS_E4_MICROSTEPS || HAS_E5_MICROSTEPS)
|
||||
#define HAS_SOME_E_MICROSTEPS (HAS_E0_MICROSTEPS || HAS_E1_MICROSTEPS || HAS_E2_MICROSTEPS || HAS_E3_MICROSTEPS || HAS_E4_MICROSTEPS || HAS_E5_MICROSTEPS || HAS_E6_MICROSTEPS || HAS_E7_MICROSTEPS)
|
||||
#define HAS_MICROSTEPS (HAS_X_MICROSTEPS || HAS_X2_MICROSTEPS || HAS_Y_MICROSTEPS || HAS_Y2_MICROSTEPS || HAS_SOME_Z_MICROSTEPS || HAS_SOME_E_MICROSTEPS)
|
||||
|
||||
#if HAS_MICROSTEPS
|
||||
@@ -1278,26 +1340,27 @@
|
||||
#if HAS_HEATER_0 && !defined(HEATER_0_INVERTING)
|
||||
#define HEATER_0_INVERTING false
|
||||
#endif
|
||||
|
||||
#if HAS_HEATER_1 && !defined(HEATER_1_INVERTING)
|
||||
#define HEATER_1_INVERTING false
|
||||
#endif
|
||||
|
||||
#if HAS_HEATER_2 && !defined(HEATER_2_INVERTING)
|
||||
#define HEATER_2_INVERTING false
|
||||
#endif
|
||||
|
||||
#if HAS_HEATER_3 && !defined(HEATER_3_INVERTING)
|
||||
#define HEATER_3_INVERTING false
|
||||
#endif
|
||||
|
||||
#if HAS_HEATER_4 && !defined(HEATER_4_INVERTING)
|
||||
#define HEATER_4_INVERTING false
|
||||
#endif
|
||||
|
||||
#if HAS_HEATER_5 && !defined(HEATER_5_INVERTING)
|
||||
#define HEATER_5_INVERTING false
|
||||
#endif
|
||||
#if HAS_HEATER_6 && !defined(HEATER_6_INVERTING)
|
||||
#define HEATER_6_INVERTING false
|
||||
#endif
|
||||
#if HAS_HEATER_7 && !defined(HEATER_7_INVERTING)
|
||||
#define HEATER_7_INVERTING false
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Helper Macros for heaters and extruder fan
|
||||
@@ -1314,6 +1377,12 @@
|
||||
#define WRITE_HEATER_4(v) WRITE(HEATER_4_PIN, (v) ^ HEATER_4_INVERTING)
|
||||
#if HOTENDS > 5
|
||||
#define WRITE_HEATER_5(v) WRITE(HEATER_5_PIN, (v) ^ HEATER_5_INVERTING)
|
||||
#if HOTENDS > 6
|
||||
#define WRITE_HEATER_6(v) WRITE(HEATER_6_PIN, (v) ^ HEATER_6_INVERTING)
|
||||
#if HOTENDS > 7
|
||||
#define WRITE_HEATER_7(v) WRITE(HEATER_7_PIN, (v) ^ HEATER_7_INVERTING)
|
||||
#endif // HOTENDS > 7
|
||||
#endif // HOTENDS > 6
|
||||
#endif // HOTENDS > 5
|
||||
#endif // HOTENDS > 4
|
||||
#endif // HOTENDS > 3
|
||||
@@ -1365,7 +1434,17 @@
|
||||
#define FAN_INVERTING false
|
||||
#endif
|
||||
|
||||
#if HAS_FAN2
|
||||
#if HAS_FAN7
|
||||
#define FAN_COUNT 8
|
||||
#elif HAS_FAN6
|
||||
#define FAN_COUNT 7
|
||||
#elif HAS_FAN5
|
||||
#define FAN_COUNT 6
|
||||
#elif HAS_FAN4
|
||||
#define FAN_COUNT 5
|
||||
#elif HAS_FAN3
|
||||
#define FAN_COUNT 4
|
||||
#elif HAS_FAN2
|
||||
#define FAN_COUNT 3
|
||||
#elif HAS_FAN1
|
||||
#define FAN_COUNT 2
|
||||
@@ -1640,7 +1719,6 @@
|
||||
#define HAS_FIXED_3POINT
|
||||
#endif
|
||||
|
||||
|
||||
/**
|
||||
* Buzzer/Speaker
|
||||
*/
|
||||
|
||||
Reference in New Issue
Block a user