🔧 Config INI, dump options (#24528)

2022-08-04 02:38:15 -05:00
parent 1c4fc4603a
commit 1bed10c380
17 changed files with 1326 additions and 97 deletions
--- a/Marlin/base.ini
+++ b/Marlin/base.ini
@@ -0,0 +1,107 @@
+#
+# Marlin Firmware
+# base.ini - A base ini to include for testing
+#
+[config:base]
+motherboard                              = BOARD_RAMPS_14_EFB
+serial_port                              = 0
+baudrate                                 = 250000
+
+use_watchdog                             = on
+thermal_protection_hotends               = on
+thermal_protection_hysteresis            = 4
+thermal_protection_period                = 40
+
+bufsize                                  = 4
+block_buffer_size                        = 16
+max_cmd_size                             = 96
+
+extruders                                = 1
+temp_sensor_0                            = 1
+
+temp_hysteresis                          = 3
+heater_0_mintemp                         = 5
+heater_0_maxtemp                         = 275
+preheat_1_temp_hotend                    = 180
+
+bang_max                                 = 255
+pidtemp                                  = on
+pid_k1                                   = 0.95
+pid_max                                  = BANG_MAX
+pid_functional_range                     = 10
+
+default_kp                               = 22.20
+default_ki                               = 1.08
+default_kd                               = 114.00
+
+x_driver_type                            = A4988
+y_driver_type                            = A4988
+z_driver_type                            = A4988
+e0_driver_type                           = A4988
+
+x_bed_size                               = 200
+x_min_pos                                = 0
+x_max_pos                                = X_BED_SIZE
+
+y_bed_size                               = 200
+y_min_pos                                = 0
+y_max_pos                                = Y_BED_SIZE
+
+z_min_pos                                = 0
+z_max_pos                                = 200
+
+x_home_dir                               = -1
+y_home_dir                               = -1
+z_home_dir                               = -1
+
+use_xmin_plug                            = on
+use_ymin_plug                            = on
+use_zmin_plug                            = on
+
+x_min_endstop_inverting                  = false
+y_min_endstop_inverting                  = false
+z_min_endstop_inverting                  = false
+
+default_axis_steps_per_unit              = { 80, 80, 400, 500 }
+axis_relative_modes                      = { false, false, false, false }
+default_max_feedrate                     = { 300, 300, 5, 25 }
+default_max_acceleration                 = { 3000, 3000, 100, 10000 }
+
+homing_feedrate_mm_m                     = { (50*60), (50*60), (4*60) }
+homing_bump_divisor                      = { 2, 2, 4 }
+
+x_enable_on                              = 0
+y_enable_on                              = 0
+z_enable_on                              = 0
+e_enable_on                              = 0
+
+invert_x_dir                             = false
+invert_y_dir                             = true
+invert_z_dir                             = false
+invert_e0_dir                            = false
+
+invert_e_step_pin                        = false
+invert_x_step_pin                        = false
+invert_y_step_pin                        = false
+invert_z_step_pin                        = false
+
+disable_x                                = false
+disable_y                                = false
+disable_z                                = false
+disable_e                                = false
+
+proportional_font_ratio                  = 1.0
+default_nominal_filament_dia             = 1.75
+
+junction_deviation_mm                    = 0.013
+
+default_acceleration                     = 3000
+default_travel_acceleration              = 3000
+default_retract_acceleration             = 3000
+
+default_minimumfeedrate                  = 0.0
+default_mintravelfeedrate                = 0.0
+
+minimum_planner_speed                    = 0.05
+min_steps_per_segment                    = 6
+default_minsegmenttime                   = 20000