thebears/marlin_skr
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Pins cleanup

Browse Source
This commit is contained in:
Scott Lahteine
2019-07-11 04:51:47 -05:00
parent 42be684e69
commit 179095c387
39 changed files with 123 additions and 124 deletions
Download Patch File Download Diff File Expand all files Collapse all files

18
Marlin/src/pins/ramps/pins_RAMPS.h
View File

@@ -169,9 +169,9 @@
// SPI for Max6675 or Max31855 Thermocouple
#if DISABLED(SDSUPPORT)
#define MAX6675_SS_PIN 66 // Do not use pin 53 if there is even the remote possibility of using Display/SD card
#define MAX6675_SS_PIN 66 // Don't use 53 if there is even the remote possibility of using Display/SD card
#else
#define MAX6675_SS_PIN 66 // Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present
#define MAX6675_SS_PIN 66 // Don't use 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present
#endif
//
@@ -262,9 +262,9 @@
#if ENABLED(CASE_LIGHT_ENABLE) && !defined(CASE_LIGHT_PIN) && !defined(SPINDLE_LASER_ENA_PIN)
#if NUM_SERVOS <= 1 // try to use servo connector first
#define CASE_LIGHT_PIN 6 // MUST BE HARDWARE PWM
#define CASE_LIGHT_PIN 6 // Hardware PWM
#elif AUX2_PINS_FREE
#define CASE_LIGHT_PIN 44 // MUST BE HARDWARE PWM
#define CASE_LIGHT_PIN 44 // Hardware PWM
#endif
#endif
@@ -273,12 +273,12 @@
//
#if HAS_CUTTER && !defined(SPINDLE_LASER_ENA_PIN)
#if !NUM_SERVOS // Use servo connector if possible
#define SPINDLE_LASER_ENA_PIN 4 // Pin should have a pullup/pulldown!
#define SPINDLE_LASER_PWM_PIN 6 // MUST BE HARDWARE PWM
#define SPINDLE_LASER_ENA_PIN 4 // Pullup or pulldown!
#define SPINDLE_LASER_PWM_PIN 6 // Hardware PWM
#define SPINDLE_DIR_PIN 5
#elif AUX2_PINS_FREE
#define SPINDLE_LASER_ENA_PIN 40 // Pin should have a pullup/pulldown!
#define SPINDLE_LASER_PWM_PIN 44 // MUST BE HARDWARE PWM
#define SPINDLE_LASER_ENA_PIN 40 // Pullup or pulldown!
#define SPINDLE_LASER_PWM_PIN 44 // Hardware PWM
#define SPINDLE_DIR_PIN 65
#else
#error "No auto-assignable Spindle/Laser pins available."
@@ -621,7 +621,7 @@
// Beeper on AUX-4
#define BEEPER_PIN 33
// Buttons are directly attached using AUX-2
// Buttons are directly attached to AUX-2
#if ENABLED(REPRAPWORLD_KEYPAD)
#define SHIFT_OUT 40
#define SHIFT_CLK 44