Code changes supporting up to 6 extruders
This commit is contained in:
Scott Lahteine
@@ -273,19 +273,19 @@
|
||||
#elif defined(HAVE_L6470DRIVER)
|
||||
#error "HAVE_L6470DRIVER is now [AXIS]_DRIVER_TYPE L6470. Please update your Configuration.h."
|
||||
#elif defined(X_IS_TMC) || defined(X2_IS_TMC) || defined(Y_IS_TMC) || defined(Y2_IS_TMC) || defined(Z_IS_TMC) || defined(Z2_IS_TMC) || defined(Z3_IS_TMC) \
|
||||
|| defined(E0_IS_TMC) || defined(E1_IS_TMC) || defined(E2_IS_TMC) || defined(E3_IS_TMC) || defined(E4_IS_TMC)
|
||||
|| defined(E0_IS_TMC) || defined(E1_IS_TMC) || defined(E2_IS_TMC) || defined(E3_IS_TMC) || defined(E4_IS_TMC) || defined(E5_IS_TMC)
|
||||
#error "[AXIS]_IS_TMC is now [AXIS]_DRIVER_TYPE TMC26X. Please update your Configuration.h."
|
||||
#elif defined(X_IS_TMC26X) || defined(X2_IS_TMC26X) || defined(Y_IS_TMC26X) || defined(Y2_IS_TMC26X) || defined(Z_IS_TMC26X) || defined(Z2_IS_TMC26X) || defined(Z3_IS_TMC26X) \
|
||||
|| defined(E0_IS_TMC26X) || defined(E1_IS_TMC26X) || defined(E2_IS_TMC26X) || defined(E3_IS_TMC26X) || defined(E4_IS_TMC26X)
|
||||
|| defined(E0_IS_TMC26X) || defined(E1_IS_TMC26X) || defined(E2_IS_TMC26X) || defined(E3_IS_TMC26X) || defined(E4_IS_TMC26X) || defined(E5_IS_TMC26X)
|
||||
#error "[AXIS]_IS_TMC26X is now [AXIS]_DRIVER_TYPE TMC26X. Please update your Configuration.h."
|
||||
#elif defined(X_IS_TMC2130) || defined(X2_IS_TMC2130) || defined(Y_IS_TMC2130) || defined(Y2_IS_TMC2130) || defined(Z_IS_TMC2130) || defined(Z2_IS_TMC2130) || defined(Z3_IS_TMC2130) \
|
||||
|| defined(E0_IS_TMC2130) || defined(E1_IS_TMC2130) || defined(E2_IS_TMC2130) || defined(E3_IS_TMC2130) || defined(E4_IS_TMC2130)
|
||||
|| defined(E0_IS_TMC2130) || defined(E1_IS_TMC2130) || defined(E2_IS_TMC2130) || defined(E3_IS_TMC2130) || defined(E4_IS_TMC2130) || defined(E5_IS_TMC2130)
|
||||
#error "[AXIS]_IS_TMC2130 is now [AXIS]_DRIVER_TYPE TMC2130. Please update your Configuration.h."
|
||||
#elif defined(X_IS_TMC2208) || defined(X2_IS_TMC2208) || defined(Y_IS_TMC2208) || defined(Y2_IS_TMC2208) || defined(Z_IS_TMC2208) || defined(Z2_IS_TMC2208) || defined(Z3_IS_TMC2208) \
|
||||
|| defined(E0_IS_TMC2208) || defined(E1_IS_TMC2208) || defined(E2_IS_TMC2208) || defined(E3_IS_TMC2208) || defined(E4_IS_TMC2208)
|
||||
|| defined(E0_IS_TMC2208) || defined(E1_IS_TMC2208) || defined(E2_IS_TMC2208) || defined(E3_IS_TMC2208) || defined(E4_IS_TMC2208) || defined(E5_IS_TMC2208)
|
||||
#error "[AXIS]_IS_TMC2208 is now [AXIS]_DRIVER_TYPE TMC2208. Please update your Configuration.h."
|
||||
#elif defined(X_IS_L6470) || defined(X2_IS_L6470) || defined(Y_IS_L6470) || defined(Y2_IS_L6470) || defined(Z_IS_L6470) || defined(Z2_IS_L6470) || defined(Z3_IS_L6470) \
|
||||
|| defined(E0_IS_L6470) || defined(E1_IS_L6470) || defined(E2_IS_L6470) || defined(E3_IS_L6470) || defined(E4_IS_L6470)
|
||||
|| defined(E0_IS_L6470) || defined(E1_IS_L6470) || defined(E2_IS_L6470) || defined(E3_IS_L6470) || defined(E4_IS_L6470) || defined(E5_IS_L6470)
|
||||
#error "[AXIS]_IS_L6470 is now [AXIS]_DRIVER_TYPE L6470. Please update your Configuration.h."
|
||||
#elif defined(AUTOMATIC_CURRENT_CONTROL)
|
||||
#error "AUTOMATIC_CURRENT_CONTROL is now MONITOR_DRIVER_STATUS. Please update your configuration."
|
||||
@@ -534,6 +534,8 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE,
|
||||
#error "FILAMENT_RUNOUT_SENSOR with NUM_RUNOUT_SENSORS > 3 requires FIL_RUNOUT4_PIN."
|
||||
#elif NUM_RUNOUT_SENSORS > 4 && !PIN_EXISTS(FIL_RUNOUT5)
|
||||
#error "FILAMENT_RUNOUT_SENSOR with NUM_RUNOUT_SENSORS > 4 requires FIL_RUNOUT5_PIN."
|
||||
#elif NUM_RUNOUT_SENSORS > 5 && !PIN_EXISTS(FIL_RUNOUT6)
|
||||
#error "FILAMENT_RUNOUT_SENSOR with NUM_RUNOUT_SENSORS > 5 requires FIL_RUNOUT6_PIN."
|
||||
#elif DISABLED(SDSUPPORT) && DISABLED(PRINTJOB_TIMER_AUTOSTART)
|
||||
#error "FILAMENT_RUNOUT_SENSOR requires SDSUPPORT or PRINTJOB_TIMER_AUTOSTART."
|
||||
#elif DISABLED(ADVANCED_PAUSE_FEATURE)
|
||||
@@ -1242,13 +1244,28 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE,
|
||||
#elif !PIN_EXISTS(TEMP_4)
|
||||
#error "TEMP_4_PIN not defined for this board."
|
||||
#endif
|
||||
#if HOTENDS > 5
|
||||
#if TEMP_SENSOR_5 == 0
|
||||
#error "TEMP_SENSOR_5 is required with 5 HOTENDS."
|
||||
#elif !HAS_HEATER_5
|
||||
#error "HEATER_5_PIN not defined for this board."
|
||||
#elif !PIN_EXISTS(TEMP_5)
|
||||
#error "TEMP_5_PIN not defined for this board."
|
||||
#endif
|
||||
#elif TEMP_SENSOR_5 != 0
|
||||
#error "TEMP_SENSOR_5 shouldn't be set with only 5 HOTENDS."
|
||||
#endif
|
||||
#elif TEMP_SENSOR_4 != 0
|
||||
#error "TEMP_SENSOR_4 shouldn't be set with only 4 HOTENDS."
|
||||
#elif TEMP_SENSOR_5 != 0
|
||||
#error "TEMP_SENSOR_5 shouldn't be set with only 5 HOTENDS."
|
||||
#endif
|
||||
#elif TEMP_SENSOR_3 != 0
|
||||
#error "TEMP_SENSOR_3 shouldn't be set with only 3 HOTENDS."
|
||||
#elif TEMP_SENSOR_4 != 0
|
||||
#error "TEMP_SENSOR_4 shouldn't be set with only 3 HOTENDS."
|
||||
#elif TEMP_SENSOR_5 != 0
|
||||
#error "TEMP_SENSOR_5 shouldn't be set with only 4 HOTENDS."
|
||||
#endif
|
||||
#elif TEMP_SENSOR_2 != 0
|
||||
#error "TEMP_SENSOR_2 shouldn't be set with only 2 HOTENDS."
|
||||
@@ -1256,6 +1273,8 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE,
|
||||
#error "TEMP_SENSOR_3 shouldn't be set with only 2 HOTENDS."
|
||||
#elif TEMP_SENSOR_4 != 0
|
||||
#error "TEMP_SENSOR_4 shouldn't be set with only 2 HOTENDS."
|
||||
#elif TEMP_SENSOR_5 != 0
|
||||
#error "TEMP_SENSOR_5 shouldn't be set with only 2 HOTENDS."
|
||||
#endif
|
||||
#elif TEMP_SENSOR_1 != 0 && DISABLED(TEMP_SENSOR_1_AS_REDUNDANT)
|
||||
#error "TEMP_SENSOR_1 shouldn't be set with only 1 HOTEND."
|
||||
@@ -1265,6 +1284,8 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE,
|
||||
#error "TEMP_SENSOR_3 shouldn't be set with only 1 HOTEND."
|
||||
#elif TEMP_SENSOR_4 != 0
|
||||
#error "TEMP_SENSOR_4 shouldn't be set with only 1 HOTEND."
|
||||
#elif TEMP_SENSOR_5 != 0
|
||||
#error "TEMP_SENSOR_5 shouldn't be set with only 1 HOTEND."
|
||||
#endif
|
||||
|
||||
#if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT) && TEMP_SENSOR_1 == 0
|
||||
@@ -1306,23 +1327,36 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE,
|
||||
* Test Extruder Stepper Pins
|
||||
*/
|
||||
#if DISABLED(MK2_MULTIPLEXER) // MK2_MULTIPLEXER uses E0 stepper only
|
||||
#if E_STEPPERS > 4
|
||||
#if !(PIN_EXISTS(E4_STEP) && PIN_EXISTS(E4_DIR) && PIN_EXISTS(E4_ENABLE))
|
||||
#error "E4_STEP_PIN, E4_DIR_PIN, or E4_ENABLE_PIN not defined for this board."
|
||||
#if E_STEPPERS
|
||||
#if !(PIN_EXISTS(E0_STEP) && PIN_EXISTS(E0_DIR) && PIN_EXISTS(E0_ENABLE))
|
||||
#error "E0_STEP_PIN, E0_DIR_PIN, or E0_ENABLE_PIN not defined for this board."
|
||||
#endif
|
||||
#elif E_STEPPERS > 3
|
||||
#if !(PIN_EXISTS(E3_STEP) && PIN_EXISTS(E3_DIR) && PIN_EXISTS(E3_ENABLE))
|
||||
#error "E3_STEP_PIN, E3_DIR_PIN, or E3_ENABLE_PIN not defined for this board."
|
||||
#endif
|
||||
#elif E_STEPPERS > 2
|
||||
#if !(PIN_EXISTS(E2_STEP) && PIN_EXISTS(E2_DIR) && PIN_EXISTS(E2_ENABLE))
|
||||
#error "E2_STEP_PIN, E2_DIR_PIN, or E2_ENABLE_PIN not defined for this board."
|
||||
#endif
|
||||
#elif E_STEPPERS > 1
|
||||
#if !(PIN_EXISTS(E1_STEP) && PIN_EXISTS(E1_DIR) && PIN_EXISTS(E1_ENABLE))
|
||||
#error "E1_STEP_PIN, E1_DIR_PIN, or E1_ENABLE_PIN not defined for this board."
|
||||
#endif
|
||||
#endif
|
||||
#if E_STEPPERS > 1
|
||||
#if !(PIN_EXISTS(E1_STEP) && PIN_EXISTS(E1_DIR) && PIN_EXISTS(E1_ENABLE))
|
||||
#error "E1_STEP_PIN, E1_DIR_PIN, or E1_ENABLE_PIN not defined for this board."
|
||||
#endif
|
||||
#if E_STEPPERS > 2
|
||||
#if !(PIN_EXISTS(E2_STEP) && PIN_EXISTS(E2_DIR) && PIN_EXISTS(E2_ENABLE))
|
||||
#error "E2_STEP_PIN, E2_DIR_PIN, or E2_ENABLE_PIN not defined for this board."
|
||||
#endif
|
||||
#if E_STEPPERS > 3
|
||||
#if !(PIN_EXISTS(E3_STEP) && PIN_EXISTS(E3_DIR) && PIN_EXISTS(E3_ENABLE))
|
||||
#error "E3_STEP_PIN, E3_DIR_PIN, or E3_ENABLE_PIN not defined for this board."
|
||||
#endif
|
||||
#if E_STEPPERS > 4
|
||||
#if !(PIN_EXISTS(E4_STEP) && PIN_EXISTS(E4_DIR) && PIN_EXISTS(E4_ENABLE))
|
||||
#error "E4_STEP_PIN, E4_DIR_PIN, or E4_ENABLE_PIN not defined for this board."
|
||||
#endif
|
||||
#if E_STEPPERS > 5
|
||||
#if !(PIN_EXISTS(E5_STEP) && PIN_EXISTS(E5_DIR) && PIN_EXISTS(E5_ENABLE))
|
||||
#error "E5_STEP_PIN, E5_DIR_PIN, or E5_ENABLE_PIN not defined for this board."
|
||||
#endif
|
||||
#endif // E_STEPPERS > 5
|
||||
#endif // E_STEPPERS > 4
|
||||
#endif // E_STEPPERS > 3
|
||||
#endif // E_STEPPERS > 2
|
||||
#endif // E_STEPPERS > 1
|
||||
#endif // E_STEPPERS
|
||||
#endif
|
||||
|
||||
/**
|
||||
@@ -1625,6 +1659,8 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE,
|
||||
#error "E3_CS_PIN is required for TMC2130. Define E3_CS_PIN in Configuration_adv.h."
|
||||
#elif AXIS_DRIVER_TYPE(E4, TMC2130) && !PIN_EXISTS(E4_CS)
|
||||
#error "E4_CS_PIN is required for TMC2130. Define E4_CS_PIN in Configuration_adv.h."
|
||||
#elif AXIS_DRIVER_TYPE(E5, TMC2130) && !PIN_EXISTS(E5_CS)
|
||||
#error "E5_CS_PIN is required for TMC2130. Define E5_CS_PIN in Configuration_adv.h."
|
||||
#endif
|
||||
|
||||
/**
|
||||
@@ -1642,8 +1678,9 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE,
|
||||
|| defined(E1_HARDWARE_SERIAL) \
|
||||
|| defined(E2_HARDWARE_SERIAL) \
|
||||
|| defined(E3_HARDWARE_SERIAL) \
|
||||
|| defined(E4_HARDWARE_SERIAL) )
|
||||
#error "select hardware UART for TMC2208 to use both TMC2208 and ENDSTOP_INTERRUPTS_FEATURE."
|
||||
|| defined(E4_HARDWARE_SERIAL) \
|
||||
|| defined(E5_HARDWARE_SERIAL) )
|
||||
#error "Select hardware UART for TMC2208 to use both TMC2208 and ENDSTOP_INTERRUPTS_FEATURE."
|
||||
#endif
|
||||
|
||||
/**
|
||||
@@ -1660,7 +1697,8 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE,
|
||||
|| defined(E1_HARDWARE_SERIAL) \
|
||||
|| defined(E2_HARDWARE_SERIAL) \
|
||||
|| defined(E3_HARDWARE_SERIAL) \
|
||||
|| defined(E4_HARDWARE_SERIAL) )
|
||||
|| defined(E4_HARDWARE_SERIAL) \
|
||||
|| defined(E5_HARDWARE_SERIAL) )
|
||||
#error "TMC2208 Software Serial is supported only on AVR and LPC1768 platforms."
|
||||
#endif
|
||||
|
||||
|
||||
Reference in New Issue
Block a user