Move 'pins' files

2017-09-06 06:28:31 -05:00
parent 2b3b7d5d7f
commit 0b9a88d6ce
79 changed files with 0 additions and 0 deletions
--- a/Marlin/src/pins/pins_RAMPS_OLD.h
+++ b/Marlin/src/pins/pins_RAMPS_OLD.h
@@ -0,0 +1,111 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Arduino Mega with RAMPS v1.0, v1.1, v1.2 pin assignments
+ */
+
+#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
+  #error "Oops!  Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
+#endif
+
+#define BOARD_NAME         "MEGA/RAMPS <1.2"
+
+// Uncomment the following line for RAMPS v1.0
+//#define RAMPS_V_1_0
+
+//
+// Limit Switches
+//
+#define X_MIN_PIN           3
+#define X_MAX_PIN           2
+#define Y_MIN_PIN          16
+#define Y_MAX_PIN          17
+#define Z_MIN_PIN          18
+#define Z_MAX_PIN          19
+
+//
+// Z Probe (when not Z_MIN_PIN)
+//
+#ifndef Z_MIN_PROBE_PIN
+  #define Z_MIN_PROBE_PIN  19
+#endif
+
+//
+// Steppers
+//
+#define X_STEP_PIN         26
+#define X_DIR_PIN          28
+#define X_ENABLE_PIN       24
+
+#define Y_STEP_PIN         38
+#define Y_DIR_PIN          40
+#define Y_ENABLE_PIN       36
+
+#define Z_STEP_PIN         44
+#define Z_DIR_PIN          46
+#define Z_ENABLE_PIN       42
+
+#define E0_STEP_PIN        32
+#define E0_DIR_PIN         34
+#define E0_ENABLE_PIN      30
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN          2   // Analog Input
+#define TEMP_BED_PIN        1   // Analog Input
+
+// SPI for Max6675 or Max31855 Thermocouple
+#if DISABLED(SDSUPPORT)
+  #define MAX6675_SS       66 // Do not use pin 53 if there is even the remote possibility of using Display/SD card
+#else
+  #define MAX6675_SS       66 // Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present
+#endif
+
+//
+// Heaters / Fans
+//
+#if ENABLED(RAMPS_V_1_0)
+  #define HEATER_0_PIN     12
+  #define HEATER_BED_PIN   -1
+  #define FAN_PIN          11
+#else // RAMPS_V_1_1 or RAMPS_V_1_2
+  #define HEATER_0_PIN     10
+  #define HEATER_BED_PIN    8
+  #define FAN_PIN           9
+#endif
+
+//
+// Misc. Functions
+//
+#define SDPOWER            48
+#define SDSS               53
+#define LED_PIN            13
+#define CASE_LIGHT_PIN     45     // MUST BE HARDWARE PWM
+
+//
+// M3/M4/M5 - Spindle/Laser Control
+//
+#define SPINDLE_LASER_ENABLE_PIN 41  // Pin should have a pullup/pulldown!
+#define SPINDLE_LASER_PWM_PIN    45  // MUST BE HARDWARE PWM
+#define SPINDLE_DIR_PIN          43