Eryone Thinker V2 (#21190)

Co-Authored-By: Bryan Joshua Pedini <b.pedini@bjphoster.com>
2021-02-25 09:14:24 -06:00
parent 735c1b6183
commit 08d54b3d78
5 changed files with 89 additions and 8 deletions
--- a/Marlin/src/pins/rambo/pins_RAMBO_THINKERV2.h
+++ b/Marlin/src/pins/rambo/pins_RAMBO_THINKERV2.h
@@ -0,0 +1,60 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Rambo ThinkerV2 pin assignments
+ */
+
+#define BOARD_INFO_NAME "Rambo ThinkerV2"
+
+#define SERVO0_PIN                             4  // Motor header MX1
+#define SERVO2_PIN                            -1  // Motor header MX3
+
+#ifndef FIL_RUNOUT_PIN
+  #define FIL_RUNOUT_PIN                      10
+#endif
+
+// Support BLTouch and fixed probes
+#if ENABLED(BLTOUCH)
+  #if ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
+    #define Z_MIN_PIN                         22
+  #elif !defined(Z_MIN_PROBE_PIN)
+    #define Z_MIN_PROBE_PIN                   22
+  #endif
+#elif ENABLED(FIX_MOUNTED_PROBE)
+  #if ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
+    #define Z_MIN_PIN                          4
+  #elif !defined(Z_MIN_PROBE_PIN)
+    #define Z_MIN_PROBE_PIN                    4
+  #endif
+#endif
+
+// Eryone has the fan pins reversed
+#define FAN1_PIN                               2
+#define FAN2_PIN                               6
+
+// Encoder
+#define BTN_EN1                               64
+#define BTN_EN2                               63
+
+#include "pins_RAMBO.h"