Split up STM32 pins files (#17212)

2020-03-20 23:45:00 -05:00
parent 3151856e98
commit 04cea864bc
45 changed files with 42 additions and 42 deletions
--- a/Marlin/src/pins/stm32f1/pins_JGAURORA_A5S_A1.h
+++ b/Marlin/src/pins/stm32f1/pins_JGAURORA_A5S_A1.h
@@ -0,0 +1,130 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+ /**
+  *  ╦╔═╗╔═╗┬ ┬┬─┐┌─┐┬─┐┌─┐╔═╗┌─┐┬─┐┬ ┬┌┬┐ ┌─┐┌─┐┌┬┐
+  *  ║║ ╦╠═╣│ │├┬┘│ │├┬┘├─┤╠╣ │ │├┬┘│ ││││ │  │ ││││
+  * ╚╝╚═╝╩ ╩└─┘┴└─└─┘┴└─┴ ┴╚  └─┘┴└─└─┘┴ ┴o└─┘└─┘┴ ┴
+  *   Pin assignments for 32-bit JGAurora A5S & A1
+  */
+
+#ifndef __STM32F1__
+  #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
+#elif HOTENDS > 1 || E_STEPPERS > 1
+  #error "JGAurora 32-bit board only supports 1 hotend / E-stepper. Comment out this line to continue."
+#endif
+#define BOARD_INFO_NAME "JGAurora A5S A1 board"
+
+#ifndef STM32_XL_DENSITY
+  #define STM32_XL_DENSITY
+#endif
+
+// #define MCU_STM32F103ZE // not yet required
+// Enable EEPROM Emulation for this board, so that we don't overwrite factory data
+
+//#define I2C_EEPROM   // AT24C64
+//#define E2END 0x7FFF // 64KB
+//#define FLASH_EEPROM_EMULATION
+//#define E2END 0xFFF // 4KB
+//#define E2END uint32(EEPROM_START_ADDRESS + (EEPROM_PAGE_SIZE * 2) - 1)
+//#define EEPROM_CHITCHAT
+//#define DEBUG_EEPROM_READWRITE
+
+//
+// Limit Switches
+//
+#define X_STOP_PIN         PC6
+#define Y_STOP_PIN         PG8
+#define Z_STOP_PIN         PG7
+//#define X_MAX_PIN          PC5
+//#define Y_MAX_PIN          PC4
+//#define Z_MAX_PIN          PB0
+
+//
+// Steppers
+//
+#define X_STEP_PIN         PD6
+#define X_DIR_PIN          PD3
+#define X_ENABLE_PIN       PG9
+
+#define Y_STEP_PIN         PG12
+#define Y_DIR_PIN          PG11
+#define Y_ENABLE_PIN       PG13
+
+#define Z_STEP_PIN         PG15
+#define Z_DIR_PIN          PG14
+#define Z_ENABLE_PIN       PB8
+
+#define E0_STEP_PIN        PE2
+#define E0_DIR_PIN         PB9
+#define E0_ENABLE_PIN      PE3
+
+#define E1_STEP_PIN        PE5
+#define E1_DIR_PIN         PE4
+#define E1_ENABLE_PIN      PE6
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN         PC2
+#define TEMP_BED_PIN       PC1
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN       PA2
+#define HEATER_BED_PIN     PA3
+
+#define FAN_PIN            PA1
+
+#define FIL_RUNOUT_PIN     PC7
+
+//
+// LCD
+//
+#define LCD_BACKLIGHT_PIN  PF11
+#define FSMC_CS_PIN        PD7
+#define FSMC_RS_PIN        PG0
+
+#define LCD_USE_DMA_FSMC          // Use DMA transfers to send data to the TFT
+#define FSMC_DMA_DEV       DMA2
+#define FSMC_DMA_CHANNEL   DMA_CH5
+
+//
+// SD Card
+//
+#define SD_DETECT_PIN      PF10
+
+//
+// Misc.
+//
+#define BEEPER_PIN         PC3    // use PB7 to shut up if desired
+#define LED_PIN            PC13
+
+//
+// Touch support
+//
+#if ENABLED(TOUCH_BUTTONS)
+  #define TOUCH_CS_PIN     PA4
+  #define TOUCH_INT_PIN    PC4
+#endif