Split up STM32 pins files (#17212)

2020-03-20 23:45:00 -05:00
parent 3151856e98
commit 04cea864bc
45 changed files with 42 additions and 42 deletions
--- a/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h
+++ b/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h
@@ -0,0 +1,151 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#ifndef __STM32F1__
+  #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
+#endif
+
+#define DEFAULT_MACHINE_NAME "3D Printer"
+
+#define BOARD_INFO_NAME   "FYSETC Cheetah"
+#define BOARD_WEBSITE_URL "fysetc.com"
+
+// Ignore temp readings during development.
+//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000
+
+#define DISABLE_JTAG
+
+#define FLASH_EEPROM_EMULATION
+#define EEPROM_PAGE_SIZE     uint16(0x800) // 2KB
+#define EEPROM_START_ADDRESS uint32(0x8000000 + 256 * 1024 - 2 * EEPROM_PAGE_SIZE)
+#undef E2END
+#define E2END                (EEPROM_PAGE_SIZE - 1) // 2KB
+
+//
+// Servos
+//
+#define SERVO0_PIN         PA0
+
+//
+// Limit Switches
+//
+#define X_STOP_PIN         PA1
+#define Y_STOP_PIN         PB4
+#define Z_STOP_PIN         PA15
+
+//
+// Filament runout
+//
+#define FIL_RUNOUT_PIN     PB5
+
+//
+// Steppers
+//
+#define X_STEP_PIN         PB8
+#define X_DIR_PIN          PB9
+#define X_ENABLE_PIN       PA8
+
+#define Y_STEP_PIN         PB2
+#define Y_DIR_PIN          PB3
+#define Y_ENABLE_PIN       PB1
+
+#define Z_STEP_PIN         PC0
+#define Z_DIR_PIN          PC1
+#define Z_ENABLE_PIN       PC2
+
+#define E0_STEP_PIN        PC15
+#define E0_DIR_PIN         PC14
+#define E0_ENABLE_PIN      PC13
+
+#define X_HARDWARE_SERIAL  MSerial2
+#define Y_HARDWARE_SERIAL  MSerial2
+#define Z_HARDWARE_SERIAL  MSerial2
+#define E0_HARDWARE_SERIAL MSerial2
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN       PC6
+#define HEATER_BED_PIN     PC7
+#ifndef FAN_PIN
+  #define FAN_PIN          PC8
+#endif
+
+//
+// Temperature Sensors
+//
+#define TEMP_BED_PIN       PC5   // Analog Input
+#define TEMP_0_PIN         PC4   // Analog Input
+
+//
+// Misc. Functions
+//
+#define SDSS               PA4
+
+//
+// LCD Pins
+//
+#if HAS_SPI_LCD
+
+  #define BEEPER_PIN       PC9
+
+  #if HAS_GRAPHICAL_LCD
+    #define DOGLCD_A0      PB14
+    #define DOGLCD_CS      PB12
+    #define DOGLCD_SCK     PB13
+    #define DOGLCD_MOSI    PB15
+    //#define LCD_SCREEN_ROT_90
+    //#define LCD_SCREEN_ROT_180
+    //#define LCD_SCREEN_ROT_270
+
+    #if EITHER(FYSETC_MINI_12864, U8GLIB_ST7920)
+      #define FORCE_SOFT_SPI
+    #endif
+  #endif
+
+  #define LCD_PINS_RS      PB12   // CS -- SOFT SPI for ENDER3 LCD
+  #define LCD_PINS_D4      PB13   // SCLK
+  #define LCD_PINS_ENABLE  PB15   // DATA MOSI
+
+  // not connected to a pin
+  #define SD_DETECT_PIN    PC3
+
+  #ifndef RGB_LED_R_PIN
+    #define RGB_LED_R_PIN  PB0
+  #endif
+  #ifndef RGB_LED_G_PIN
+    #define RGB_LED_G_PIN  PB7
+  #endif
+  #ifndef RGB_LED_B_PIN
+    #define RGB_LED_B_PIN  PB6
+  #endif
+
+  //#define LCD_CONTRAST_INIT 190
+
+  #if ENABLED(NEWPANEL)
+    #define BTN_EN1        PC11
+    #define BTN_EN2        PC10
+    #define BTN_ENC        PC12
+  #endif
+
+#endif