import os
import importlib as ir
from cadquery import exporters as et
root_dir = r'C:\\Users\\TheBears\\Seafile\\Designs\\Projects\\kickdrawers\\cadfree\\code'
os.chdir(root_dir)

import items as it
import math
import util as u
import cadquery as cq
ir.reload(it)
ir.reload(u)

objs = list()

# Base parameters
add_the_fingers = False
r_hole = 4.6/2
add_holes = True
t_large = 3.175
box_height = 1 * 25.4
box_depth = 22*25.4
box_width = 10 * 25.4
slider_thickness = 13.28
cabinet_height = 20 * 25.4
cabinet_hole_spacing = 4.5*25.4

back_depth = 25


settings = {'w':box_width, 'd':box_depth, 'h':box_height, 
    't_large':t_large, 'add_holes':add_holes, 'r_hole':r_hole,
     'add_fingers':add_the_fingers, 'slide_flavor':'24inch',
     'slide_on_bottom': True, 'front_pts': False}

yz_wp = lambda: cq.Workplane('YZ')
xz_wp = lambda: cq.Workplane('XZ')

# Make drawers
drawer_1 = it.create_drawer(**settings ).add_tag('drawer_1');
for idx, ed in enumerate(drawer_1):
    drawer_1[idx] = ed.translate((t_large+slider_thickness,0,0))
objs.append(drawer_1)


panel_depth = box_depth + back_depth
ar1 = u.add_rect(yz_wp(), panel_depth, cabinet_height).extrude(t_large).translate((0,0,0))
ar2 = u.add_rect(yz_wp(), panel_depth, cabinet_height).extrude(t_large).translate((box_width+ 2* slider_thickness + t_large ,0,0))
ar3 = u.add_rect(xz_wp(), box_width+2*slider_thickness + 2*t_large, cabinet_height).extrude(t_large).translate((0,box_depth+back_depth,0))


for i in range(math.floor(cabinet_height/cabinet_hole_spacing)):

    pts_f = u.slide_pts(panel_depth, cabinet_hole_spacing/2, offset_from_back=47+2, spacing=(64, 351, 64))
    extr = yz_wp().pushPoints(pts_f).slot2D(10, r_hole*2).extrude(box_depth + 2*slider_thickness + 2*t_large).translate((0,0,i*cabinet_hole_spacing))
    ar1 = ar1.cut(extr)
    ar2 = ar2.cut(extr)

objs.append([ar1,ar2, ar3])


for x in objs:
    for o in x:
        show_object(o)