import os
import datetime as dt
print(str(dt.datetime.now()))

import importlib as ir
from cadquery import exporters as et
try:
    try:
        root_dir = r'C:\\Users\\TheBears\\Seafile\\Designs\\Projects\\kickdrawers\\cadfree\\code\\'
        os.chdir(root_dir)
    except:
        root_dir = r'C:\\Users\\Ishan\\Seafile\\Designs\\Projects\\kickdrawers\\cadfree\\code\\'
        os.chdir(root_dir)
except:
    root_dir = r'/home/thebears/Seafile/Designs/Projects/kickdrawers/cadfree/code'
    os.chdir(root_dir)
 
import items as it 
import util as u
import cadquery as cq
ir.reload(it)
ir.reload(u)
force_tab_width = False

objs = list()

make_drawer_2 = True

FAST = True

# Base parameters
add_the_fingers = not FAST
add_holes =  not FAST
r_hole = 4.6/2


slider_thickness = 12.7
t_small = 3.175
t_large = t_small*2
back_padding = 14
box_depth = 540 + 25.4/2
box_height = 3.15*25.4
front_offset_face = 12
prefix = 'orig'	
set_prefix = 'under_instant'
w_finder_rev = 2
truncate_box = False

#395, 39
# box_depth = 390 - 2
if w_finder_rev == 1:
    drawer_1_width = 506
    drawer_2_width = 406 - 50 - 21
    full_width = 910


    # box_width = (full_width - 4*slider_thickness - 2*t_large - 2*t_small)/2
    if make_drawer_2:
        full_width = drawer_1_width + drawer_2_width + 2*( 2*slider_thickness + t_large + t_small)
        full_1_width = drawer_1_width + 1*( 2*slider_thickness + t_large + t_small)
        full_2_width =  drawer_2_width + 1*( 2*slider_thickness + t_large + t_small)
        print(full_width,full_1_width, full_2_width)

    if not make_drawer_2:
        full_width = drawer_1_width + drawer_2_width + 2*( 2*slider_thickness + t_large + t_small) - t_large
        full_1_width = drawer_1_width + 1*( 2*slider_thickness + t_large + t_small)
        print(full_width,full_1_width) 
elif w_finder_rev == 2:
    
    full_1_width = 395 - t_small
    
    make_drawer_2 = False
    if make_drawer_2:
        full_width = full_1_width + full_2_width
        drawer_1_width  = full_1_width - 1*( 2*slider_thickness + t_large + t_small)
        drawer_2_width  = full_2_width - 1*( 2*slider_thickness + t_large + t_small)
    if not make_drawer_2:
        full_width = full_1_width
        drawer_1_width = full_1_width - 1*( 2*slider_thickness + t_large + t_small)


# Computed parameters
box_depth_w_pad = box_depth + back_padding  




z_drop = t_large + t_small
settings = { 'd':box_depth, 'h':box_height, 't_large':t_large, 'add_holes':add_holes, 'r_hole':r_hole, 'add_fingers':add_the_fingers}


xy_wp = lambda: cq.Workplane('XY')






# Make drawers
drawer_1 = it.create_drawer(w = drawer_1_width, **settings, tab_override=False ).add_tag('drawer_1');

objs.append(drawer_1)

if make_drawer_2:
    drawer_2 = it.create_drawer(w = drawer_2_width, **settings).translate(drawer_1_width+2*slider_thickness+2*t_small,0,0).add_tag('drawer_2');
    objs.append(drawer_2)


#Add back panels
xzback = lambda: cq.Workplane(cq.Plane(origin = (-slider_thickness-t_large,-back_padding-t_small,-z_drop), xDir=(1,0,0), normal=(0,-1,0)))
yzback = lambda: cq.Workplane('YZ').center(-back_padding-t_small,-z_drop)
xy_bottom = lambda: cq.Workplane(cq.Plane(origin = (-slider_thickness-t_large,-back_padding-t_small,-z_drop), xDir=(1,0,0), normal=(0,0,1)))
xyb1 = xy_bottom()
xyb2 = xy_bottom().center(full_1_width,0)

if make_drawer_2:
    bottom_1 = u.add_rect(xyb1, full_1_width, box_depth_w_pad - front_offset_face).extrude(t_small)    
    back_1 = u.add_rect(xzback(), full_1_width, box_height + z_drop).extrude(-t_small)
else:
    bottom_1 = u.add_rect(xyb1, full_1_width + t_small, box_depth_w_pad - front_offset_face).extrude(t_small)    
    back_1 = u.add_rect(xzback(), full_1_width + t_small, box_height + z_drop).extrude(-t_small)

bottom_1 = bottom_1.cut( xyb1.pushPoints(u.bottom_points(full_1_width, box_depth_w_pad, grid=[5,5])).circle(r_hole).extrude(10))
panel_a = it.add_panel(yzback(), box_depth_w_pad - front_offset_face, box_height, z_drop, r_hole, -t_small, t_small).translate((-slider_thickness, 0, 0))
panel_b = it.add_panel(yzback(), box_depth_w_pad - front_offset_face, box_height, z_drop, r_hole, t_small, t_small).translate((drawer_1_width+slider_thickness, 0, 0))


if make_drawer_2:
    bottom_2 = u.add_rect(xyb2, full_2_width, box_depth_w_pad - front_offset_face).extrude(t_small)
    bottom_2 = bottom_2.cut( xyb2.pushPoints(u.bottom_points(full_2_width, box_depth_w_pad, grid=(5,5))).circle(r_hole).extrude(10))
    back_2 = u.add_rect(xzback().center(full_1_width,0), full_2_width, box_height + z_drop).extrude(-t_small)
    panel_c = it.add_panel(yzback(), box_depth_w_pad - front_offset_face, box_height, z_drop, r_hole, t_small, t_small).translate((drawer_1_width+slider_thickness + t_small, 0, 0))
    panel_d = it.add_panel(yzback(), box_depth_w_pad - front_offset_face, box_height, z_drop, r_hole, t_small, t_small).translate((3*slider_thickness + (drawer_1_width + drawer_2_width) + 2*t_small, 0, 0))



if add_the_fingers:
    panel_a, bottom_1, _ = u.do_fingers(panel_a, bottom_1, num_tabs = 13)
    panel_b, bottom_1, _ = u.do_fingers(panel_b, bottom_1, num_tabs = 13)
    back_1, bottom_1, _ = u.do_fingers(back_1, bottom_1, num_tabs = 13)
    panel_a, back_1, _ = u.do_fingers(panel_a, back_1)
    panel_b, back_1, _ = u.do_fingers(panel_b, back_1)

    if make_drawer_2:
        panel_c, bottom_2, _ = u.do_fingers(panel_c, bottom_2, num_tabs = 13)
        panel_d, bottom_2, _ = u.do_fingers(panel_d, bottom_2, num_tabs = 13)
        back_2, bottom_2, _ = u.do_fingers(back_2, bottom_2, num_tabs = 13)
        panel_c, back_2, _ = u.do_fingers(panel_c, back_2)
        panel_d, back_2, _ = u.do_fingers(panel_d, back_2)


support_1 = it.item_list([back_1, bottom_1, panel_a, panel_b]).add_tag('support_1')
objs.append(support_1)

if make_drawer_2:
    support_2 = it.item_list ([back_2, bottom_2, panel_c, panel_d]).add_tag('support_2')
    objs.append(support_2)



for x in objs:
    for o in x:
        show_object(o)


u.save_stls(objs, os.path.join(root_dir,set_prefix), prefix, tolerance = 0.01)



# fitem = globals().items()
# for name, var in list(globals().items()):
#     if var in objs:
#         fpath = os.path.join(root_dir, 'base_stls', prefix +'_shell_'+ name+'.stl')
#         et.exportShape(var, et.ExportTypes.STL, open(fpath, 'w'))