yacwc

helpers_uart.c

@@ -8,6 +8,10 @@ void USART0_init(void) {
 
     USART0.BAUD = (uint16_t) USART0_BAUD_RATE(9600);
     USART0.CTRLB |= USART_TXEN_bm;
+    USART0.CTRLB |= USART_RXEN_bm;
+//    USART0.CTRLB |= USART_SFDEN_bm;
+//    USART0.CTRLA |= USART_RXSIE_bm;
+    USART0.CTRLA |= USART_RXCIE_bm;
 }
 
 void USART0_sendChar(char c) {
@@ -20,6 +24,7 @@ void USART0_sendChar(char c) {
 
 
 
+
 void USART0_sendString(const char *str) {
     for (size_t i = 0; i < strlen(str); i++) {
         USART0_sendChar(str[i]);

main.c

@@ -7,23 +7,27 @@
 #include <stdlib.h>
 #include <stdio.h>
 #include "helpers_uart.h"
-
+#include <avr/interrupt.h>
 #include <xc.h>
 #include "twi0_master_example.h"
 
+#define LISTEN_EXPANDER_COMMANDS true
+#define IGNORE_SOFT_LIMITS false
 
 #define delay_time 50
 
-// Zoom, Focus, Iris
+// Zoom -> motor 0
-struct PORT_struct *port_1[] = {&PORTA, &PORTB, &PORTC};
+// Focus -> motor 1
-struct PORT_struct *port_2[] = {&PORTA, &PORTB, &PORTC};
+// Iris -> motor 2
-struct PORT_struct *port_3[] = {&PORTA, &PORTC, &PORTC};
+struct PORT_struct *port_1[] = {&PORTB, &PORTA, &PORTC};
-struct PORT_struct *port_4[] = {&PORTA, &PORTC, &PORTC};
+struct PORT_struct *port_2[] = {&PORTB, &PORTA, &PORTC};
+struct PORT_struct *port_3[] = {&PORTC, &PORTA, &PORTC};
+struct PORT_struct *port_4[] = {&PORTC, &PORTA, &PORTC};
 
-uint8_t pin_1[] = {2, 5, 4};
+uint8_t pin_1[] = {5, 2, 4};
-uint8_t pin_2[] = {3, 4, 5};
+uint8_t pin_2[] = {4, 3, 5};
-uint8_t pin_3[] = {4, 1, 6};
+uint8_t pin_3[] = {0, 4, 6};
-uint8_t pin_4[] = {5, 0, 7};
+uint8_t pin_4[] = {1, 5, 7};
 
 uint8_t delay[] = {15, 15, 50}; // Multiples of "delay_time"
 uint16_t max_steps[] = {2994, 5180, 77};
@@ -37,28 +41,74 @@ uint8_t phase;
 
 uint8_t motor_num;
 uint8_t port_val;
+char usart_recv_char;
+bool usart_interrupt = false;
+
+
+uint8_t read_low_usart_bit(){
+	while (!(USART0.STATUS & USART_RXCIF_bm)) {
+	}
+	return USART0.RXDATAL;
+}
+uint8_t read_high_usart_bit(){
+	while (!(USART0.STATUS & USART_RXCIF_bm)) {
+	}
+	return USART0.RXDATAH;
+}	
+
+
+ISR(USART0_RXC_vect)
+{
+
+
+	usart_recv_char = read_low_usart_bit();
+	USART0_sendChar(usart_recv_char);
+
+
+
+}
+
+
+void set_ports_out()
+{
+	for (int i = 0; i<sizeof(pin_1); i++) {
+		port_1[i]->DIRSET = _BV(pin_1[i]);
+		port_2[i]->DIRSET = _BV(pin_2[i]);
+		port_3[i]->DIRSET = _BV(pin_3[i]);
+		port_4[i]->DIRSET = _BV(pin_4[i]);
+
+		port_1[i]->OUTSET = _BV(pin_1[i]);
+		port_2[i]->OUTSET = _BV(pin_2[i]);
+		port_3[i]->OUTSET = _BV(pin_3[i]);
+		port_4[i]->OUTSET = _BV(pin_4[i]);
+
+	}
+}
 
 void init_port_expander()
 {
 	I2C0_example_write1ByteRegister(32, 0x00, 0x00);
-	I2C0_example_write1ByteRegister(32, 0x00, 0x00);
+	I2C0_example_write1ByteRegister(32, 0x09, 0x00);
 }
 
 void set_expanded_port_on(uint8_t num)
 {
-	port_val = I2C0_example_read1ByteRegister(32, 0x09);
+	if (LISTEN_EXPANDER_COMMANDS) {
-	port_val |= _BV(num);
+		port_val = I2C0_example_read1ByteRegister(32, 0x09);
-	I2C0_example_write1ByteRegister(32, 0x09, port_val);
+		port_val |= _BV(num);
+		I2C0_example_write1ByteRegister(32, 0x09, port_val);
+	}
 }
 
 void set_expanded_port_off(uint8_t num)
 {
-	port_val = I2C0_example_read1ByteRegister(32, 0x09);
+	if (LISTEN_EXPANDER_COMMANDS) {
-	port_val &= ~_BV(num);
+		port_val = I2C0_example_read1ByteRegister(32, 0x09);
-	I2C0_example_write1ByteRegister(32, 0x09, port_val);
+		port_val &= ~_BV(num);
+		I2C0_example_write1ByteRegister(32, 0x09, port_val);
+	}
 }
 
-
 void battery_charging_on()
 {
 	set_expanded_port_on(0);
@@ -93,7 +143,6 @@ void power_3v3_off()
 	PORTA.OUTCLR = _BV(6);
 }
 
-
 void delay_n_units(uint8_t n)
 {
 	for (int i = 0; i < n; i++) {
@@ -133,15 +182,17 @@ void step_phased(struct PORT_struct * p1, struct PORT_struct * p2, struct PORT_s
 void step_motor(uint8_t i, int s)
 {
 
-	set_expanded_port_on(i);
+
-	for (int n = 0; i < abs(s); n++) {
+	for (int n = 0; n < abs(s); n++) {
 
 		phase = abs(current_step[i] % 4);
 		motor_max_pos = (current_step[i] >= max_steps[i]) && (s > 0);
 		motor_min_pos = (current_step[i] <= 0) && (s < 0);
 
 		if (motor_max_pos || motor_min_pos) {
-			return;
+			if (!IGNORE_SOFT_LIMITS) {
+				return;
+			}
 		}
 
 		step_phased(port_1[i], port_2[i], port_3[i], port_4[i], pin_1[i], pin_2[i], pin_3[i], pin_4[i], phase);
@@ -159,28 +210,28 @@ void step_motor(uint8_t i, int s)
 
 void step_iris_phased(int steps)
 {
-	set_expanded_port_on(2);
+	set_expanded_port_on(4);
 	step_motor(2, steps);
-	set_expanded_port_off(2);
+	set_expanded_port_off(4);
-}
-
-void step_zoom_phased(int steps)
-{
-	set_expanded_port_on(1);
-	step_motor(1, steps);
-	set_expanded_port_off(1);
 }
 
 void step_focus_phased(int steps)
 {
-	set_expanded_port_on(0);
+	set_expanded_port_on(3);
+	step_motor(1, steps);
+	set_expanded_port_off(3);
+}
+
+void step_zoom_phased(int steps)
+{
+	set_expanded_port_on(2);
 	step_motor(0, steps);
-	set_expanded_port_off(0);
+	set_expanded_port_off(2);
 }
 
 bool at_zoom_limit()
 {
-	if (PORTD.IN & PIN0_bm) {
+	if (PORTD.IN & PIN1_bm) {
 		return false;
 	} else {
 		return true;
@@ -190,7 +241,7 @@ bool at_zoom_limit()
 bool at_focus_limit()
 {
 
-	if (PORTD.IN & PIN1_bm) {
+	if (PORTD.IN & PIN0_bm) {
 		return false;
 	} else {
 		return true;
@@ -198,25 +249,14 @@ bool at_focus_limit()
 
 }
 
-void home_focus()
-{
-	motor_num = 0;
-	current_step[motor_num] = max_steps[motor_num] + 200;
-	step_motor(motor_num, -100);
-	for (int i = 0; i < max_steps[motor_num]; i++) {
-		step_motor(motor_num, -1);
-		if (at_focus_limit()) {
-			break;
-		}
-	}
-	current_step[motor_num] = 0;
-}
-
 void home_zoom()
 {
-	motor_num = 1;
+
+	motor_num = 0;
+	set_expanded_port_on(motor_num + 2);
 	current_step[motor_num] = max_steps[motor_num] + 200;
 	step_motor(motor_num, -100);
+	_delay_ms(100);
 	for (int i = 0; i < max_steps[motor_num]; i++) {
 		step_motor(motor_num, -1);
 		if (at_zoom_limit()) {
@@ -224,14 +264,34 @@ void home_zoom()
 		}
 	}
 	current_step[motor_num] = 0;
+	set_expanded_port_off(motor_num + 2);
+}
+
+void home_focus()
+{
+	motor_num = 1;
+	set_expanded_port_on(motor_num + 2);
+	current_step[motor_num] = max_steps[motor_num] + 200;
+	step_motor(motor_num, -100);
+	_delay_ms(100);
+	for (int i = 0; i < max_steps[motor_num]; i++) {
+		step_motor(motor_num, -1);
+		if (at_focus_limit()) {
+			break;
+		}
+	}
+	current_step[motor_num] = 0;
+	set_expanded_port_off(motor_num + 2);
 }
 
 void home_iris()
 {
-	motor_num = 3;
+	motor_num = 2;
+	set_expanded_port_on(motor_num + 2);
 	current_step[motor_num] = max_steps[motor_num] + 200;
 	step_motor(motor_num, -100);
 	current_step[motor_num] = 0;
+	set_expanded_port_off(motor_num + 2);
 }
 
 void ir_filter_on()
@@ -256,29 +316,38 @@ void init_pins()
 	PORTD.DIRCLR = PIN0_bm;
 	PORTD.DIRCLR = PIN1_bm;
 
+	PORTD.PIN0CTRL |= PORT_ISC_BOTHEDGES_gc;
+	PORTD.PIN1CTRL |= PORT_ISC_BOTHEDGES_gc;
+
 	// IR Filter
 	PORTB.DIRSET = _BV(2);
 	PORTB.DIRSET = _BV(3);
 
 	//i2c muxing
 	PORTMUX.TWISPIROUTEA = 0x23;
+	set_ports_out();
+
 }
 
 int main(void)
 {
+	init_pins();
 
-	I2C0_Initialize();
-	init_port_expander();
 	USART0_init();
+	I2C0_Initialize();
+	power_3v3_on();
+	init_port_expander();
+	sei();
+	if (!LISTEN_EXPANDER_COMMANDS) {
+		I2C0_example_write1ByteRegister(32, 0x09, 0xFF);
+	}
 
+	home_zoom();
+	home_focus();
+	home_iris();
 	while (1) {
-		step_zoom_phased(6000);
-		step_iris_phased(100);
-		step_focus_phased(2000);
 
-		step_zoom_phased(-6000);
+
-		step_iris_phased(-100);
-		step_focus_phased(-2000);
 	}
 	return 0;
 }

nbproject/configurations.xml

@@ -42,7 +42,7 @@
         <targetDevice>ATmega4809</targetDevice>
         <targetHeader></targetHeader>
         <targetPluginBoard></targetPluginBoard>
-        <platformTool>Simulator</platformTool>
+        <platformTool>AtmelIceTool</platformTool>
         <languageToolchain>XC8</languageToolchain>
         <languageToolchainVersion>2.32</languageToolchainVersion>
         <platform>2</platform>
@@ -200,8 +200,478 @@
         <property key="program-the-device-with-default-config-words" value="true"/>
         <property key="remove-unused-sections" value="true"/>
       </HI-TECH-LINK>
+      <Simulator>
+        <property key="codecoverage.enabled" value="Disable"/>
+        <property key="codecoverage.enableoutputtofile" value="false"/>
+        <property key="codecoverage.outputfile" value=""/>
+        <property key="oscillator.auxfrequency" value="120"/>
+        <property key="oscillator.auxfrequencyunit" value="Mega"/>
+        <property key="oscillator.frequency" value="1"/>
+        <property key="oscillator.frequencyunit" value="Mega"/>
+        <property key="oscillator.rcfrequency" value="250"/>
+        <property key="oscillator.rcfrequencyunit" value="Kilo"/>
+        <property key="periphADC1.altscl" value="false"/>
+        <property key="periphADC1.minTacq" value=""/>
+        <property key="periphADC1.tacqunits" value="microseconds"/>
+        <property key="periphADC2.altscl" value="false"/>
+        <property key="periphADC2.minTacq" value=""/>
+        <property key="periphADC2.tacqunits" value="microseconds"/>
+        <property key="periphComp1.gte" value="gt"/>
+        <property key="periphComp2.gte" value="gt"/>
+        <property key="periphComp3.gte" value="gt"/>
+        <property key="periphComp4.gte" value="gt"/>
+        <property key="periphComp5.gte" value="gt"/>
+        <property key="periphComp6.gte" value="gt"/>
+        <property key="reset.scl" value="false"/>
+        <property key="reset.type" value="MCLR"/>
+        <property key="toolpack.updateoptions"
+                  value="toolpack.updateoptions.uselatestoolpack"/>
+        <property key="toolpack.updateoptions.packversion"
+                  value="Press to select which tool pack to use"/>
+        <property key="tracecontrol.include.timestamp" value="summarydataenabled"/>
+        <property key="tracecontrol.select" value="0"/>
+        <property key="tracecontrol.stallontracebufferfull" value="false"/>
+        <property key="tracecontrol.timestamp" value="0"/>
+        <property key="tracecontrol.tracebufmax" value="546000"/>
+        <property key="tracecontrol.tracefile" value="defmplabxtrace.log"/>
+        <property key="tracecontrol.traceresetonrun" value="false"/>
+        <property key="uart0io.output" value="window"/>
+        <property key="uart0io.outputfile" value=""/>
+        <property key="uart0io.uartioenabled" value="false"/>
+        <property key="uart1io.output" value="window"/>
+        <property key="uart1io.outputfile" value=""/>
+        <property key="uart1io.uartioenabled" value="false"/>
+        <property key="uart2io.output" value="window"/>
+        <property key="uart2io.outputfile" value=""/>
+        <property key="uart2io.uartioenabled" value="false"/>
+        <property key="uart3io.output" value="window"/>
+        <property key="uart3io.outputfile" value=""/>
+        <property key="uart3io.uartioenabled" value="false"/>
+        <property key="uart4io.output" value="window"/>
+        <property key="uart4io.outputfile" value=""/>
+        <property key="uart4io.uartioenabled" value="false"/>
+        <property key="uart5io.output" value="window"/>
+        <property key="uart5io.outputfile" value=""/>
+        <property key="uart5io.uartioenabled" value="false"/>
+        <property key="uart6io.output" value="window"/>
+        <property key="uart6io.outputfile" value=""/>
+        <property key="uart6io.uartioenabled" value="false"/>
+        <property key="usart0io.output" value="window"/>
+        <property key="usart0io.outputfile" value=""/>
+        <property key="usart0io.uartioenabled" value="false"/>
+        <property key="usart1io.output" value="window"/>
+        <property key="usart1io.outputfile" value=""/>
+        <property key="usart1io.uartioenabled" value="false"/>
+        <property key="usart2io.output" value="window"/>
+        <property key="usart2io.outputfile" value=""/>
+        <property key="usart2io.uartioenabled" value="false"/>
+        <property key="usart3io.output" value="window"/>
+        <property key="usart3io.outputfile" value=""/>
+        <property key="usart3io.uartioenabled" value="false"/>
+        <property key="usart4io.output" value="window"/>
+        <property key="usart4io.outputfile" value=""/>
+        <property key="usart4io.uartioenabled" value="false"/>
+        <property key="usartc0io.output" value="window"/>
+        <property key="usartc0io.outputfile" value=""/>
+        <property key="usartc0io.uartioenabled" value="false"/>
+        <property key="usartc1io.output" value="window"/>
+        <property key="usartc1io.outputfile" value=""/>
+        <property key="usartc1io.uartioenabled" value="false"/>
+        <property key="usartd0io.output" value="window"/>
+        <property key="usartd0io.outputfile" value=""/>
+        <property key="usartd0io.uartioenabled" value="false"/>
+        <property key="usartd1io.output" value="window"/>
+        <property key="usartd1io.outputfile" value=""/>
+        <property key="usartd1io.uartioenabled" value="false"/>
+        <property key="usarte0io.output" value="window"/>
+        <property key="usarte0io.outputfile" value=""/>
+        <property key="usarte0io.uartioenabled" value="false"/>
+        <property key="usarte1io.output" value="window"/>
+        <property key="usarte1io.outputfile" value=""/>
+        <property key="usarte1io.uartioenabled" value="false"/>
+        <property key="usarte2io.output" value="window"/>
+        <property key="usarte2io.outputfile" value=""/>
+        <property key="usarte2io.uartioenabled" value="false"/>
+        <property key="usartf0io.output" value="window"/>
+        <property key="usartf0io.outputfile" value=""/>
+        <property key="usartf0io.uartioenabled" value="false"/>
+        <property key="usartf1io.output" value="window"/>
+        <property key="usartf1io.outputfile" value=""/>
+        <property key="usartf1io.uartioenabled" value="false"/>
+        <property key="warningmessagebreakoptions.W0001_CORE_BITREV_MODULO_EN"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0002_CORE_SECURE_MEMORYACCESS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0003_CORE_SW_RESET" value="report"/>
+        <property key="warningmessagebreakoptions.W0004_CORE_WDT_RESET" value="report"/>
+        <property key="warningmessagebreakoptions.W0005_CORE_IOPUW_RESET"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0006_CORE_CODE_GUARD_PFC_RESET"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0007_CORE_DO_LOOP_STACK_UNDERFLOW"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0008_CORE_DO_LOOP_STACK_OVERFLOW"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0009_CORE_NESTED_DO_LOOP_RANGE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0010_CORE_SIM32_ODD_WORDACCESS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0011_CORE_SIM32_UNIMPLEMENTED_RAMACCESS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0012_CORE_STACK_OVERFLOW_RESET"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0013_CORE_STACK_UNDERFLOW_RESET"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0014_CORE_INVALID_OPCODE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0015_CORE_INVALID_ALT_WREG_SET"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0016_CORE_STACK_ERROR"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0017_CORE_ODD_RAMWORDACCESS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0018_CORE_UNIMPLEMENTED_RAMACCESS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0019_CORE_UNIMPLEMENTED_PROMACCESS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0020_CORE_ACCESS_NOTIN_X_SPACE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0021_CORE_ACCESS_NOTIN_Y_SPACE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0022_CORE_XMODEND_LESS_XMODSRT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0023_CORE_YMODEND_LESS_YMODSRT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0024_CORE_BITREV_MOD_IS_ZERO"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0025_CORE_HARD_TRAP" value="report"/>
+        <property key="warningmessagebreakoptions.W0026_CORE_UNIMPLEMENTED_MEMORYACCESS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0027_CORE_UNIMPLEMENTED_EDSACCESS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0028_TBLRD_WORM_CONFIG_MEMORY"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0029_TBLRD_DEVICE_ID" value="report"/>
+        <property key="warningmessagebreakoptions.W0030_CORE_UNIMPLEMENTED_MEMORY_ACCESS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0031_BSLIM_INSUFFICIENT_BOOT_SEGMENT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0032_BSLIM_LIMITS_EXCEEDS_PROG_MEMORY"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0033_CORE_UNPREDICTABLE_OPCODE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0034_CORE_UNALIGNED_MEMORY_ACCESS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0035_CORE_UNIMPLEMENTED_RAMACCESS_NOTRAP"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0040_FPU_DIFF_CP10_CP11"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0041_FPU_ACCESS_DENIED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0042_FPU_PRIVILEGED_ACCESS_ONLY"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0043_FPU_CP_RESERVED_VALUE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0044_FPU_OUT_OF_RANGE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0051_INSTRUCTION_DIV_NOT_ENOUGH_REPEAT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0052_INSTRUCTION_DIV_TOO_MANY_REPEAT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0053_INVALID_INTCON_VS_FIELD_VALUE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0101_SIM_UPDATE_FAILED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0102_SIM_PERIPH_MISSING"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0103_SIM_PERIPH_FAILED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0104_SIM_FAILED_TO_INIT_TOOL"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0105_SIM_INVALID_FIELD"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0106_SIM_PERIPH_PARTIAL_SUPPORT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0107_SIM_NOT_SUPPORTED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0108_SIM_RESERVED_SETTING"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0109_SIM_PERIPHERAL_IN_DEVELOPMENT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0110_SIM_UNEXPECTED_EVENT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0111_SIM_UNSUPPORTED_SELECTION"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0112_SIM_INVALID_OPERATION"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0113_SIM_WRITE_TO_PROTECTED_SFR"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0114_SIM_INVALID_KEY" value="report"/>
+        <property key="warningmessagebreakoptions.W0115_SIM_FAILED_TO_PARSE_DEVICE_FILE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0116_SIM_STACK_OVERFLOW"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0117_SIM_STACK_UNDERFLOW"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0118_SIM_INVALID_FIELD_VALUE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0119_SIM_SAMPLING_RATE_VIOLATION"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0201_ADC_NO_STIMULUS_FILE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0202_ADC_GO_DONE_BIT" value="report"/>
+        <property key="warningmessagebreakoptions.W0203_ADC_MINIMUM_2_TAD"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0204_ADC_TAD_TOO_SMALL"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0205_ADC_UNEXPECTED_TRANSITION"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0206_ADC_SAMP_TIME_TOO_SHORT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0207_ADC_NO_PINS_SCANNED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0208_ADC_UNSUPPORTED_CLOCK_SOURCE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0209_ADC_ANALOG_CHANNEL_DIGITAL"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0210_ADC_ANALOG_CHANNEL_OUTPUT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0211_ADC_PIN_INVALID_CHANNEL"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0212_ADC_BAND_GAP_NOT_SUPPORTED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0213_ADC_RESERVED_SSRC"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0214_ADC_POSITIVE_INPUT_DIGITAL"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0215_ADC_POSITIVE_INPUT_OUTPUT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0216_ADC_NEGATIVE_INPUT_DIGITAL"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0217_ADC_NEGATIVE_INPUT_OUTPUT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0218_ADC_REFERENCE_HIGH_DIGITAL"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0219_ADC_REFERENCE_HIGH_OUTPUT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0220_ADC_REFERENCE_LOW_DIGITAL"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0221_ADC_REFERENCE_LOW_OUTPUT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0222_ADC_OVERFLOW" value="report"/>
+        <property key="warningmessagebreakoptions.W0223_ADC_UNDERFLOW" value="report"/>
+        <property key="warningmessagebreakoptions.W0224_ADC_CTMU_NOT_SUPPORTED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0225_ADC_INVALID_CH0S"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0226_ADC_VBAT_NOT_SUPPORTED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0227_ADC_INVALID_ADCS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0228_ADC_INVALID_ADCS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0229_ADC_INVALID_ADCS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0230_ADC_TRIGSEL_NOT_SUPPORTED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0231_ADC_NOT_WARMED" value="report"/>
+        <property key="warningmessagebreakoptions.W0232_ADC_CALIBRATION_ABORTED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0233_ADC_CORE_POWERED_EARLY"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0234_ADC_ALREADY_CALIBRATING"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0235_ADC_CAL_TYPE_CHANGED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0236_ADC_CAL_INVALIDATED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0237_ADC_UNKNOWN_DATASHEET"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0238_ADC_INVALID_SFR_FIELD_VALUE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0239_ADC_UNSUPPORTED_INPUT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0240_ADC_NOT_CALIBRATED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0241_ADC_FRACTIONAL_NOT_ALLOWED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0242_ADC_BG_INT_BEFORE_PWR"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0243_ADC_INVALID_TAD" value="report"/>
+        <property key="warningmessagebreakoptions.W0244_ADC_CONVERSION_ABORTED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0245_ADC_BUFREGEN_NOT_ALLOWED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0246_ADC_ACCUMULATION_BAD_RESSEL"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0247_ADC_CONVERSION_BAD_RESSEL"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0248_ADC_WR_BEFORE_KEY_SEQ"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0400_PWM_PWM_FASTER_THAN_FOSC"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0600_WDT_2ND_WDT_MR_WRITE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0601_WDT_EXPIRED" value="report"/>
+        <property key="warningmessagebreakoptions.W0601_WDT_RESET_OUTSIDE_WINDOW"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0700_CLC_GENERAL_WARNING"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0701_CLC_CLCOUT_AS_INPUT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0702_CLC_CIRCULAR_LOOP"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0800_ACC_INPUT_INVALID_CONFIG"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0801_ACC_INPUT_NOT_SUPPORTED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0802_ACC_INVERTED_WINDOW_LIMITS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0803_ACC_MISMATCHED_POS_INPUTS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0804_ACC_WINDOW_COMP_DISABLED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0805_ACC_WINDOW_COMPS_MODES"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0806_ACC_FEATURE_NOT_SUPPORTED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W10001_RESERVED_IRQ_HANDLER_INVOKED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W10002_UNSUPPORTED_CLK_SOURCE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W10101_UNSUPPORTED_CHANNEL_MODE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W10102_UNSUPPORTED_CLK_SOURCE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W10103_UNSUPPORTED_RECEIVER_FILTER"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W10301_NO_PORT_PINS_FOUND"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W10500_UNSUPPORTED_SOURCE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W1201_DATAFLASH_MEM_OUTSIDE_RANGE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W1202_DATAFLASH_ERASE_WHILE_LOCKED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W1203_DATAFLASH_WRITE_WHILE_LOCKED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W1401_DMA_PERIPH_NOT_AVAIL"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W1402_DMA_INVALID_IRQ" value="report"/>
+        <property key="warningmessagebreakoptions.W1403_DMA_INVALID_SFR" value="report"/>
+        <property key="warningmessagebreakoptions.W1404_DMA_INVALID_DMA_ADDR"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W1405_DMA_IRQ_DIR_MISMATCH"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W1600_PPS_INVALID_MAP" value="report"/>
+        <property key="warningmessagebreakoptions.W1601_PPS_INVALID_PIN_DESCRIPTION"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W1800_PWM_TIMER_SELECTION_NOT_AVIALABLE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W1801_PWM_TIMER_SELECTION_BAD_CLOCK_INPUT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W1802_PWM_TIMER_MISSING_PERSCALER_INFO"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W2001_INPUTCAPTURE_TMR3_UNAVAILABLE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W2002_INPUTCAPTURE_CAPTURE_EMPTY"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W2003_INPUTCAPTURE_SYNCSEL_NOT_AVIALABLE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W2004_INPUTCAPTURE_BAD_SYNC_SOURCE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W2501_OUTPUTCOMPARE_SYNCSEL_NOT_AVIALABLE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W2502_OUTPUTCOMPARE_BAD_SYNC_SOURCE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W2503_OUTPUTCOMPARE_BAD_TRIGGER_SOURCE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W2700_MPU_ILLEGAL_DREGION"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W2701_MPU_INVALID_REGION"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W3000_LPM_READ_PROTECTION_SECTION"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W3010_SPM_WRITE_PROTECTION_SECTION"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W6001_RTT_FORBIDDEN_RTPRES"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W6002_RTT_BAD_WRITING_ALMV"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W6003_RTT_BAD_WRITING_RTPRES"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W7001_SMT_CLK_SELECTION_NOT_SUPPORT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W7002_SMT_SIG_SELECTION_NOT_SUPPORT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W7003_SMT_WIN_SELECTION_NOT_SUPPORT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W8001_OSC_INVALID_CLOCK_SOURCE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W8002_OSC_RESERVED_FEXTOSC"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9001_TMR_GATE_AND_EXTCLOCK_ENABLED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9002_TMR_NO_PIN_AVAILABLE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9003_TMR_INVALID_CLOCK_SOURCE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9201_UART_TX_OVERFLOW"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9202_UART_TX_CAPTUREFILE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9203_UART_TX_INVALIDINTERRUPTMODE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9204_UART_RX_EMPTY_QUEUE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9205_UART_TX_BADFILE" value="report"/>
+        <property key="warningmessagebreakoptions.W9206_UART_RESERVED_MODE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9207_UART_UNABLETOCLOSE_FILE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9401_CVREF_INVALIDSOURCESELECTION"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9402_CVREF_INPUT_OUTPUTPINCONFLICT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9601_COMP_FVR_SOURCE_UNAVAILABLE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9602_COMP_DAC_SOURCE_UNAVAILABLE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9603_COMP_CVREF_SOURCE_UNAVAILABLE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9604_COMP_SLOPE_SOURCE_UNAVAILABLE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9605_COMP_PRG_SOURCE_UNAVAILABLE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9607_COMP_DGTL_FLTR_OPTION_UNAVAILABLE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9609_COMP_DGTL_FLTR_CLK_UNAVAILABLE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9801_FVR_INVALID_MODE_SELECTION"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9801_SCL_BAD_SUBTYPE_INDICATION"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9802_SCL_FILE_NOT_FOUND"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9803_SCL_FAILED_TO_READ_FILE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9804_SCL_UNRECOGNIZED_LABEL"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9805_SCL_UNRECOGNIZED_VAR"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9901_RTSP_INVALID_OPERATION_SELECTION"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9902_RTSP_FLASH_PROGRAM_WRITE_PROTECTED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.displaywarningmessagesoption"
+                  value=""/>
+        <property key="warningmessagebreakoptions.warningmessages" value="holdstate"/>
+      </Simulator>
       <Tool>
         <property key="AutoSelectMemRanges" value="auto"/>
+        <property key="codecoverage.enabled" value="Disable"/>
+        <property key="codecoverage.enableoutputtofile" value="false"/>
+        <property key="codecoverage.outputfile" value=""/>
         <property key="communication.activationmode" value="nohv"/>
         <property key="communication.interface" value="updi"/>
         <property key="communication.speed" value="0.500"/>
@@ -226,6 +696,24 @@
         <property key="memories.programmemory" value="true"/>
         <property key="memories.programmemory.ranges" value="0-5fff"/>
         <property key="memories.rww" value="true"/>
+        <property key="oscillator.auxfrequency" value="120"/>
+        <property key="oscillator.auxfrequencyunit" value="Mega"/>
+        <property key="oscillator.frequency" value="1"/>
+        <property key="oscillator.frequencyunit" value="Mega"/>
+        <property key="oscillator.rcfrequency" value="250"/>
+        <property key="oscillator.rcfrequencyunit" value="Kilo"/>
+        <property key="periphADC1.altscl" value="false"/>
+        <property key="periphADC1.minTacq" value=""/>
+        <property key="periphADC1.tacqunits" value="microseconds"/>
+        <property key="periphADC2.altscl" value="false"/>
+        <property key="periphADC2.minTacq" value=""/>
+        <property key="periphADC2.tacqunits" value="microseconds"/>
+        <property key="periphComp1.gte" value="gt"/>
+        <property key="periphComp2.gte" value="gt"/>
+        <property key="periphComp3.gte" value="gt"/>
+        <property key="periphComp4.gte" value="gt"/>
+        <property key="periphComp5.gte" value="gt"/>
+        <property key="periphComp6.gte" value="gt"/>
         <property key="poweroptions.powerenable" value="false"/>
         <property key="programoptions.eraseb4program" value="true"/>
         <property key="programoptions.preservedataflash" value="false"/>
@@ -237,11 +725,451 @@
         <property key="programoptions.preserveprogramrange" value="false"/>
         <property key="programoptions.preserveuserid" value="false"/>
         <property key="programoptions.programuserotp" value="false"/>
+        <property key="reset.scl" value="false"/>
+        <property key="reset.type" value="MCLR"/>
         <property key="toolpack.updateoptions"
                   value="toolpack.updateoptions.uselatestoolpack"/>
         <property key="toolpack.updateoptions.packversion"
                   value="Press to select which tool pack to use"/>
+        <property key="tracecontrol.include.timestamp" value="summarydataenabled"/>
+        <property key="tracecontrol.select" value="0"/>
+        <property key="tracecontrol.stallontracebufferfull" value="false"/>
+        <property key="tracecontrol.timestamp" value="0"/>
+        <property key="tracecontrol.tracebufmax" value="546000"/>
+        <property key="tracecontrol.tracefile" value="defmplabxtrace.log"/>
+        <property key="tracecontrol.traceresetonrun" value="false"/>
+        <property key="uart0io.output" value="window"/>
+        <property key="uart0io.outputfile" value=""/>
+        <property key="uart0io.uartioenabled" value="false"/>
+        <property key="uart1io.output" value="window"/>
+        <property key="uart1io.outputfile" value=""/>
+        <property key="uart1io.uartioenabled" value="false"/>
+        <property key="uart2io.output" value="window"/>
+        <property key="uart2io.outputfile" value=""/>
+        <property key="uart2io.uartioenabled" value="false"/>
+        <property key="uart3io.output" value="window"/>
+        <property key="uart3io.outputfile" value=""/>
+        <property key="uart3io.uartioenabled" value="false"/>
+        <property key="uart4io.output" value="window"/>
+        <property key="uart4io.outputfile" value=""/>
+        <property key="uart4io.uartioenabled" value="false"/>
+        <property key="uart5io.output" value="window"/>
+        <property key="uart5io.outputfile" value=""/>
+        <property key="uart5io.uartioenabled" value="false"/>
+        <property key="uart6io.output" value="window"/>
+        <property key="uart6io.outputfile" value=""/>
+        <property key="uart6io.uartioenabled" value="false"/>
+        <property key="usart0io.output" value="window"/>
+        <property key="usart0io.outputfile" value=""/>
+        <property key="usart0io.uartioenabled" value="false"/>
+        <property key="usart1io.output" value="window"/>
+        <property key="usart1io.outputfile" value=""/>
+        <property key="usart1io.uartioenabled" value="false"/>
+        <property key="usart2io.output" value="window"/>
+        <property key="usart2io.outputfile" value=""/>
+        <property key="usart2io.uartioenabled" value="false"/>
+        <property key="usart3io.output" value="window"/>
+        <property key="usart3io.outputfile" value=""/>
+        <property key="usart3io.uartioenabled" value="false"/>
+        <property key="usart4io.output" value="window"/>
+        <property key="usart4io.outputfile" value=""/>
+        <property key="usart4io.uartioenabled" value="false"/>
+        <property key="usartc0io.output" value="window"/>
+        <property key="usartc0io.outputfile" value=""/>
+        <property key="usartc0io.uartioenabled" value="false"/>
+        <property key="usartc1io.output" value="window"/>
+        <property key="usartc1io.outputfile" value=""/>
+        <property key="usartc1io.uartioenabled" value="false"/>
+        <property key="usartd0io.output" value="window"/>
+        <property key="usartd0io.outputfile" value=""/>
+        <property key="usartd0io.uartioenabled" value="false"/>
+        <property key="usartd1io.output" value="window"/>
+        <property key="usartd1io.outputfile" value=""/>
+        <property key="usartd1io.uartioenabled" value="false"/>
+        <property key="usarte0io.output" value="window"/>
+        <property key="usarte0io.outputfile" value=""/>
+        <property key="usarte0io.uartioenabled" value="false"/>
+        <property key="usarte1io.output" value="window"/>
+        <property key="usarte1io.outputfile" value=""/>
+        <property key="usarte1io.uartioenabled" value="false"/>
+        <property key="usarte2io.output" value="window"/>
+        <property key="usarte2io.outputfile" value=""/>
+        <property key="usarte2io.uartioenabled" value="false"/>
+        <property key="usartf0io.output" value="window"/>
+        <property key="usartf0io.outputfile" value=""/>
+        <property key="usartf0io.uartioenabled" value="false"/>
+        <property key="usartf1io.output" value="window"/>
+        <property key="usartf1io.outputfile" value=""/>
+        <property key="usartf1io.uartioenabled" value="false"/>
         <property key="voltagevalue" value=""/>
+        <property key="warningmessagebreakoptions.W0001_CORE_BITREV_MODULO_EN"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0002_CORE_SECURE_MEMORYACCESS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0003_CORE_SW_RESET" value="report"/>
+        <property key="warningmessagebreakoptions.W0004_CORE_WDT_RESET" value="report"/>
+        <property key="warningmessagebreakoptions.W0005_CORE_IOPUW_RESET"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0006_CORE_CODE_GUARD_PFC_RESET"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0007_CORE_DO_LOOP_STACK_UNDERFLOW"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0008_CORE_DO_LOOP_STACK_OVERFLOW"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0009_CORE_NESTED_DO_LOOP_RANGE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0010_CORE_SIM32_ODD_WORDACCESS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0011_CORE_SIM32_UNIMPLEMENTED_RAMACCESS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0012_CORE_STACK_OVERFLOW_RESET"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0013_CORE_STACK_UNDERFLOW_RESET"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0014_CORE_INVALID_OPCODE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0015_CORE_INVALID_ALT_WREG_SET"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0016_CORE_STACK_ERROR"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0017_CORE_ODD_RAMWORDACCESS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0018_CORE_UNIMPLEMENTED_RAMACCESS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0019_CORE_UNIMPLEMENTED_PROMACCESS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0020_CORE_ACCESS_NOTIN_X_SPACE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0021_CORE_ACCESS_NOTIN_Y_SPACE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0022_CORE_XMODEND_LESS_XMODSRT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0023_CORE_YMODEND_LESS_YMODSRT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0024_CORE_BITREV_MOD_IS_ZERO"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0025_CORE_HARD_TRAP" value="report"/>
+        <property key="warningmessagebreakoptions.W0026_CORE_UNIMPLEMENTED_MEMORYACCESS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0027_CORE_UNIMPLEMENTED_EDSACCESS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0028_TBLRD_WORM_CONFIG_MEMORY"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0029_TBLRD_DEVICE_ID" value="report"/>
+        <property key="warningmessagebreakoptions.W0030_CORE_UNIMPLEMENTED_MEMORY_ACCESS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0031_BSLIM_INSUFFICIENT_BOOT_SEGMENT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0032_BSLIM_LIMITS_EXCEEDS_PROG_MEMORY"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0033_CORE_UNPREDICTABLE_OPCODE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0034_CORE_UNALIGNED_MEMORY_ACCESS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0035_CORE_UNIMPLEMENTED_RAMACCESS_NOTRAP"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0040_FPU_DIFF_CP10_CP11"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0041_FPU_ACCESS_DENIED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0042_FPU_PRIVILEGED_ACCESS_ONLY"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0043_FPU_CP_RESERVED_VALUE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0044_FPU_OUT_OF_RANGE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0051_INSTRUCTION_DIV_NOT_ENOUGH_REPEAT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0052_INSTRUCTION_DIV_TOO_MANY_REPEAT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0053_INVALID_INTCON_VS_FIELD_VALUE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0101_SIM_UPDATE_FAILED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0102_SIM_PERIPH_MISSING"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0103_SIM_PERIPH_FAILED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0104_SIM_FAILED_TO_INIT_TOOL"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0105_SIM_INVALID_FIELD"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0106_SIM_PERIPH_PARTIAL_SUPPORT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0107_SIM_NOT_SUPPORTED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0108_SIM_RESERVED_SETTING"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0109_SIM_PERIPHERAL_IN_DEVELOPMENT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0110_SIM_UNEXPECTED_EVENT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0111_SIM_UNSUPPORTED_SELECTION"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0112_SIM_INVALID_OPERATION"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0113_SIM_WRITE_TO_PROTECTED_SFR"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0114_SIM_INVALID_KEY" value="report"/>
+        <property key="warningmessagebreakoptions.W0115_SIM_FAILED_TO_PARSE_DEVICE_FILE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0116_SIM_STACK_OVERFLOW"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0117_SIM_STACK_UNDERFLOW"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0118_SIM_INVALID_FIELD_VALUE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0119_SIM_SAMPLING_RATE_VIOLATION"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0201_ADC_NO_STIMULUS_FILE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0202_ADC_GO_DONE_BIT" value="report"/>
+        <property key="warningmessagebreakoptions.W0203_ADC_MINIMUM_2_TAD"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0204_ADC_TAD_TOO_SMALL"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0205_ADC_UNEXPECTED_TRANSITION"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0206_ADC_SAMP_TIME_TOO_SHORT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0207_ADC_NO_PINS_SCANNED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0208_ADC_UNSUPPORTED_CLOCK_SOURCE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0209_ADC_ANALOG_CHANNEL_DIGITAL"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0210_ADC_ANALOG_CHANNEL_OUTPUT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0211_ADC_PIN_INVALID_CHANNEL"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0212_ADC_BAND_GAP_NOT_SUPPORTED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0213_ADC_RESERVED_SSRC"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0214_ADC_POSITIVE_INPUT_DIGITAL"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0215_ADC_POSITIVE_INPUT_OUTPUT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0216_ADC_NEGATIVE_INPUT_DIGITAL"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0217_ADC_NEGATIVE_INPUT_OUTPUT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0218_ADC_REFERENCE_HIGH_DIGITAL"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0219_ADC_REFERENCE_HIGH_OUTPUT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0220_ADC_REFERENCE_LOW_DIGITAL"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0221_ADC_REFERENCE_LOW_OUTPUT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0222_ADC_OVERFLOW" value="report"/>
+        <property key="warningmessagebreakoptions.W0223_ADC_UNDERFLOW" value="report"/>
+        <property key="warningmessagebreakoptions.W0224_ADC_CTMU_NOT_SUPPORTED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0225_ADC_INVALID_CH0S"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0226_ADC_VBAT_NOT_SUPPORTED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0227_ADC_INVALID_ADCS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0228_ADC_INVALID_ADCS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0229_ADC_INVALID_ADCS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0230_ADC_TRIGSEL_NOT_SUPPORTED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0231_ADC_NOT_WARMED" value="report"/>
+        <property key="warningmessagebreakoptions.W0232_ADC_CALIBRATION_ABORTED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0233_ADC_CORE_POWERED_EARLY"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0234_ADC_ALREADY_CALIBRATING"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0235_ADC_CAL_TYPE_CHANGED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0236_ADC_CAL_INVALIDATED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0237_ADC_UNKNOWN_DATASHEET"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0238_ADC_INVALID_SFR_FIELD_VALUE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0239_ADC_UNSUPPORTED_INPUT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0240_ADC_NOT_CALIBRATED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0241_ADC_FRACTIONAL_NOT_ALLOWED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0242_ADC_BG_INT_BEFORE_PWR"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0243_ADC_INVALID_TAD" value="report"/>
+        <property key="warningmessagebreakoptions.W0244_ADC_CONVERSION_ABORTED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0245_ADC_BUFREGEN_NOT_ALLOWED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0246_ADC_ACCUMULATION_BAD_RESSEL"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0247_ADC_CONVERSION_BAD_RESSEL"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0248_ADC_WR_BEFORE_KEY_SEQ"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0400_PWM_PWM_FASTER_THAN_FOSC"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0600_WDT_2ND_WDT_MR_WRITE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0601_WDT_EXPIRED" value="report"/>
+        <property key="warningmessagebreakoptions.W0601_WDT_RESET_OUTSIDE_WINDOW"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0700_CLC_GENERAL_WARNING"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0701_CLC_CLCOUT_AS_INPUT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0702_CLC_CIRCULAR_LOOP"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0800_ACC_INPUT_INVALID_CONFIG"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0801_ACC_INPUT_NOT_SUPPORTED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0802_ACC_INVERTED_WINDOW_LIMITS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0803_ACC_MISMATCHED_POS_INPUTS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0804_ACC_WINDOW_COMP_DISABLED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0805_ACC_WINDOW_COMPS_MODES"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0806_ACC_FEATURE_NOT_SUPPORTED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W10001_RESERVED_IRQ_HANDLER_INVOKED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W10002_UNSUPPORTED_CLK_SOURCE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W10101_UNSUPPORTED_CHANNEL_MODE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W10102_UNSUPPORTED_CLK_SOURCE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W10103_UNSUPPORTED_RECEIVER_FILTER"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W10301_NO_PORT_PINS_FOUND"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W10500_UNSUPPORTED_SOURCE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W1201_DATAFLASH_MEM_OUTSIDE_RANGE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W1202_DATAFLASH_ERASE_WHILE_LOCKED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W1203_DATAFLASH_WRITE_WHILE_LOCKED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W1401_DMA_PERIPH_NOT_AVAIL"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W1402_DMA_INVALID_IRQ" value="report"/>
+        <property key="warningmessagebreakoptions.W1403_DMA_INVALID_SFR" value="report"/>
+        <property key="warningmessagebreakoptions.W1404_DMA_INVALID_DMA_ADDR"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W1405_DMA_IRQ_DIR_MISMATCH"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W1600_PPS_INVALID_MAP" value="report"/>
+        <property key="warningmessagebreakoptions.W1601_PPS_INVALID_PIN_DESCRIPTION"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W1800_PWM_TIMER_SELECTION_NOT_AVIALABLE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W1801_PWM_TIMER_SELECTION_BAD_CLOCK_INPUT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W1802_PWM_TIMER_MISSING_PERSCALER_INFO"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W2001_INPUTCAPTURE_TMR3_UNAVAILABLE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W2002_INPUTCAPTURE_CAPTURE_EMPTY"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W2003_INPUTCAPTURE_SYNCSEL_NOT_AVIALABLE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W2004_INPUTCAPTURE_BAD_SYNC_SOURCE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W2501_OUTPUTCOMPARE_SYNCSEL_NOT_AVIALABLE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W2502_OUTPUTCOMPARE_BAD_SYNC_SOURCE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W2503_OUTPUTCOMPARE_BAD_TRIGGER_SOURCE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W2700_MPU_ILLEGAL_DREGION"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W2701_MPU_INVALID_REGION"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W3000_LPM_READ_PROTECTION_SECTION"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W3010_SPM_WRITE_PROTECTION_SECTION"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W6001_RTT_FORBIDDEN_RTPRES"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W6002_RTT_BAD_WRITING_ALMV"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W6003_RTT_BAD_WRITING_RTPRES"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W7001_SMT_CLK_SELECTION_NOT_SUPPORT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W7002_SMT_SIG_SELECTION_NOT_SUPPORT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W7003_SMT_WIN_SELECTION_NOT_SUPPORT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W8001_OSC_INVALID_CLOCK_SOURCE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W8002_OSC_RESERVED_FEXTOSC"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9001_TMR_GATE_AND_EXTCLOCK_ENABLED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9002_TMR_NO_PIN_AVAILABLE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9003_TMR_INVALID_CLOCK_SOURCE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9201_UART_TX_OVERFLOW"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9202_UART_TX_CAPTUREFILE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9203_UART_TX_INVALIDINTERRUPTMODE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9204_UART_RX_EMPTY_QUEUE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9205_UART_TX_BADFILE" value="report"/>
+        <property key="warningmessagebreakoptions.W9206_UART_RESERVED_MODE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9207_UART_UNABLETOCLOSE_FILE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9401_CVREF_INVALIDSOURCESELECTION"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9402_CVREF_INPUT_OUTPUTPINCONFLICT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9601_COMP_FVR_SOURCE_UNAVAILABLE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9602_COMP_DAC_SOURCE_UNAVAILABLE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9603_COMP_CVREF_SOURCE_UNAVAILABLE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9604_COMP_SLOPE_SOURCE_UNAVAILABLE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9605_COMP_PRG_SOURCE_UNAVAILABLE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9607_COMP_DGTL_FLTR_OPTION_UNAVAILABLE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9609_COMP_DGTL_FLTR_CLK_UNAVAILABLE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9801_FVR_INVALID_MODE_SELECTION"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9801_SCL_BAD_SUBTYPE_INDICATION"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9802_SCL_FILE_NOT_FOUND"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9803_SCL_FAILED_TO_READ_FILE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9804_SCL_UNRECOGNIZED_LABEL"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9805_SCL_UNRECOGNIZED_VAR"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9901_RTSP_INVALID_OPERATION_SELECTION"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9902_RTSP_FLASH_PROGRAM_WRITE_PROTECTED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.displaywarningmessagesoption"
+                  value=""/>
+        <property key="warningmessagebreakoptions.warningmessages" value="holdstate"/>
       </Tool>
       <XC8-CO>
         <property key="coverage-enable" value=""/>